1. Introduction
This manual provides essential information for the proper use and maintenance of your VINABTY RM-C3090 remote control. This remote is designed to operate various Hitachi, JVC, and Finlux LED/LCD Smart TV models. Please read these instructions carefully before use.
2. Compatibility
The VINABTY RM-C3090 remote control is compatible with a range of Hitachi, JVC, and Finlux LED/LCD Smart TV models. Known compatible models include:
- Hitachi: 32HB1T06I, 32HB4C01H, 32HB4C01K, 32HB4T01A, 32HB4C01
- JVC: (Specific models may vary, refer to your TV's original remote model)
- Finlux: (Specific models may vary, refer to your TV's original remote model)
Important: Please verify that your television model is compatible with this remote control before use. If you are unsure, compare the buttons and layout with your original remote or consult your TV's user manual.
3. Setup
3.1 Battery Installation
This remote control requires two AAA alkaline batteries (not included). No programming or pairing is required; simply insert the batteries correctly, and the remote will be ready for use.
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover off.
- Insert two AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 1: Battery compartment with cover removed, showing battery orientation.
4. Operating Instructions
Once batteries are installed, point the remote control directly at your television's infrared receiver. Ensure there are no obstructions between the remote and the TV.
Figure 2: Front view of the VINABTY RM-C3090 remote control.
4.1 Key Functions
- Power Button (⏻): Turns the TV on or off.
- Number Buttons (0-9): Directly select TV channels.
- Volume Up/Down (V+/V-): Adjusts the sound volume.
- Channel Up/Down (P+/P-): Changes TV channels sequentially.
- Mute Button (🔇): Mutes or unmutes the TV sound.
- Menu Button: Accesses the TV's main menu.
- Navigation Buttons (Up, Down, Left, Right): Navigates through menus and options.
- OK Button: Confirms selections in menus.
- Exit Button: Exits the current menu or function.
- Back Button: Returns to the previous screen or menu.
- Source/Input Button: Selects input sources (HDMI, AV, etc.).
- Colored Buttons (Red, Green, Yellow, Blue): Used for specific functions within Smart TV applications or teletext, as indicated on screen.
- Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback.
5. Maintenance
5.1 Cleaning
To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.
5.2 Battery Replacement
Replace batteries when the remote control becomes unresponsive or its range decreases significantly. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
5.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
6. Troubleshooting
If you encounter issues with your remote control, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control is not working. | Dead or incorrectly inserted batteries. | Replace batteries with new AAA alkaline batteries, ensuring correct polarity. |
| Remote control has limited range or is unresponsive. | Weak batteries, obstruction, or remote not pointed at TV. | Replace batteries. Ensure a clear line of sight between the remote and the TV's IR receiver. Point the remote directly at the TV. |
| Certain buttons do not function. | Remote not fully compatible with specific TV functions, or button malfunction. | Verify TV model compatibility. If the issue persists, contact customer support. |
7. Specifications
- Brand: VINABTY
- Model Number: RM-C3090 (DDCR-RM-C3090-time)
- Connectivity Technology: Infrared (IR)
- Special Feature: Ergonomic design
- Compatible Devices: Television (Hitachi, JVC, Finlux LED/LCD Smart TVs)
- Maximum Supported Devices: 1
- Maximum Range: 10 Meters (approx. 33 feet)
- Battery Type: AAA Alkaline (2 required)
8. Warranty and Support
VINABTY provides after-sales service for its products. If you encounter any problems with your RM-C3090 remote control or require assistance, please do not hesitate to contact the seller or VINABTY customer support. Please have your purchase details and model number ready when contacting support.
