VECELO B08CZNX97C

VECELO Dining Table Set with 4 Chairs

Model: B08CZNX97C - Retro Brown

Introduction

This manual provides detailed instructions for the assembly, safe use, and maintenance of your VECELO Dining Table Set. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

VECELO Dining Table Set with 4 Chairs in Retro Brown

Image: The VECELO Dining Table Set, featuring a rectangular retro brown table and four black chairs, arranged in a dining room setting.

Safety Information

  • Always follow assembly instructions precisely to ensure structural integrity and safety.
  • Chairs can be pulled out and may tip over if not used carefully. Avoid leaning back excessively or standing on chairs.
  • Do not use harsh liquids or abrasive cleaners on the table or chairs. Refer to the maintenance section for proper cleaning.
  • Ensure all screws and fasteners are securely tightened before use and periodically check for looseness.
  • Keep small parts away from children during assembly to prevent choking hazards.

Package Contents

Before assembly, verify that all components listed below are present in your package:

  • 1 x Dining Table
  • 4 x Chairs
  • 1 x Instruction Manual (this document)
  • 1 x Accessory Bag (containing all necessary hardware and tools)

Setup and Assembly

Assembly is required for this dining set. All necessary parts and tools are included and clearly labeled. Follow the step-by-step instructions provided in the separate assembly guide included in your package. The simple structure facilitates straightforward setup.

Key Assembly Tips:

  • Lay out all components on a soft, clean surface to prevent scratches.
  • Identify each part using the diagrams in the assembly guide.
  • Do not fully tighten screws until all parts are loosely assembled to allow for adjustments.
  • Ensure the table and chairs are level after assembly. Adjust as needed.
Dimensions of VECELO Dining Table and Chair

Image: Detailed dimensions of the VECELO dining table (42" L x 31.4" W x 30" H) and a single chair (15.7" L x 15.9" W x 33.8" H, seat height 17").

Operating and Usage

The VECELO Dining Table Set is designed to comfortably seat up to four individuals. Its compact design allows for efficient use of space.

  • Seating Capacity: The set is designed for four people.
  • Space-Saving Feature: The chairs can be neatly tucked under the table when not in use, optimizing space in smaller areas.
  • Chair Capacity: Each chair has a maximum weight capacity of 275 lbs.
VECELO Dining Table Set with chairs tucked underneath for space saving

Image: The VECELO Dining Table Set demonstrating its space-saving design, with all four chairs neatly pushed under the table.

Maintenance

Proper care will extend the life and appearance of your dining set.

  • Cleaning: Wipe the table and chair surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth followed immediately by a dry cloth can be used.
  • Avoid: Do not use abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the finish.
  • Regular Checks: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.

Troubleshooting

If you encounter any issues with your dining set, consider the following common solutions:

  • Wobbly Table/Chairs: Ensure all assembly screws are fully tightened. Check if the floor is uneven; use furniture pads if necessary.
  • Missing Parts: Double-check the accessory bag and packaging. If parts are genuinely missing, contact VECELO customer support.
  • Difficulty Assembling: Review the assembly instructions carefully. Sometimes, parts may be oriented incorrectly. Disassemble and re-assemble, ensuring correct alignment before tightening.

Specifications

BrandVECELO
Model NumberB08CZNX97C
ColorRetro Brown
Material TypeMDF+Metal
Dining Table Overall Dimension42(L) x 31.4(W) x 30(H) inches
Chair Dimension15.7(L) x 15.9(W) x 33.8(H) inches
Item Weight60 Pounds
Seating Capacity4
Required AssemblyYes

Warranty and Support

VECELO provides an 18-MONTH Warranty for every dining table set sold. This warranty covers manufacturing defects and issues arising from normal use.

If you experience any problems with the product you received, including missing parts, damaged components, or functional issues, please contact VECELO customer service. We are committed to providing free replacement parts or a brand new item for replacement to ensure your satisfaction.

For customer support, please refer to the contact information provided on your purchase receipt or the VECELO official website.