CubicFun DS1009H Harry Potter Diagon Alley 3D Puzzle Instruction Manual

1. Introduction

This manual provides detailed instructions for assembling your CubicFun DS1009H Harry Potter Diagon Alley 3D Puzzle. This model allows you to construct iconic locations from Diagon Alley, including Gringotts Bank, Quality Quidditch Supplies, Ollivanders, and Zonko's Joke Shop. The puzzle is designed for an engaging and educational building experience, requiring no tools or glue for assembly.

This image displays the fully assembled Diagon Alley 3D puzzle, featuring the detailed structures of Gringotts Bank, Quality Quidditch Supplies, Ollivanders, and Zonko's Joke Shop.

2. Safety Information

• Recommended Age: This puzzle is recommended for ages 8 years and up.
• Small Parts: The puzzle contains small parts which may pose a choking hazard for young children. Keep out of reach of children under 3 years old.
• Material: The puzzle pieces are made from cardboard. Avoid exposure to water or excessive humidity to prevent damage.

3. Package Contents

Upon opening the package, please verify that all components are present:

• Cardboard sheets with approximately 273 puzzle pieces.
• Instruction Manual (this document).
• Poster (included component).

This image shows the various components included in the puzzle package, such as the cardboard sheets with puzzle pieces and the instruction manual.

4. Setup and Assembly Instructions

Follow these steps to assemble your Diagon Alley 3D Puzzle. No tools or glue are required.

1. Preparation: Unpack all contents. Carefully detach the puzzle pieces from the cardboard sheets. It is recommended to organize pieces by their corresponding numbers or sections as indicated in the instruction manual.
2. Identify Pieces: Each puzzle piece is numbered. Refer to the included instruction manual for the correct sequence and placement of pieces.
3. Interlock Pieces: Gently interlock the pieces according to the visual guides in the manual. Ensure that connections are secure but avoid forcing pieces, which could cause damage.
4. Build Structures: Assemble each building (Gringotts Bank, Quality Quidditch Supplies, Ollivanders, Zonko's Joke Shop) individually as per the instructions.
5. Combine Structures: Once individual buildings are complete, connect them to form the complete Diagon Alley scene.

This image illustrates the assembly process, showing a user holding a puzzle piece with the instruction manual open, highlighting the numbered pieces for easy identification.

The estimated assembly time is approximately 240 minutes (4 hours).

5. Maintenance

To ensure the longevity of your assembled 3D puzzle:

• Cleaning: Dust the assembled model gently with a soft, dry cloth or a soft brush. Do not use liquid cleaners.
• Storage: Keep the puzzle in a dry environment, away from direct sunlight and extreme temperatures, to prevent fading or warping of the cardboard material.
• Handling: Handle the assembled model with care to avoid accidental damage to the interlocking pieces.

6. Troubleshooting

• Pieces Not Fitting: Ensure you are using the correct pieces for the designated slots. Refer to the numbering and diagrams in the instruction manual. Do not force pieces together.
• Missing Pieces: Double-check all cardboard sheets and packaging. If a piece is genuinely missing, contact CubicFun customer support (contact information typically found on the product packaging or official website).
• Model Instability: Ensure all interlocking tabs are fully inserted and secured. Re-examine connections for any loose points.

7. Specifications

This image provides the approximate dimensions of the assembled Diagon Alley 3D puzzle, showing a length of 58cm, width of 17cm, and height of 21.1cm.

8. Warranty and Support

For warranty information or customer support regarding your CubicFun DS1009H Harry Potter Diagon Alley 3D Puzzle, please refer to the contact details provided on the product packaging or visit the official CubicFun website. Keep your proof of purchase for any warranty claims.