Product Overview
The PERLESMITH PSXLF03 is a full-motion TV wall mount designed for televisions ranging from 37 to 75 inches, supporting weights up to 110 lbs. It features an extra-long articulating arm that extends up to 27.36 inches from the wall, allowing for versatile viewing angles and corner installations. The mount offers swivel, tilt, and post-installation leveling capabilities to optimize your viewing experience.
This mount is compatible with various VESA patterns, including 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x300mm, 400x400mm, 500x400mm, and 600x400mm. It is designed for installation on 16-inch wood studs, concrete, or brick walls, providing a secure and stable mounting solution.
Figure 1: PERLESMITH PSXLF03 TV Wall Mount components.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 110 lbs (50 kg).
- TV Size: This mount is designed for TVs between 37 and 75 inches.
- Wall Type: Install only on 16-inch wood studs, solid concrete, or brick walls. Do not install on drywall alone.
- Professional Installation: If unsure about installation, consult a qualified professional.
- Hardware: Use only the provided mounting hardware. Ensure all bolts are securely tightened before mounting the TV.
Figure 2: TV compatibility and wall types.
Setup and Installation
Follow these steps carefully for a secure installation. It is recommended to have two people for installation, especially when handling the TV.
- Verify Wall Compatibility: Ensure your wall can support the weight of the mount and your TV. The mount is designed for 16-inch wood studs, concrete, or brick walls.
- Attach Brackets to TV: Secure the TV brackets to the back of your television using the appropriate screws and spacers from the provided hardware kit. Ensure the brackets are centered and level.
- Install Wall Plate:
- Locate the desired mounting position on your wall. Use a stud finder for wood studs.
- Use the provided drilling template to mark the pilot holes.
- Drill pilot holes according to the instructions for your wall type (wood stud, concrete, or brick).
- Secure the wall plate to the wall using the lag bolts and washers. Ensure it is firmly attached and level.
- Hang the TV: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount.
- Secure TV to Mount: Use the security locks or screws to firmly attach the TV brackets to the wall plate, preventing accidental dislodgement.
Figure 3: Pre-labeled hardware for easy installation.
Video 1: A demonstration showcasing the features and ease of use of the PSXLF03 TV wall mount, including its full range of motion and stability.
Operating the Mount
The PERLESMITH PSXLF03 mount offers flexible adjustments to achieve optimal viewing angles.
- Extension and Retraction: The articulating arm allows the TV to extend up to 27.36 inches from the wall and retract to a slim 3 inches when not in use. Gently push or pull the TV to adjust the distance.
- Swivel: Swivel the TV up to 90 degrees left or right when fully extended to direct the screen towards your desired viewing area.
- Tilt: Adjust the vertical viewing angle by tilting the TV 15 degrees forward (downward) or 5 degrees backward (upward) to reduce glare and improve visibility.
- Post-Installation Leveling: Fine-tune the TV's horizontal position by leveling it -3 degrees to +3 degrees after installation. This ensures a perfectly straight display.
Figure 4: Full swivel range of the mount.
Figure 5: Tilt, extension, and leveling adjustments.
Cable Management
The mount includes cable management straps to help organize and route your TV cables, maintaining a clean and tidy appearance. Secure cables along the articulating arms to prevent tangling or damage during adjustments.
Maintenance
To ensure the longevity and safe operation of your PERLESMITH PSXLF03 TV mount, follow these maintenance guidelines:
- Regular Checks: Periodically inspect all screws and connections to ensure they remain tight and secure.
- Cleaning: Wipe the mount with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents that could damage the finish.
- Lubrication: The articulating joints are designed for smooth operation. If any stiffness occurs over time, a small amount of silicone-based lubricant can be applied to the moving parts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Minor misalignment during installation. | Use the post-installation leveling feature to adjust the TV by -3° to +3°. |
| Mount feels loose or unstable. | Mounting screws are not fully tightened or incorrect wall anchors used. | Ensure all lag bolts securing the wall plate are tightened. Verify correct anchors were used for your wall type. Re-check TV attachment to brackets. |
| Difficulty moving the articulating arm. | Joints may be stiff or cables are obstructing movement. | Ensure cables are properly managed and not caught. Apply a small amount of silicone-based lubricant to the joints if necessary. |
| TV does not fit the mount. | Incorrect VESA pattern or TV size/weight. | Verify your TV's VESA pattern, size, and weight against the mount's specifications before purchase and installation. |
Specifications
- Model: PSXLF03
- Compatible TV Sizes: 37 - 75 inches
- Weight Capacity: Up to 110 lbs (50 kg)
- VESA Compatibility: 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x300mm, 400x400mm, 500x400mm, 600x400mm
- Extension from Wall: 3 inches (retracted) to 27.36 inches (extended)
- Tilt Angle: +5° (up) / -15° (down)
- Swivel Angle: ±90° (when fully extended)
- Post-Installation Leveling: ±3°
- Material: Alloy Steel
- Color: Black
- Wall Compatibility: 16-inch Wood Studs, Solid Concrete, Brick
Warranty and Support
PERLESMITH products are designed for durability and ease of use. For specific warranty information, please refer to the documentation included with your purchase or visit the official PERLESMITH website.
For technical assistance, installation questions, or any other inquiries, please contact PERLESMITH customer support. Contact details can typically be found on the product packaging or the official brand website.
You can also find additional resources, including a PDF user manual, at the following link: PERLESMITH PSXLF03 User Manual (PDF)
