Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your myGEKOgear Orbit 122 Vehicle Camera. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Package Contents
Verify that all items listed below are included in your package:
- myGEKOgear Orbit 122 Dash Cam
- 2 Blindspot Mirrors
- Windshield Suction Mount
- 12-24V Car Charger
- 8GB microSD Card with adapter
- Quick User Guide
Image: The myGEKOgear Orbit 122 Dash Cam shown alongside two circular blind spot mirrors, representing the package contents.
Product Overview
Familiarize yourself with the components of your Orbit 122 Vehicle Camera.
Front View
Image: The front of the myGEKOgear Orbit 122 Dash Cam, featuring the main camera lens with "FULL HD F=2.0/f=3.2mm DIGITAL CAMCORDER" text around it.
- Camera Lens: Captures Full HD 1080P video with a 120° Field of View.
- Speaker: For audio playback and alerts.
Side View (Buttons)
Image: Side view of the dash cam, displaying three control buttons: an up arrow (likely for navigation/Wi-Fi), an 'OK' button, and a down arrow (likely for navigation).
- Up/Down Buttons: For menu navigation and selection.
- OK Button: Confirms selections and starts/stops recording.
Side View (Ports)
Image: The opposite side view of the dash cam, showing a USB port, a power button, and another button (possibly for mode or menu).
- USB Port: For power connection and data transfer.
- Power Button: To manually turn the device on/off.
- Mode/Menu Button: To switch between recording modes or access settings.
Top/Bottom View (Ports)
Image: Top view of the dash cam, showing a "TF" card slot for the microSD card and a "MIC" label for the microphone.
- TF Card Slot: Insert the provided microSD card here for video storage.
- Microphone: Records audio inside the vehicle.
Setup
Follow these steps to install and power your dash cam:
- Mounting: Attach the windshield suction mount to a clean, dry area on your vehicle's windshield, ensuring it does not obstruct your view. Secure the dash cam to the mount.
- Insert MicroSD Card: Insert the provided 8GB microSD card into the TF card slot on the dash cam. Ensure it is inserted correctly until it clicks into place.
- Power Connection: Connect the 12-24V car charger to the USB port on the dash cam. Route the cable neatly along the windshield and dashboard to your vehicle's cigarette lighter socket or auxiliary power outlet.
- Power On: Start your vehicle. The dash cam will automatically power on and begin recording. If it does not power on automatically, press the power button.
Video: This video demonstrates the installation process for a myGEKOgear dash cam (Orbit 110 model, similar to Orbit 122). It shows how to mount the camera, connect the power cable, and route it for a tidy setup. The dash cam powers on automatically when the car starts.
Operating Instructions
The Orbit 122 is designed for straightforward operation.
- Automatic Recording: Once powered on, the dash cam will automatically begin recording in Full HD 1080P. The 120° Field of View ensures wide coverage of the road.
- G-Sensor for Emergency Files: The built-in G-sensor detects sudden impacts, sharp turns, or hard braking. When such an event occurs, the current video segment is automatically locked and saved to prevent it from being overwritten by loop recording. This feature provides crucial evidence in case of an incident.
- Loop Recording: The dash cam continuously records. When the memory card is full, the oldest unlocked files are automatically overwritten to make space for new recordings. Locked files are protected.
- Playback: Use the navigation buttons and OK button to access the menu and review recorded videos directly on the dash cam's screen.
Maintenance
To ensure optimal performance and longevity of your dash cam:
- Cleaning: Gently wipe the camera lens and screen with a soft, lint-free cloth. Avoid abrasive cleaners.
- MicroSD Card: Periodically format the microSD card (e.g., once a month) to maintain its performance and prevent data corruption. Back up any important files before formatting.
- Temperature: Avoid exposing the dash cam to extreme temperatures for extended periods.
- Firmware Updates: Check the myGEKOgear website for any available firmware updates to improve performance and add features.
Troubleshooting
If you encounter issues with your Orbit 122, refer to the following common solutions:
| Problem | Solution |
|---|---|
| Dash cam does not power on. | Ensure the car charger is securely connected to both the dash cam and the vehicle's power outlet. Verify the vehicle's power outlet is functioning. Try manually pressing the power button. |
| "Memory Full" error or not recording. | Format the microSD card through the dash cam's menu. Ensure loop recording is enabled. Replace the microSD card if the issue persists, as it may be faulty. |
| Poor video quality. | Clean the camera lens. Ensure the protective film has been removed from the lens. Check video resolution settings in the menu to confirm it's set to 1080P. |
| G-sensor not triggering or too sensitive. | Adjust the G-sensor sensitivity setting in the dash cam's menu. Lower sensitivity for fewer false triggers, higher for more detection. |
Specifications
| Feature | Detail |
|---|---|
| Brand | myGEKOgear |
| Model Name | GO1228G |
| Video Capture Resolution | 1080p Full HD |
| Field Of View | 120 Degrees |
| Special Feature | Auto Incident Recording (G-Sensor) |
| Connectivity Technology | USB |
| Mounting Type | Suction Mount |
| Item Weight | 4 ounces |
| Product Dimensions | 2 x 2 x 1 inches |
| Color | Black |
| Batteries | 1 Lithium Ion battery required (included) |
| Manufacturer | PAPAGO Inc |
Warranty and Support
For warranty information or technical support, please refer to the official myGEKOgear website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
