Introduction
Thank you for choosing Heyday True Wireless in-Ear Headphones. This manual provides essential information to help you set up, operate, and maintain your new headphones. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Package Contents
- Heyday True Wireless in-Ear Headphones (Deep Green)
- Charging Station (Case)
- USB Cable (for charging)
- 3 Ear Adapters (S/M/L)
Product Overview

Image: The Heyday True Wireless in-Ear Headphones in deep green, shown with one earbud placed in the open charging case and the other earbud standing upright next to it. The charging case is also deep green and features four small indicator lights on the front edge, indicating battery status.
The Heyday True Wireless in-Ear Headphones are designed for comfort and convenience, featuring a lightweight, water-resistant design and a built-in microphone for calls. The included charging case provides extended battery life on the go.
Setup
1. Charging the Headphones and Case
- Place both earbuds into the charging case. Ensure they are correctly seated in their respective slots.
- Connect the USB-C cable to the charging port on the back of the charging case and the other end to a USB power source (e.g., wall adapter, computer USB port).
- The indicator lights on the charging case will illuminate to show the charging status. A full charge typically takes approximately 1 hour.
- Once fully charged, disconnect the USB-C cable. The case holds multiple charges for the earbuds.
2. Pairing with a Bluetooth Device
- Ensure the headphones are charged.
- Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light on the earbuds.
- On your device (smartphone, tablet, etc.), go to the Bluetooth settings and turn Bluetooth on.
- Search for available devices. Select "Heyday Headphones" (or similar name) from the list.
- Once connected, the indicator light on the earbuds will stop flashing, and your device will confirm the connection.
- The headphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
3. Fitting the Earbuds
- Select the ear adapter size (S, M, L) that provides the most comfortable and secure fit for your ears. A good seal is crucial for optimal sound quality and noise isolation.
- Gently insert each earbud into your ear canal.
- Twist slightly to ensure a snug and stable fit.
Operating Instructions
Touch Controls
The Heyday True Wireless in-Ear Headphones feature touch-sensitive controls on each earbud. The specific functions may vary slightly based on the earbud (left/right) and the number of taps.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call or active call.
- Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
- Activate Voice Assistant: Triple tap on either earbud.
Calling
When a call comes in, the music will pause. Tap either earbud once to answer the call. Tap once again to end the call. To reject an incoming call, press and hold either earbud for approximately 2 seconds.
Music Playback
After pairing, open your music application on your device and begin playback. Use the touch controls on the earbuds to manage your audio experience.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, solvents, or aerosol sprays.
- Gently remove any earwax or debris from the ear tips and speaker mesh using a small, soft brush or cotton swab.
Storage
- Always store the earbuds in their charging case when not in use to protect them and keep them charged.
- Store the device in a cool, dry place, away from extreme temperatures and direct sunlight.
Troubleshooting
Headphones not pairing/connecting:
- Ensure both earbuds are charged.
- Turn off Bluetooth on your device, then turn it back on.
- Forget/delete the headphones from your device's Bluetooth list and attempt to pair again.
- Place earbuds back in the case, close the lid, wait a few seconds, then open the lid to re-initiate pairing mode.
No sound or low volume:
- Check the volume levels on both your device and the headphones.
- Ensure the earbuds are properly seated in your ears and that the ear tips provide a good seal.
- Clean any debris from the earbud speaker mesh.
Charging issues:
- Ensure the USB-C cable is securely connected to both the case and the power source.
- Try a different USB-C cable or power adapter.
- Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
Specifications
| Feature | Specification |
|---|---|
| Model Number | 008-07-1801 |
| Connectivity Technology | Wireless (Bluetooth 4.2) |
| Maximum Operating Range | 33 feet (10 meters) |
| Battery Charge Life | Up to 24 Hours (with charging case) |
| Estimated Charge Time | 1 Hour |
| Ear Cushion Material | Silicon |
| Weight | 1.34 ounces (earbuds) / 7.1 ounces (item weight) |
| Water Resistance Level | Water Resistant |
| Control Method | Touch |
| Included Components | USB Cable, Charging Station, Earpiece, 3 Ear Adapters (S/M/L) |
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Heyday website. Keep your proof of purchase for any warranty claims.