Introduction
Thank you for choosing the Eastar 16-inch 5-Piece Kids Drum Kit, model EDS-350. This manual provides essential information for the proper assembly, operation, maintenance, and troubleshooting of your new drum set. Please read these instructions carefully before use to ensure optimal performance and longevity of the instrument.
Image: The complete Eastar 16-inch 5-Piece Kids Drum Kit in metallic blue, including bass drum, snare, tom-toms, cymbals, drum throne, bass pedal, and drumsticks.
Safety Information
- Ensure all components are securely fastened during assembly and before playing to prevent accidents.
- Keep small parts away from young children to avoid choking hazards.
- The drum throne has a maximum load capacity of 220 lbs (100 kg). Do not exceed this weight limit.
- Avoid inserting drumsticks or other objects into the drum skins with excessive force, as this can cause damage.
- Supervise young children during use to ensure safe and proper handling of the instrument.
Package Contents
Your Eastar EDS-350 drum kit includes the following components:
- 16-inch Bass Drum
- Snare Drum
- Mounted Tom-Toms (various sizes)
- Floor Tom Drum
- Straight Cymbal with Stand
- Hi-Hat Cymbal with Stand
- Bass Drum Pedal
- Adjustable Drum Throne
- Drumsticks (2 sets)
- Assembly Hardware and Drum Key
Setup and Assembly
Assembly of the Eastar EDS-350 drum kit requires careful attention to detail. Please follow these steps to ensure correct setup.
1. Bass Drum Assembly
Attach the drum heads to the bass drum. Ensure the heads are seated evenly before tightening the tension rods with the provided drum key. Tighten rods in a star pattern for even tension. Attach the bass drum legs and secure them. Install the bass drum pedal onto the bass drum hoop.
Image: Close-up of the electroplated bass drum pedal attached to the bass drum, showing its robust construction.
2. Tom-Tom Drums
Mount the tom-toms onto the bass drum using the zinc alloy suspension mounts. These mounts allow for angle adjustment to suit the player's preference. Attach the drum heads to the tom-toms, ensuring even tension for optimal sound.
Image: Illustration showing the adjustable angle of the tom-tom mount, highlighting its flexibility for player comfort.
3. Snare Drum
Place the snare drum on its stand. The snare features an adjustable sound belt (snare wires) which can be tightened or loosened to change the tone. Be careful not to overtighten counter-clockwise, as this may cause the snare wires to detach.
Image: Close-up of the snare drum's adjustable sound belt mechanism, showing the knob for tension adjustment.
4. Cymbals and Stands
Assemble the straight cymbal stand and hi-hat stand. Mount the cymbals securely, ensuring they are not overtightened, which can restrict their vibration. The hi-hat stand allows for height adjustment. Position the hi-hat pedal for comfortable operation.
5. Drum Throne
Assemble the adjustable drum throne. Ensure all legs are stable and the seat is securely attached. Adjust the height to a comfortable position for the player, allowing for proper posture and reach to all drums and cymbals.
Image: A matte drum skin and the adjustable drum throne, indicating the throne's maximum load capacity of 220 lbs (100 kg).
Operating Instructions
Tuning the Drums
Each drum head can be tuned to achieve different pitches and tones. Use the drum key to adjust the tension rods. For a balanced sound, tighten opposing rods incrementally until the desired pitch is reached. Experiment with different tensions to find the sound you prefer.
Playing Techniques
- Holding Drumsticks: Hold the drumsticks loosely but firmly, allowing for rebound and control.
- Striking Drums: Strike the center of the drum head for a full, resonant sound. Striking closer to the rim will produce a higher-pitched, shorter sustain.
- Cymbals: Strike cymbals with a glancing blow for a sustained sound. The hi-hat can be played open, closed, or foot-pedaled for various rhythmic effects.
- Bass Drum Pedal: Use the bass drum pedal to strike the bass drum. Practice consistent foot pressure for steady rhythms.
Maintenance and Care
- Cleaning: Wipe down drums and hardware with a soft, dry cloth after each use to remove dust and fingerprints. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying.
- Drum Heads: Drum heads are consumable parts and will wear out over time. Replace them when they show signs of significant wear, tearing, or loss of sound quality.
- Hardware: Periodically check all screws, bolts, and clamps for tightness. Loose hardware can affect sound and stability.
- Storage: Store the drum kit in a dry, temperature-stable environment away from direct sunlight or extreme humidity to prevent damage to the wood shells and metal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor drum sound / Buzzing | Uneven drum head tension; loose snare wires; loose hardware. | Adjust drum head tension evenly with drum key; tighten snare sound belt; check and tighten all hardware. |
| Bass drum pedal not functioning correctly | Loose springs or connections; worn beater. | Check and tighten all pedal components; replace beater if worn. |
| Cymbals sound choked or dull | Cymbals overtightened on stands. | Loosen wing nuts on cymbal stands slightly to allow cymbals to vibrate freely. |
| Drum kit feels unstable | Loose stand legs or connections. | Ensure all stand legs are fully extended and tightened; check all clamps and joints. |
Specifications
Image: A detailed diagram illustrating the dimensions and names of each component in the Eastar 5-piece drum kit.
- Model: EDS-350
- Drum Shell Material: Poplar Wood (7 Layers, 6.5mm thickness)
- Bass Drum: 16 inches x 11 inches
- Floor Tom Drum: 12 inches x 10 inches
- Mounted Tom-Toms: 10 inches x 5 inches, 8 inches x 6 inches
- Snare Drum: 10 inches x 6 inches
- Straight Cymbal: 12 inches (with stand)
- Hi-Hat Cymbal: 6 inches (with stand)
- Drum Throne Load Capacity: 220 lbs (100 kg)
- UPC: 708302982115
- Item Weight: 45.6 pounds
- Package Dimensions: 23.4 x 18.25 x 18 inches
Warranty and Support
Eastar provides a 1-Month Product Warranty for this drum set. For any questions, concerns, or technical support regarding your Eastar drum kit, please contact Eastar customer service. Refer to your purchase documentation for specific contact details or visit the official Eastar website.
We are committed to ensuring your satisfaction and providing assistance with your musical journey.
