YCCUZA 737269577652
Contents
YCCUZA Water Temperature Mixing Valve
User Instruction Manual
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YCCUZA Water Temperature Mixing Valve. This valve is designed to integrate with automatic sensor touchless faucets, allowing for temperature control of the water supply. Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
- Always turn off the main water supply before attempting any installation or maintenance.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any step, consult a qualified plumber.
- Do not use abrasive cleaners or tools that may damage the valve's finish.
Package Contents
Verify that all components are present before beginning installation:
- Water Temperature Mixing Valve
- Rubber Gaskets (3 pieces)
- Installation Illustration (refer to this manual)
Note: Mounting hardware and supply lines are not included.
Image: The YCCUZA Water Temperature Mixing Valve shown with three rubber gaskets, illustrating the complete package contents.
Setup and Installation
The YCCUZA Water Temperature Mixing Valve is designed for easy integration into existing plumbing systems for automatic sensor faucets. Follow these steps for proper installation:
- Turn Off Water Supply: Locate and turn off the main hot and cold water supply valves under your sink or at the main household shut-off.
- Identify Connections: The mixing valve has two inlet ports and one outlet port. The inlets are typically marked RED for hot water and BLUE for cold water. The outlet port connects to your faucet.
- Connect Hot Water: Attach the hot water supply line to the RED inlet port of the mixing valve. Ensure a rubber gasket is properly seated to prevent leaks. Tighten securely by hand, then use a wrench for a final quarter turn, being careful not to overtighten.
- Connect Cold Water: Attach the cold water supply line to the BLUE inlet port of the mixing valve. Ensure a rubber gasket is properly seated. Tighten securely.
- Connect to Faucet: Connect the outlet port of the mixing valve to the water inlet of your automatic sensor faucet. Ensure a rubber gasket is properly seated. Tighten securely.
- Check for Leaks: Slowly turn on the main hot and cold water supply valves. Inspect all connections for any signs of leaks. If leaks are detected, turn off the water supply and re-tighten the connections.
Image: A side view of the YCCUZA mixing valve, illustrating the 1/2" FIP/IPS threaded connections for hot, cold, and mixed water lines.
Image: An angled perspective of the YCCUZA mixing valve, highlighting its compact design and the distinct hot (red) and cold (blue) indicators on the control knob.
Operating Instructions
The YCCUZA Water Temperature Mixing Valve features a simple control knob for adjusting water temperature. The knob allows you to select between Cold, Open (mixed), Hot, or Off positions.
- Adjusting Temperature: Rotate the knob on the top of the valve to your desired setting.
- Cold: Turning the knob to the 'Cold' position will supply only cold water to the faucet.
- Hot: Turning the knob to the 'Hot' position will supply only hot water to the faucet.
- Open (Mixed): The 'Open' position allows both hot and cold water to mix, providing a tempered water output. The exact temperature will depend on the input temperatures of your hot and cold water lines and the specific setting of the control.
- Off: The 'Off' position will shut off the water flow through the valve.
Image: A top-down view of the YCCUZA mixing valve, clearly displaying the control knob with its red (hot) and blue (cold) indicators for easy temperature adjustment.
Maintenance
Regular maintenance ensures optimal performance and longevity of your mixing valve.
- Cleaning: Clean the exterior of the valve with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the chrome finish.
- Inspection: Periodically check all connections for any signs of leaks or corrosion. Address any issues promptly.
- Gaskets: If leaks occur, inspect the rubber gaskets. Replace them if they appear worn or damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leak at connections | Loose connections, damaged gaskets | Ensure connections are tight. Replace worn or damaged rubber gaskets. |
| No water flow | Water supply off, valve in 'Off' position, clogged lines | Check if main water supply is on. Rotate valve knob to 'Open', 'Hot', or 'Cold'. Inspect supply lines for blockages. |
| Incorrect water temperature | Valve knob setting, issues with hot/cold water supply | Adjust the valve knob. Verify hot and cold water supplies are functioning correctly and at appropriate temperatures. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 737269577652 |
| Material | Copper (Brass Construction) |
| Exterior Finish | Chrome |
| Inlet Connection Size | 0.5 Inches |
| Inlet Connection Type | Female Iron Pipe (FIP/IPS) |
| Outlet Connection Size | 0.5 Inches |
| Outlet Connection Type | Female Iron Pipe (FIP) |
| Number of Ports | 2 (Inlets) + 1 (Outlet) |
| Control | Cold, Open (Mixed), Hot, Off |
| Item Weight | 7 ounces |
| Package Dimensions | 3.07 x 2.8 x 2.32 inches |
| Installation Method | Automatic Faucet replacement |
| Special Features | Adjustable Hot Limit |
| Usage | Commercial/Residential |
| Certifications | UPC, FM, IAPMO, ASME B16.34, ANSI B16.11, ANSI B1.20.1, NSF, U.S. standard size |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact YCCUZA customer service directly. Keep your purchase receipt as proof of purchase.
You can visit the YCCUZA store for more information: YCCUZA Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.