Gateman WV200 Digital Door Lock User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Gateman WV200 Digital Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Image 1: The Gateman WV200 Digital Door Lock, showcasing its sleek design and the included RFID key tags for convenient access.

1.1. Key Features

• Keyless Entry: Access via PIN code or RFID card.
• Master Mode: Enhanced security and management capabilities.
• Dual Lock Function: Provides additional security from the inside.
• Anti-Panic Function: Allows quick exit in emergencies.
• Fake Number Function: Prevents PIN exposure by allowing entry of random numbers before or after the actual PIN.
• Volume Control: Adjustable sound settings for operation.
• Battery Alert: Notifies users when battery levels are low.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Do not attempt to disassemble or repair the lock yourself. Contact qualified service personnel.
• Avoid exposing the lock to direct water or excessive moisture.
• Use only recommended battery types.
• Keep PIN codes confidential and change them regularly.
• Ensure the door closes completely before engaging the lock.

3. Setup and Installation

Proper installation is crucial for the optimal performance of your digital door lock. It is recommended that installation be performed by a qualified technician.

3.1. Door Compatibility

The Gateman WV200 is designed for specific door types. Refer to the diagram below to determine if your door is compatible.

Image 2: This diagram illustrates various door types, categorizing them as 'Installable door' or 'Non-installable door' to guide users on compatibility for the lock's installation.

3.2. Installation Steps (Overview)

While professional installation is advised, the general steps involve:

1. Prepare the door by drilling necessary holes according to the template (not provided in this manual).
2. Install the mortise lock into the door edge.
3. Mount the exterior and interior units, connecting the wiring harness.
4. Secure all components and test the mechanical operation of the handle and latch.
5. Insert batteries and configure initial settings.

4. Operating Instructions

4.1. Setting Up PIN Codes

To register a new PIN code:

1. Open the battery cover on the interior unit.
2. Press the 'Registration' button.
3. Enter your desired 4-12 digit PIN code on the exterior keypad.
4. Press the '*' button to confirm.

4.2. Using the Fake Number Function

This feature enhances security by allowing you to enter random numbers before or after your actual PIN code. This prevents others from guessing your PIN by observing fingerprint smudges.

Image 3: A hand interacting with the digital keypad, demonstrating the 'Parm Touch & Fake Number Function' which allows users to input random digits before or after their actual PIN for enhanced security.

4.3. Registering RFID Cards

To register an RFID card or tag:

1. Open the battery cover on the interior unit.
2. Press the 'Registration' button.
3. Place the RFID card on the card reader area of the exterior unit.
4. The lock will emit a confirmation sound.

4.4. 2-Way Authentication Method

For increased security, the lock supports a 2-way authentication method, requiring both a PIN code and an RFID card for entry.

Image 4: This image highlights the 'Battery Alert' indicator, the 'Volume Control Function' dial on the side, and demonstrates the '2-way authentication method' by showing an RFID card being presented to the lock's reader.

4.5. Dual Lock Function

The dual lock function provides an extra layer of security, preventing unauthorized entry even if the main lock is compromised. This is typically engaged from the interior unit.

Image 5: An internal view of the door lock mechanism, clearly showing the switch for the 'Dual Lock Function' which provides enhanced security from the inside.

4.6. Anti-Panic & Etiquette Function

The anti-panic function allows you to open the door from the inside simply by pushing down the handle, even if the lock is engaged. The etiquette function allows for silent operation.

Image 6: A hand is shown operating the door handle, illustrating the 'Anti-Panic & Etiquette Function' which allows for quick exit and quiet operation.

4.7. Safe Handle Function

This feature prevents accidental unlocking from the inside, especially useful in households with small children or pets. It requires a specific action to engage the handle for opening.

Image 7: The upper section of the interior lock unit is displayed, highlighting the 'Safe handle function' mechanism designed to prevent unintended opening.

5. Maintenance

5.1. Battery Replacement

The lock will provide a 'Battery Alert' when the battery level is low. Replace all batteries simultaneously with new ones of the recommended type (typically AA alkaline batteries). Do not mix old and new batteries or different battery types.

5.2. Cleaning

Wipe the lock's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or electronic components.

6. Troubleshooting

6.1. 3 Minute Lock

If multiple incorrect PIN attempts are made, the lock will enter a '3 Minute Lock' state, during which the keypad will be temporarily disabled. Wait for the 3-minute period to expire before attempting to enter the PIN again.

Image 8: The digital keypad is shown with a prominent padlock icon, signifying the '3 Minute Lock' feature which temporarily disables the keypad after multiple incorrect entry attempts.

6.2. Common Issues

• Lock not responding: Check battery levels and replace if necessary. Ensure the door is properly aligned.
• PIN not working: Verify the correct PIN is being entered. Ensure the lock is not in a '3 Minute Lock' state.
• RFID card not recognized: Ensure the card is correctly registered. Try repositioning the card on the reader.

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your local Gateman distributor. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the official Gateman website or contact their customer service department.