Nania 795620

Download PDF
Contents

Nania BEFIX Child Booster Seat Instruction Manual

Model: 795620 | Group 2/3 (15-36kg)

1. Introduction

This manual provides essential information for the correct installation, use, and maintenance of your Nania BEFIX Child Booster Seat. Please read these instructions carefully before using the product and keep them for future reference. Incorrect installation or use can compromise the safety of your child.

The Nania BEFIX child booster seat is designed for children weighing between 15 and 36 kg (approximately 4 to 12 years old), corresponding to Group 2/3. It is approved according to European safety standard ECE R44/04 and has received a 4-star rating in ADAC tests, indicating good side impact protection.

2. Safety Information

  • Always ensure the child booster seat is installed correctly and securely in the vehicle.
  • The seat must only be installed in a forward-facing position on the rear seat of the vehicle.
  • The child must always be secured with the vehicle's 3-point seat belt. Ensure the belt is correctly routed through the designated guides.
  • Never leave a child unattended in the car seat.
  • Do not use the child booster seat if it has been involved in an accident, even if there is no visible damage. Internal damage may compromise its safety.
  • Regularly check all parts of the seat for wear or damage. Discontinue use if any damage is found.
  • Do not modify the child booster seat in any way. Use only original replacement parts if necessary.
  • Ensure the vehicle's seat belt is not twisted and lies flat across the child's body.

3. Product Overview

The Nania BEFIX child booster seat is designed for comfort and safety, featuring an adjustable headrest and a convenient cup holder.

3.1 Components

  • Booster base
  • Backrest with side impact protection
  • Adjustable headrest
  • Seat belt guides (red indicators)
  • Integrated cup holder
  • Removable and washable cover

3.2 Key Features

  • Group 2/3: Suitable for children from 15 to 36 kg.
  • Forward-Facing Installation: Installs exclusively facing forward.
  • Side Impact Protection: Designed to protect the child in case of a lateral collision.
  • Adjustable Headrest: The headrest can be adjusted to 4 positions to adapt to the child's height and morphology.
  • Integrated Cup Holder: Provides a practical solution for drinks during car journeys.
  • Removable and Washable Cover: For easy cleaning and hygiene.
  • Lightweight Design: Easy to transport between vehicles.
Nania BEFIX Child Booster Seat, front view
Figure 1: Front view of the Nania BEFIX child booster seat with cup holder.
Nania BEFIX Child Booster Seat, side view
Figure 2: Side view of the Nania BEFIX child booster seat, highlighting the backrest and headrest.
Technical drawing of Nania BEFIX dimensions
Figure 3: Technical drawing showing the dimensions of the BEFIX seat (Height: 660mm, Width: 430mm, Depth: 480mm).

4. Setup and Installation

The Nania BEFIX child booster seat is designed for easy installation using the vehicle's 3-point seat belt system.

  1. Placement: Place the child booster seat on the rear seat of your vehicle, ensuring it is positioned firmly against the vehicle's backrest. The seat must be installed in a forward-facing orientation only.
  2. Child Positioning: Seat your child in the booster seat. Ensure their back is flat against the backrest of the booster seat.
  3. Headrest Adjustment: Adjust the headrest height so that it is appropriate for your child's height. The headrest should be positioned such that the child's eyes are approximately level with the middle of the headrest, providing optimal head and neck support. The headrest is adjustable in 4 positions.
  4. Seat Belt Routing:
    • Pull the vehicle's 3-point seat belt over the child and the booster seat.
    • Route the lap portion of the seat belt under the armrests and through the red belt guides located on each side of the booster seat base. Ensure the lap belt lies low across the child's hips, not across the stomach.
    • Route the diagonal (shoulder) portion of the seat belt through the red belt guide located on the headrest. Ensure the shoulder belt rests centrally on the child's shoulder, not on their neck or off their shoulder.
    • Buckle the seat belt securely.
  5. Final Check: Tug on the seat belt to remove any slack. Ensure the booster seat is stable and the child is securely fastened. The seat belt should be snug but not uncomfortably tight.
Adjustable headrest of Nania BEFIX car seat
Figure 4: Illustration of the adjustable headrest, which can be set to 4 different positions.
Children in Nania BEFIX car seat showing proper belt routing
Figure 5: Example of children secured in the BEFIX seat, demonstrating correct forward-facing position and 3-point seat belt routing for the 15-36 kg weight range.

5. Operating Instructions

Once installed, operating the Nania BEFIX booster seat primarily involves securing your child correctly with the vehicle's seat belt for every journey.

  • Securing the Child: Always ensure the child is seated properly with their back against the booster seat's backrest. Fasten the vehicle's 3-point seat belt, making sure the lap belt passes through the red guides below the armrests and the shoulder belt passes through the red guide on the headrest.
  • Belt Tension: Pull the seat belt tight to remove any slack. The belt should be snug against the child's body without causing discomfort.
  • Headrest Adjustment: Re-adjust the headrest as your child grows to ensure the shoulder belt guide is always at the correct height, just above the child's shoulder.
  • Cup Holder Use: The integrated cup holder can be used for drinks or small items. Ensure any items placed in it are secure and do not pose a hazard during travel.

6. Maintenance

Proper maintenance ensures the longevity and hygiene of your Nania BEFIX child booster seat.

  • Cleaning the Cover: The fabric cover of the booster seat is removable and washable. It is recommended to hand wash the cover with mild soap and cold water. Do not machine wash, tumble dry, iron, or bleach the cover, as this may damage the fabric and its fire-retardant properties. Allow it to air dry completely before reattaching.
  • Cleaning the Plastic Parts: Wipe plastic parts with a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically inspect the seat for any signs of wear, tear, or damage to the fabric, plastic components, or belt guides. If any damage is found, contact customer support or discontinue use.

7. Troubleshooting

If you encounter any issues with your Nania BEFIX child booster seat, please refer to the following common solutions:

  • Seat Belt Not Securing Properly:
    • Ensure the vehicle's seat belt is not twisted.
    • Verify that both the lap and shoulder portions of the belt are correctly routed through the red guides on the booster seat.
    • Pull the belt firmly to remove all slack after buckling.
  • Headrest Difficult to Adjust:
    • Check for any obstructions or debris in the adjustment mechanism.
    • Ensure you are pressing the adjustment lever (if present) or following the specific adjustment instructions for your model.
  • Booster Seat Feels Loose:
    • Re-check the installation steps, ensuring the vehicle's seat belt is tightly secured around the child and the booster seat.
    • Ensure the booster seat is flush against the vehicle's backrest.

If problems persist, please contact Nania customer support.

8. Specifications

AttributeDetail
BrandNania
Model Number795620
Product TypeChild Booster Seat with Backrest
Weight GroupGroup 2/3 (15 - 36 kg)
Age Range (Approx.)4 to 12 years
Installation TypeVehicle's 3-point seat belt
OrientationForward-facing only
Safety StandardECE R44/04
ADAC Rating4 Stars
Dimensions (L x W x H)43 x 48 x 66 cm
Product Weight3.47 kg
Special FeaturesAdjustable headrest (4 positions), Side Impact Protection, Integrated Cup Holder, Removable and Washable Cover
ManufacturerTEAM TEX

9. Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Nania customer service or visit the official Nania website. Keep your proof of purchase for warranty claims.

Manufacturer: TEAM TEX

For further assistance, please refer to the contact information provided with your product packaging or on the manufacturer's official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.