1. Important Safety Information
Please read this manual carefully before using your Faber dishwasher. Keep it for future reference. This section contains vital information for safe operation and to prevent personal injury or property damage.
- Always disconnect the appliance from the power supply before cleaning or maintenance.
- Do not allow children to operate, play with, or crawl inside the dishwasher.
- Use only detergents and rinse aids specifically designed for automatic dishwashers.
- Sharp items should be loaded with points and sharp edges down to avoid injury.
- Do not operate the dishwasher if the power cord or plug is damaged.
- Ensure proper grounding of the appliance.
2. Product Overview
The Faber FFSD 6PR 12S is a 12 place setting freestanding dishwasher designed for efficient cleaning of your dishes. It features multiple wash programs and indicators for optimal performance.
Figure 2.1: Front view of the Faber FFSD 6PR 12S Dishwasher. This image displays the sleek black exterior and the integrated control panel at the top.
Figure 2.2: Side view of the Faber FFSD 6PR 12S Dishwasher with key dimensions: 845 mm height, 600 mm depth, and 598 mm width. This helps in planning installation space.
3. Setup and Installation
This section guides you through the initial setup of your dishwasher. For detailed installation, it is recommended to contact a qualified technician.
3.1 Unpacking
- Carefully remove all packaging materials.
- Inspect the dishwasher for any shipping damage. Report any damage immediately to your retailer.
- Ensure all included components are present: 1 Dishwasher unit, Inlet pipe, Outlet pipe, and User Manual.
3.2 Placement
- The dishwasher is designed as a freestanding unit.
- Place the dishwasher on a level, stable surface near a water supply, drain, and electrical outlet.
- Ensure adequate clearance around the unit for proper ventilation and door opening.
- For visual reference of size, refer to Figure 3.1.
Figure 3.1: The Faber FFSD 6PR 12S Dishwasher shown next to a person, illustrating its approximate height of 845 mm relative to an average adult.
3.3 Water and Drain Connections
- Connect the inlet pipe to a cold water supply with a minimum pressure of 0.04 MPa and a maximum of 1 MPa.
- Securely connect the outlet pipe to a drain system, ensuring it is not kinked or obstructed.
- Verify all connections are tight to prevent leaks.
3.4 Electrical Connection
- Connect the dishwasher to a properly grounded 220V electrical outlet.
- Do not use extension cords or adapters.
4. Operating Instructions
Follow these steps for effective and safe operation of your Faber dishwasher.
4.1 Loading the Dishwasher
Proper loading ensures optimal cleaning performance. The dishwasher has 12 place settings, suitable for families up to 6 members.
Figure 4.1: Interior view of the dishwasher showing the upper and lower racks, and the cutlery basket. The racks are designed for flexible loading.
- Scrape off large food particles from dishes before loading.
- Place larger items like pots and pans in the lower rack.
- Load glasses, cups, and smaller plates in the upper rack. The upper rack is height-adjustable.
- Place cutlery in the designated basket with handles down for forks and spoons, and handles up for knives to ensure safety.
- Ensure dishes do not block the spray arms.
Figure 4.2: The dishwasher interior loaded with a typical set of dishes, demonstrating proper placement for effective washing.
4.2 Adding Detergent, Salt, and Rinse Aid
- Detergent: Add the appropriate amount of dishwasher detergent to the dispenser. Refer to the detergent manufacturer's instructions.
- Dishwasher Salt: Fill the salt dispenser with dishwasher salt to prevent limescale buildup, especially in hard water areas. The salt indicator will illuminate when refilling is needed.
- Rinse Aid: Fill the rinse aid dispenser. Rinse aid helps with drying and prevents water spots. The rinse aid indicator will illuminate when refilling is needed.
4.3 Selecting a Wash Program
The dishwasher offers 6 washing programs:
Figure 4.3: Close-up of the dishwasher's control panel, showing the LED display and program selection buttons.
- Intensive: For heavily soiled dishes, pots, and pans.
- Normal: For normally soiled daily dishes.
- Eco: An economical program for normally soiled dishes, optimizing water and energy consumption.
- Glass: For lightly soiled glassware and delicate items.
- 90 Minutes: For lightly soiled dishes that need a quicker wash.
- Rapid: A very quick wash for lightly soiled dishes without drying.
To select a program, press the program button until the desired program indicator lights up on the LED display. Close the dishwasher door to start the cycle.
5. Maintenance and Care
Regular maintenance ensures the longevity and optimal performance of your dishwasher.
5.1 Cleaning the Filters
- The filter system prevents larger food particles from reaching the pump. Clean the filters regularly (weekly or bi-weekly).
- Twist the cylindrical filter counter-clockwise and lift it out.
- Remove the fine filter from the bottom of the wash tub.
- Rinse all filters under running water to remove food particles. Use a soft brush if necessary.
- Reassemble the filters in reverse order, ensuring they are securely in place.
5.2 Cleaning the Spray Arms
- Check the spray arm nozzles for blockages from food particles.
- If blocked, remove the spray arms and clean the holes with a thin wire or toothpick.
- Rinse thoroughly and reattach.
5.3 Exterior and Interior Cleaning
- Wipe the exterior surfaces with a damp cloth and mild detergent. Avoid abrasive cleaners.
- Clean the door seal regularly to remove food residue and prevent odors.
- Run a dishwasher cleaning cycle periodically using a specialized dishwasher cleaner.
6. Troubleshooting Guide
Before contacting customer service, refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher does not start | Power cord not plugged in; Door not closed properly; Fuse blown. | Ensure power cord is securely plugged in; Close the door firmly; Check household fuse/circuit breaker. |
| Dishes are not clean | Improper loading; Clogged spray arms; Insufficient detergent; Incorrect program selected; Clogged filters. | Reload dishes correctly; Clean spray arm nozzles; Add sufficient detergent; Select appropriate wash program; Clean filters. |
| Water remains in the tub | Clogged drain hose; Clogged filters; Drain pump malfunction. | Check and clear drain hose; Clean filters; Contact service if pump issue persists. |
| White spots on dishes | Lack of dishwasher salt; Insufficient rinse aid; Hard water. | Refill dishwasher salt; Refill rinse aid; Adjust water softener setting if available. |
| Excessive noise | Dishes rattling; Foreign object in pump; Improper installation. | Rearrange dishes; Check for and remove foreign objects; Ensure dishwasher is level. |
7. Technical Specifications
Detailed specifications for the Faber FFSD 6PR 12S Dishwasher.
| Model Name | FFSD 6PR 12S BK |
| Brand | Faber |
| Capacity | 12 Place Settings (12 litres) |
| Installation Type | Freestanding |
| Controls Type | Semi Integrated |
| Material | Stainless Steel |
| Noise Level | 49 Decibels (Note: Feature bullets mention 62 dB, primary specification is 49 dB) |
| Voltage | 220 Volts |
| Energy Consumption | 1.6 Kilowatt Hours (per cycle) |
| Annual Energy Consumption | 335 Kilowatt Hours Per Year |
| Water Consumption | 10-17 Liters (depending on program) |
| Cycle Options | 6 Programs (Intensive, Normal, Eco, Glass, 90 Minutes, Rapid) |
| Energy Efficiency Rating | A++/A/A (energy, cleaning, drying) |
| Item Weight | 20 kg |
| Item Dimensions (LxWxH) | 60 x 60 x 85 Centimeters |
| Included Components | 1 Dishwasher, Inlet pipe, Outlet pipe, User Manual |
8. Warranty and Support
Your Faber dishwasher comes with a comprehensive warranty and dedicated customer support.
- Manufacturer Warranty: 2 years comprehensive warranty on the product and 10 years on rust-through only.
- Customer Service: For any queries, service requests, or technical assistance, please contact Faber customer care.
- Manufacturer Contact: 1800-209-3484
Please retain your purchase receipt for warranty claims.
