Introduction
The Flemoon Outdoor Extension Cord Safety Cover is designed to provide a secure and weatherproof enclosure for electrical connections in outdoor and indoor environments. This product helps protect your electrical connections from rain, snow, dust, and dirt, ensuring safety and reliability for various applications.
Key Features:
- Safety Certifications: Conforms to UL50, UL50E, and CSA C22.2 No. 94.1/94.2 Standards.
- Waterproof Rating: IPX4 rated for protection against splashing water from any direction.
- Durable Construction: Made with heavy-duty reinforced PP material to withstand harsh weather conditions.
- Secure Closure: Features 4 corner clips, a snap-lock lid, and rubber gaskets for a tight seal.
- Versatile Use: Ideal for lawn and garden power tools, holiday lighting, pool pumps, fountains, and more.
Image: The Flemoon safety cover highlighting its ETL listing and weather-resistant properties against sun, snow, water, and dust.
Setup and Installation
- Turn off Power: Always ensure the power switch to the electrical connection is turned off before handling the cover.
- Open the Cover: Release the four corner clips and open the cover.
- Place Connections: Insert the electrical connection (e.g., extension cord plugs) properly into the designated space within the cover. Ensure the connection is centered.
- Secure Cords: Clip the cords into the internal clamps on both ends of the cover. This helps hold the cords in place and prevents strain on the connection.
- Check Rubber Gaskets: Verify that the cords are tightly wrapped by the rubber gaskets at the entry ports. This is crucial for maintaining the waterproof seal. Note: To avoid breaking the seal, do not place more than one cable in each port.
- Close the Cover: Snap the lid shut, ensuring all four corner clips are securely fastened.
- Positioning: Place the cover horizontally on a flat surface or hang it using the side mounting holes and included cable ties. Do not place vertically or obliquely. Do not submerge the cover in water. Do not bury the cover.
Image: The Flemoon extension cord safety cover shown open with an electrical connection placed inside, illustrating how cords are secured.
Video: A quick view demonstrating how to use and set up the Flemoon outdoor extension cord covers.
Operating Instructions
Once the electrical connection is securely enclosed within the Flemoon safety cover, you can safely use your outdoor electrical devices. The cover provides continuous protection against environmental elements.
- Ensure the cover remains closed and all clips are engaged during operation.
- Regularly check the cover for any signs of damage or dislodgement, especially after severe weather.
- The cover is designed for outdoor and indoor use, protecting connections for items such as holiday lights, garden tools, and pool equipment.
Image: The Flemoon safety cover in use, protecting an electrical connection for outdoor Christmas decorations in a winter setting.
Maintenance
To ensure the longevity and effectiveness of your Flemoon Outdoor Extension Cord Safety Cover, follow these maintenance guidelines:
- Regular Inspection: Periodically inspect the cover for any cracks, damage, or wear to the clips and rubber gaskets. Replace if damage is observed.
- Cleaning: Clean the exterior of the cover with a damp cloth to remove dirt or debris. Avoid using harsh chemicals that may degrade the material.
- Storage: When not in use, especially during off-seasons, store the cover indoors in a cool, dry place to prolong its lifespan.
Image: Flemoon safety covers of various colors stored neatly on a shelf, illustrating proper indoor storage when not in use.
Troubleshooting
If you encounter issues with your Flemoon Outdoor Extension Cord Safety Cover, consider the following:
- Water Inside Cover:
- Ensure all four corner clips are fully engaged and the lid is securely snapped shut.
- Check that the rubber gaskets at the cable entry points are tightly sealing around the cords.
- Verify that only one cable is placed per port to maintain the seal.
- Confirm the cover is placed horizontally and not submerged in water or buried.
- Inspect the cover for any cracks or damage that might compromise the seal.
- Cords Not Fitting:
- The cover is designed for 14/16/18 gauge cords, braided cables, and flat wires with a diameter of up to 10mm.
- Note: This extension cord box cannot fit power strips, right-angle plugs, or large adapters.
Specifications
| Brand | Flemoon |
| Model Number | 737269852063 |
| Material | Reinforced Polypropylene (PP) |
| Color | Black |
| External Dimensions | 2.3"D x 7.1"W x 2.3"H |
| Inner Dimensions | 2.0" x 2.0" x 5.3" |
| Entry Port Diameter | 10mm (suitable for 14/16/18 gauge cord, braided cable, flat wire) |
| Waterproof Rating | IPX4 |
| Certifications | UL50, UL50E, CSA C22.2 No. 94.1/94.2 Standards |
| Item Weight | 3.2 Ounces |
Image: Detailed product size diagram for the Flemoon Outdoor Extension Cord Safety Cover.
Warranty Information
For specific warranty details regarding your Flemoon Outdoor Extension Cord Safety Cover, please refer to the product packaging or contact Flemoon customer support directly. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with setup, or need troubleshooting help, please contact Flemoon customer support through their official website or the contact information provided on the product packaging. You can also visit the Flemoon Store on Amazon for additional resources.
