Tilta Nucleus-Nano Run/Stop Cable for Sony a6/a7/a9 User Manual

Introduction

This manual provides instructions for the proper installation, operation, and maintenance of the Tilta Nucleus-Nano Run/Stop Cable (Model: RS-WLC-T04-SYA). This cable enables run/stop functionality between the Tilta Nucleus-Nano motor and compatible Sony a6, a7, and a9 series camera systems.

Tilta Nucleus-Nano Run/Stop Cable with micro-USB and 2.5mm TRS connectors

Figure 1: Tilta Nucleus-Nano Run/Stop Cable. This image displays the black cable with a micro-USB connector on one end and a 2.5mm TRS (Tip-Ring-Sleeve) connector on the other, designed for connecting the Nucleus-Nano motor to Sony cameras for remote run/stop control.

Setup

Identify Connectors: Locate the micro-USB connector and the 2.5mm TRS connector on the cable.
Connect to Nucleus-Nano Motor: Insert the micro-USB end of the cable into the designated run/stop port on your Tilta Nucleus-Nano motor. Ensure a secure connection.
Connect to Sony Camera: Insert the 2.5mm TRS end of the cable into the remote control port (typically labeled 'REMOTE' or 'MULTI') on your compatible Sony a6, a7, or a9 series camera. Refer to your camera's manual for the exact port location.
Power On: Ensure both the Nucleus-Nano motor and the Sony camera are powered on.

Operating Instructions

Once the cable is correctly connected and both devices are powered on, the Nucleus-Nano motor's run/stop button will control the recording function of the connected Sony camera.

Initiate Recording: Press the run/stop button on the Nucleus-Nano motor once to start recording on the Sony camera.
Stop Recording: Press the run/stop button on the Nucleus-Nano motor again to stop recording on the Sony camera.
Verify Functionality: Always verify that the camera's recording indicator light responds correctly to the run/stop commands from the Nucleus-Nano motor.

Maintenance

Cleaning: Use a soft, dry cloth to gently wipe the cable and connectors. Avoid using liquid cleaners or solvents.
Storage: Store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks in the cable.
Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.

Troubleshooting

Issue: Run/Stop function is not working.

Check Connections: Ensure both the micro-USB and 2.5mm TRS connectors are fully and securely inserted into their respective ports on the Nucleus-Nano motor and the Sony camera.
Power Status: Verify that both the Nucleus-Nano motor and the Sony camera are powered on and have sufficient battery life.
Camera Compatibility: Confirm that your Sony camera model is compatible with the Nucleus-Nano run/stop system and that the remote port is enabled in the camera settings, if applicable.
Cable Integrity: Inspect the cable for any visible damage. A damaged cable may prevent proper communication.
Motor Functionality: Test the Nucleus-Nano motor's run/stop button independently, if possible, to rule out issues with the motor itself.

Specifications

Feature	Detail
Model Number	RS-WLC-T04-SYA
Brand	Tilta
Compatibility	Tilta Nucleus-Nano Motor, Sony a6/a7/a9 series cameras
Connector Type 1	Micro-USB (for Nucleus-Nano motor)
Connector Type 2	2.5mm TRS (for Sony camera remote port)
Function	Run/Stop control
Cable Type	AUX
Special Feature	Tangle Free
Item Weight	3.2 ounces

Warranty Information

This product is covered by Tilta's standard limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Tilta website or contact their customer support. Proof of purchase may be required for warranty claims.

Customer Support

For further assistance, technical support, or inquiries regarding the Tilta Nucleus-Nano Run/Stop Cable, please visit the official Tilta website or contact their customer service department. Contact information can typically be found on the Tilta website's support section.

Online Resources: www.tilta.com

	Tilta Nucleus-Nano Wireless Lens Control WLC-T04 User Guide A comprehensive guide to setting up and using the Tilta Nucleus-Nano Single Channel Wireless Lens Control system (WLC-T04), including attaching the motor and handwheel, auto-calibration, and wireless control assignment.
	Tilta Nucleus-M II Wireless Lens Control System Quick Start Guide This guide provides essential information for setting up and using the Tilta Nucleus-M II Wireless Lens Control System. It covers installation, connection, maintenance, safety precautions, troubleshooting, and a detailed overview of the system's components and functions, including the FIZ Hand Unit, Motor, and Hand Grips. The document also lists the packing contents for various kits.
	TILTA Nucleus Nano II Power Handle User Manual and Specifications Comprehensive guide to the TILTA Nucleus Nano II Power Handle, covering its features, packing list, detailed specifications, and versatile power supply capabilities. Learn how to connect accessories, power your camera rig, and build monitoring systems.
	Tilta Nucleus-NII Wireless Lens Control System: User Manual Detailed user manual for the Tilta Nucleus-NII Wireless Lens Control System, covering hand unit and motor setup, operation, calibration, and advanced settings for professional filmmakers.
	Tilta Nucleus Nano II Control Handle WLC-T05-CH User Manual Comprehensive guide to the Tilta Nucleus Nano II Control Handle (WLC-T05-CH), detailing its features, specifications, and operation for professional camera control.
	Tilta Nucleus-N II Wireless Lens Control System User Manual User guide for the Tilta Nucleus-N II Wireless Lens Control System (WLC-T05), detailing hand unit and motor setup, operation, pairing, firmware updates, and safety precautions.

Tilta RS-WLC-T04-SYA