Whirlpool CG 601 HAC HOOD 60cm Autoclean Baffle Filter Kitchen Chimney User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Whirlpool CG 601 HAC HOOD kitchen chimney. Please read these instructions carefully before using the appliance and retain them for future reference.

Figure 1: Whirlpool CG 601 HAC HOOD Kitchen Chimney

2. Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.

• Ensure the power supply voltage matches the rating indicated on the appliance.
• Do not operate the chimney if the power cord or plug is damaged.
• Keep children away from the appliance during operation and cleaning.
• Do not flambé under the range hood.
• Clean the baffle filters regularly to prevent grease buildup, which can be a fire hazard.
• Ensure adequate ventilation in the room when the range hood is used simultaneously with gas or other fuel-burning appliances.
• Installation must be performed by a qualified technician.

3. Package Contents

Verify that all items are present in the package:

• 1 x Whirlpool CG 601 HAC HOOD Kitchen Chimney
• 1 x User Manual (this document)
• 1 x Warranty Card
• Installation accessories (screws, wall plugs, etc. - may vary)

4. Specifications

5. Installation

The Whirlpool CG 601 HAC HOOD is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and safety.

5.1 Pre-Installation Checklist

• Ensure the wall is strong enough to support the chimney's weight.
• Verify that the power outlet is within reach and meets voltage requirements.
• Confirm the availability of a proper ventilation duct for ducted operation.
• Maintain the recommended distance between the cooking surface and the chimney (refer to local regulations or product manual for exact measurements).

5.2 Mounting the Chimney

1. Mark the drilling points on the wall according to the provided mounting template.
2. Drill holes and insert wall plugs.
3. Secure the mounting bracket to the wall.
4. Carefully lift and attach the chimney unit to the mounting bracket.
5. Connect the exhaust ducting to the chimney outlet and route it to the external vent. Ensure all connections are sealed to prevent air leakage.
6. Install the decorative chimney covers, if applicable.

Figure 2: Chimney installed in a kitchen

6. Operation

Your Whirlpool CG 601 HAC HOOD chimney features a touch control panel and gesture control for convenient operation.

6.1 Touch Control Panel

The touch control panel allows direct access to all functions:

• Power Button: Turns the chimney on or off.
• Speed Control: Adjusts suction speed (Low, Medium, High).
• Light Button: Controls the LED lighting.
• Auto Clean Button: Initiates the heat auto-clean cycle.

Figure 3: Touch Control Panel

6.2 Gesture Control

Motion sensing technology enables hands-free operation:

• Wave Left to Right: Increases fan speed.
• Wave Right to Left: Decreases fan speed or turns off.

Figure 4: Gesture Control in action

6.3 LED Lighting

The built-in LED lamps provide illumination for your cooking area. Activate them using the light button on the control panel.

Figure 5: In-Built LED Lamp

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your chimney.

7.1 Heat Auto Clean Technology

The Heat Auto Clean feature uses a heating element to melt and collect sticky oil particles from the internal components. To activate:

1. Press the 'Auto Clean' button on the control panel.
2. The chimney will run a cleaning cycle.
3. The collected oil will drain into the oil collector.

Figure 6: Heat Auto Clean Technology

7.2 Baffle Filter Cleaning

The stainless steel baffle filters are designed to separate grease from cooking fumes. They should be cleaned regularly, typically once a month depending on usage.

1. Turn off the chimney and disconnect it from the power supply.
2. Carefully remove the baffle filters by releasing their latches.
3. Wash the filters with warm water and a degreasing detergent. For stubborn grease, soak them for a while.
4. Rinse thoroughly and allow them to dry completely before re-installing.

Figure 7: Stainless Steel Baffle Filter

7.3 Oil Collector

The built-in oil collector gathers the oil and residue from the auto-clean process. Empty and clean it regularly.

1. Ensure the chimney is off and cool.
2. Locate the oil collector tray, usually at the bottom of the chimney.
3. Carefully slide out the tray.
4. Dispose of the collected oil and wash the tray with warm soapy water.
5. Dry thoroughly and re-insert the tray.

Figure 8: Oil Collector

8. Troubleshooting

Refer to the table below for common issues and their solutions.

If the problem persists after attempting these solutions, please contact Whirlpool customer support.

9. Warranty and Support

9.1 Warranty Information

Your Whirlpool CG 601 HAC HOOD kitchen chimney comes with a comprehensive warranty:

• Motor: 10 years from the date of purchase.
• Comprehensive: 5 years from the date of purchase.

Please retain your purchase invoice and warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions.

9.2 Customer Support

For any queries, service requests, or further information, please contact Whirlpool customer support:

• Email: helpdeskindia@whirlpool.com
• Toll-Free Number: 1800 208 1800
• Manufacturer Address: Whirlpool of India Ltd. Plot No. A-4, MIDC Ranjangaon, Taluka Shirur, Dist: Pune, Maharashtra 412220, India.

Figure 9: Whirlpool Customer Care Information

10. Product Overview Video

Watch this video for a quick overview of the Whirlpool CG 601 HAC HOOD kitchen chimney's features and benefits.