Grundig GBT Band 5 Portable Bluetooth Speaker

Introduction

Thank you for choosing the Grundig GBT Band 5 Portable Bluetooth Speaker. This device combines a portable Bluetooth speaker with DAB+ and FM radio capabilities, designed for versatile audio entertainment. This manual provides essential information for safe and efficient use of your speaker.

Safety Information

Please read all safety instructions carefully before using the product. Keep this manual for future reference.

• Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping or subjecting the device to strong impacts.
• Do not disassemble or attempt to repair the device yourself. Refer all servicing to qualified personnel.
• Use only the provided USB-C cable for charging.
• Keep the device away from water and liquids, despite its waterproof rating, to prevent damage to internal components.
• Ensure proper ventilation when operating the device.

Package Contents

Verify that all items are present in the package:

• Grundig GBT Band 5 Portable Bluetooth Speaker
• USB-C Charging Cable
• Quick Start Guide (this manual)

Product Overview

Familiarize yourself with the speaker's components and controls.

Figure 1: Front view of the Grundig GBT Band 5 speaker, showcasing its mesh grille and side passive radiators.

Figure 2: Top panel with power button, mode selection, preset buttons (1-5), scan, info, play/pause, and volume controls, along with the LCD display.

Controls and Indicators:

• Power Button: Press and hold to turn the speaker on or off.
• Mode Button: Cycle through Bluetooth, DAB+, FM, and AUX input modes.
• Preset Buttons (1-5): Save and recall favorite radio stations.
• Scan/Info Button: Initiate station scan in radio modes; display information.
• Play/Pause Button: Control playback in Bluetooth mode.
• Volume Buttons (+/-): Adjust the audio volume.
• LCD Display: Shows current mode, station information, time, and battery status.
• USB-C Port: For charging the speaker.
• AUX Input: For connecting external audio devices via a 3.5mm cable (not included).
• Telescopic Antenna: For improved DAB+ and FM radio reception.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. The built-in lithium-ion battery provides up to 8 hours of playback on a full charge, with a charging time of approximately 3.5 hours.

1. Connect the supplied USB-C cable to the speaker's USB-C port.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer's USB port.
3. The charging indicator on the display will show the charging status. It will turn off or change color when fully charged.

Figure 3: The speaker can also function as a power bank to charge other devices via its USB port.

2. Power On/Off

• To turn on: Press and hold the Power button until the display illuminates.
• To turn off: Press and hold the Power button until the display turns off.

Operating Instructions

1. Bluetooth Mode

1. Turn on the speaker. Press the Mode button until "Bluetooth" appears on the display. The speaker will enter pairing mode, indicated by a flashing Bluetooth icon.
2. On your smartphone or other Bluetooth device, enable Bluetooth and search for available devices.
3. Select "Grundig GBT Band 5" from the list. Once paired, the Bluetooth icon on the speaker's display will stop flashing.
4. You can now play audio from your device through the speaker. Use the Play/Pause and Volume buttons on the speaker or your connected device to control playback.

The speaker maintains a Bluetooth range of up to 30 meters in open environments.

2. DAB+ Radio Mode

1. Extend the telescopic antenna for optimal reception.
2. Press the Mode button until "DAB+" appears on the display.
3. The speaker will automatically scan for available DAB+ stations. If it's the first time, a full scan will be performed.
4. Use the Previous/Next buttons to navigate through the available stations.
5. To save a station as a preset: Tune to the desired station, then press and hold one of the Preset (1-5) buttons until the display confirms it's saved. To recall a preset, simply press the corresponding preset button.

Figure 4: Extend the antenna for clear radio reception.

3. FM Radio Mode

1. Extend the telescopic antenna.
2. Press the Mode button until "FM" appears on the display.
3. Press the Scan button to automatically search for and save available FM stations.
4. Alternatively, use the Previous/Next buttons to manually tune to frequencies.
5. Saving and recalling presets works the same as in DAB+ mode.

4. Auxiliary Input (AUX)

1. Connect a 3.5mm audio cable (not included) from your external audio device's headphone jack to the speaker's AUX input port.
2. Press the Mode button until "AUX" appears on the display.
3. Play audio from your external device. Volume can be controlled via the speaker or the connected device.

5. Display Brightness

The LCD display features adjustable brightness. Refer to the quick start guide for specific button combinations to adjust brightness, typically involving a short press of the Info or Mode button while in standby or operation.

Maintenance

Cleaning

• Always turn off the speaker and disconnect it from the power source before cleaning.
• Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners, alcohol, or solvents.
• Ensure no moisture enters the ports.

Storage

• Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

Troubleshooting

Specifications

Figure 5: Physical dimensions of the Grundig GBT Band 5 speaker.

Warranty and Support

Grundig products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Grundig website. Keep your proof of purchase for warranty claims.

For further assistance, please contact Grundig customer service.