Wapaneus HLB-LT-FF Heated Electric Blanket User Manual

1. Important Safety Instructions

Please read all instructions carefully before using your Wapaneus Heated Electric Blanket. Failure to follow these instructions may result in electric shock, fire, or injury.

• Do Not Stack: Never stack electric blankets or other heating devices on top of this blanket while in use. This can lead to overheating and potential hazards.
• Avoid Covering Controller: Do not cover the thermostat or control unit with the blanket or any other material during operation. Ensure adequate ventilation around the controller.
• Unplug When Not in Use: Always turn off the power and unplug the blanket from the electrical outlet when leaving the room or when not in active use.
• ETL Certified: This heated blanket is ETL certified, ensuring it meets high safety and performance standards. It includes overheat protection and short-circuit protection for your peace of mind.
• Water Temperature: When washing, ensure water temperature is below 30℃/86℉.

2. Package Contents

Verify that all items are present in the package:

• Wapaneus Heated Electric Blanket (Full Size, 72" x 84")
• Digital Controller with Power Cord
• User Manual

3. Product Overview

The Wapaneus HLB-LT-FF Heated Electric Blanket is designed for comfort and warmth. It features a double-sided construction with 220GSM skin-friendly flannel on both sides. The blanket offers 10 heating levels and a 12-hour timer setting, along with a fast-heating function. Safety features include ETL certification, overheat protection, and short-circuit protection.

4. Setup

1. Unpack: Carefully remove the heated blanket and its components from the packaging.
2. Placement: Lay the blanket flat on your bed or desired surface. Ensure it is not folded, bunched, or creased, as this can cause localized overheating.
3. Connect Controller: Locate the connection port on the blanket and firmly plug in the digital controller's connector.
4. Power Connection: Plug the power cord from the controller into a standard 120V AC electrical outlet. Ensure the cord is not pinched or placed under heavy objects. The power cord is approximately 15 feet long to allow for flexible placement.

5. Operating Instructions

The digital controller allows for easy adjustment of heat and timer settings.

• Power On/Off: Press the 'ON/OFF' button to turn the blanket on or off. The digital display will illuminate when on.
• Adjust Heat Level: Use the '+' and '-' buttons to cycle through the 10 available heat settings. The current heat level will be displayed.
• Set Timer: Press the 'TIME' button to activate the timer function. Use the '+' and '-' buttons to select a duration from 1 to 12 hours. The blanket will automatically shut off after the set time.
• Preheat Function: If your controller includes a 'Preheat' button, press it to quickly warm the blanket to a comfortable temperature before settling in.

6. Maintenance and Cleaning

Proper care ensures the longevity and performance of your heated blanket.

1. Disconnect: Always disconnect the controller and power cord from the blanket before cleaning.
2. Machine Wash: The blanket is machine washable. Use a gentle cycle with cold water (below 30℃/86℉). Do not bleach or iron.
3. Hand Wash: Alternatively, the blanket can be hand washed in water below 30℃/86℉.
4. Drying Instructions:
   • Preheat the dryer on the "low" temperature setting for 2 minutes.
   • Place the blanket into the dryer and tumble dry for 10 minutes at a low temperature.
   • Remove the blanket while it is still damp and gently stretch it to its original size.
   • Drape the heated product over a clothesline or a shower rod. DO NOT use clothespins.
   • The heated product must be COMPLETELY dry before reconnecting the power plug or control plug.

7. Troubleshooting

If you experience issues with your heated blanket, refer to the following common solutions:

• Blanket Not Heating: Ensure the power cord is securely plugged into both the blanket and the wall outlet. Check if the outlet is functional.
• Uneven Heating: Ensure the blanket is laid flat and not bunched or folded. Uneven distribution can affect heat.
• Controller Display Not Working: Unplug the blanket for a few minutes, then plug it back in. If the issue persists, contact customer support.
• Automatic Shut-off: The blanket has a built-in timer (1-12 hours) and overheat protection. If it shuts off unexpectedly, check the timer setting or allow it to cool down before restarting.

For any persistent issues, please refer to the Warranty and Support section.

8. Specifications

9. Warranty and Support

Wapaneus is committed to providing quality products. While a specific warranty period is not detailed, if you encounter any quality-related issues with your heated blanket, please contact our customer support team immediately. We aim to provide a satisfactory solution within 24 hours.

For further assistance or inquiries, please refer to the contact information provided with your purchase or visit the official Wapaneus website.