Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your BDI Furniture Sequel 20 6101-66'' Office Desk. Please read all instructions carefully before beginning assembly or use to ensure proper function and safety.
Product Overview
The BDI Furniture Sequel 20 6101-66'' Office Desk is a modern office desk designed for home or office environments. It features a satin-etched tempered glass top, wire management solutions, and a keyboard drawer. This desk is part of the Sequel 20 Office Collection, offering a sophisticated and functional workspace.
Product Demonstration Video
Video 1: An overview of the BDI Sequel Office system, demonstrating various configurations and features of the desk and complementary pieces.
Setup and Assembly
Assembly is required for this product. It is recommended that two people perform the assembly to ensure safety and ease of construction. Ensure all parts are present and undamaged before starting.
Unpacking and Inspection
Carefully unpack all components from the packaging. Inspect each part for any signs of damage or missing pieces. Refer to the packing list provided with your desk. In case of damaged or missing parts, contact BDI Furniture customer support immediately. Retain all packaging materials until assembly is complete.
Assembly Steps
- Attach Legs to Desktop: Carefully place the desktop upside down on a soft, clean surface to prevent scratches. Align the metal leg frames with the pre-drilled holes on the underside of the desktop. Secure using the provided screws and tools.
- Install Back Panel: Position the back panel between the leg frames. This panel is crucial for structural integrity and conceals wire management. Secure it firmly with the designated fasteners.
- Insert Keyboard Drawer: Slide the keyboard drawer assembly into its designated slot beneath the desktop. Ensure it glides smoothly on its tracks.
- Place Wire Management Ledge: Install the wire management ledge within the designated area, typically behind the back panel. This ledge is designed to hold power strips and excess cables.
- Adjust Levelers: Once the desk is upright, use the adjustable levelers on the bottom of the legs to ensure the desk is stable and level on uneven surfaces. Rotate them clockwise to raise and counter-clockwise to lower.
Important Safety Note: Always assemble the desk according to the provided instructions. Ensure all parts are securely fastened before use. This desk is designed to hold up to 150 lbs (68 kg) evenly distributed. For optimal stability, we recommend anchoring the desk to the wall, especially in areas with high foot traffic or where children may be present.
Operating Instructions
The BDI Furniture Sequel 20 desk is designed with user convenience and organization in mind. Familiarize yourself with its key operational features.
Keyboard Drawer Usage
The generously-sized keyboard drawer is located beneath the desktop and includes space for a keyboard and mouse. It features a flip-down front that seamlessly blends into the desktop when not in use, maintaining a clean look. The drawer is lined with nonslip material to keep your peripherals securely in place during use.
Note: The keyboard tray does not feature a locking mechanism in the open position and may move or glide during typing. Users may need to adjust their typing style or consider alternative keyboard placement if this is a significant concern.
Wire Management System
The desk incorporates integrated wire management channels and a dedicated wire management ledge. These features are designed to help you organize and conceal power cords, data cables, and other wiring, contributing to a tidy and professional workspace. Route cables through the channels to keep them out of sight and prevent tangles.
Power Management
The wire management ledge is specifically designed to accommodate a standard power strip. This allows for convenient power access for all your electronic devices directly at your workstation, while keeping the power strip and its associated cables neatly out of view.
Maintenance and Care
Proper care and maintenance will ensure the longevity and continued aesthetic appeal of your BDI Furniture Sequel 20 desk.
- Cleaning: For the satin-etched tempered glass top, use a soft, damp cloth with a mild glass cleaner if necessary. For wood surfaces, wipe with a clean, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
- Spills: Promptly wipe up any spills on both glass and wood surfaces to prevent staining or damage.
- Weight Capacity: The desk is designed to support up to 150 lbs (68 kg) when weight is evenly distributed across the surface. Do not exceed this weight limit to prevent structural damage.
- Stability: Periodically check all assembly fasteners (screws, bolts) to ensure they remain tight. Loose fasteners can lead to instability. If the desk is placed on an uneven floor, adjust the integrated levelers on the bottom of the legs.
- Environmental Conditions: Avoid placing the desk in direct sunlight for prolonged periods or near heat sources (e.g., radiators, heating vents), as extreme temperature and humidity changes can affect the wood and glass materials.
- Anchoring: For enhanced stability and safety, particularly in households with children or in high-traffic areas, consider anchoring the desk to a wall using appropriate hardware (not included).
Troubleshooting
This section addresses common issues you might encounter with your BDI Furniture Sequel 20 Office Desk and provides potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk is wobbly or uneven. | Uneven floor surface; loose assembly fasteners. | Adjust the levelers on the bottom of each leg until the desk is stable. Tighten all assembly screws and bolts securely. |
| Keyboard drawer does not glide smoothly. | Obstruction in the drawer slides; misaligned installation of the drawer. | Check for any debris (dust, small objects) in the drawer slides. If necessary, remove the drawer and re-install it, ensuring proper alignment with the tracks. |
| Keyboard drawer moves during typing. | This is a characteristic of the drawer's design. | The keyboard drawer is designed for easy access and does not feature a locking mechanism in the open position. This movement is normal. Users may need to adjust their typing style or consider placing the keyboard directly on the desktop if this is a significant issue. |
| Cables are not neatly organized or visible. | Wire management features are not fully utilized. | Utilize the integrated wire management channels and the wire management ledge to route and conceal all power and data cables effectively. Ensure power strips are placed on the designated ledge. |
Specifications
Detailed specifications for the BDI Furniture Sequel 20 6101-66'' Office Desk:
- Brand: BDI Furniture
- Model Name: Sequel 20
- Model Number: 6101 CRL/B
- UPC: 705176610113
- Product Dimensions (D x W x H): 24"D x 66"W x 29"H (61 cm x 168 cm x 74 cm)
- Color: Charcoal Stained Ash Wood Finish - Black Metal Finish
- Style: Modern
- Base Material: Metal
- Finish Type: Steel, Wood
- Top Material Type: Satin-Etched Tempered Glass
- Special Features: Keyboard Drawer, Wire Management Channels, Wire Management Ledge, Nonslip Drawer Liner, Adjustable Levelers, Finished Back Panel
- Room Type: Office
- Recommended Uses For Product: Office, Working
- Required Assembly: Yes
- Recommended Number of People for Assembly: 2
- Maximum Weight Capacity: 150 lbs (68 kg) evenly distributed
- Drawer Glide Material: Plastic/Nylon
- Drawer Glide Mechanism: Standard Glide
- Number of Drawers: 1 (Keyboard Drawer)
Warranty and Support
Your BDI Furniture Sequel 20 desk is backed by a manufacturer's warranty to ensure your satisfaction and product longevity.
- Residential Warranty: 3 Years
- Commercial Warranty: 1 Year
For warranty claims, technical assistance, or to inquire about replacement parts, please contact BDI Furniture customer support directly. You can find comprehensive support resources and contact details on the official BDI Furniture website. Please have your product's model number (6101 CRL/B) and proof of purchase readily available when contacting support.
For more information, visit the official BDI Furniture Store: BDI Furniture Store on Amazon