MCombo Swivel Recliner with Ottoman Chair (Model 6151-9096) User Manual

Safety Information

Please read all safety instructions carefully before assembling and using the MCombo Swivel Recliner with Ottoman Chair. Retain this manual for future reference.

• Ensure user weight does not exceed 330 pounds. Exceeding this limit may cause damage to the chair or personal injury.
• Use caution when reclining to avoid tipping. Ensure the chair is on a stable, level surface.
• Keep children and pets away from the chair during assembly and operation to prevent accidents.
• Do not stand on the chair or ottoman.
• Avoid placing hot items directly on the faux leather upholstery.
• Regularly inspect all bolts and connections to ensure they remain tight.

Setup and Assembly

The MCombo Swivel Recliner with Ottoman Chair is designed for straightforward assembly. The product typically arrives in two boxes. Please ensure all components are present before beginning assembly.

Unpacking

• Carefully open both boxes and remove all packaging materials.
• Lay out all components on a clean, soft surface to prevent scratching.

Component Identification

Refer to the included parts list in your package to identify all chair and ottoman components, including the main chair body, armrests, base, ottoman, and hardware kit.

Image: Detailed dimensions of the MCombo Swivel Recliner and Ottoman, including overall height, width, depth, seat height, seat depth, and recommended user height (5'-6').

Assembly Steps

1. Attach the armrests to the main chair body. Align the holes and secure them using the provided bolts and hex wrench. Ensure all connections are firm.
2. Connect the chair back to the seat base. This may require two people for easier alignment.
3. Assemble the ottoman by attaching its base to the cushion.
4. Once assembled, ensure all screws and bolts are tightened securely. Do not overtighten.

For a visual guide on armrest installation, please refer to the video below:

Image: The fully assembled MCombo Swivel Recliner with Ottoman Chair in black faux leather, positioned in a living room setting.

Operating Instructions

Familiarize yourself with the chair's functions for optimal comfort and use.

Reclining Function

• To recline, locate the side handle on the right side of the chair.
• Pull the handle to release the backrest lock. Lean back to adjust the recline angle between 110 to 140 degrees.
• Release the handle to lock the backrest in your desired position.

Image: A side view of the MCombo Swivel Recliner illustrating the adjustable backrest angles, ranging from 110° (working) to 140° (napping time).

Vibration Massage

• Connect the power cord for the massage function to a suitable power outlet.
• Use the remote control to activate and customize the massage settings.
• The chair features 6 vibration points, 5 intensity levels, and 9 massage modes.
• A timer function is available to set the duration of your massage session.

Image: The remote control for the vibration massage function, detailing options for intensity, mode, and timer, alongside an illustration of the 6 vibrating points on the recliner.

360-Degree Swivel

• The chair is equipped with a sturdy wooden base that allows for smooth 360-degree rotation.
• Simply rotate the chair to face any direction without needing to move the entire unit.

Image: A close-up view of the MCombo Swivel Recliner's circular wooden base, indicating its 360-degree swivel capability with directional arrows.

Ottoman Use

The accompanying ottoman provides full leg support. Position it comfortably in front of the recliner for enhanced relaxation while reading or watching television.

Maintenance and Care

Proper care will extend the life and appearance of your MCombo Swivel Recliner.

Cleaning

• For general cleaning, wipe the faux leather upholstery with a clean, damp cloth.
• Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the material.
• For spills, blot immediately with a clean, dry cloth.

General Care

• Keep the chair away from direct sunlight and heat sources to prevent fading and material degradation.
• Periodically check and tighten all hardware connections to ensure stability.
• Avoid sharp objects that could puncture or scratch the faux leather.

Troubleshooting

If you encounter any issues with your MCombo Swivel Recliner, refer to the following common problems and solutions:

• Missing Parts: If any parts are missing upon delivery, contact MCombo customer support immediately with your purchase details.
• Vibration Massage Not Working:
  • Ensure the power cord is securely plugged into both the chair and a working electrical outlet.
  • Check the remote control for proper battery installation (if applicable) and functionality.
  • Verify that all connections between the chair and the massage unit are secure.
• Reclining Mechanism Stiff or Not Engaging:
  • Ensure the side handle is fully pulled to release the lock.
  • Check for any obstructions around the reclining mechanism.
  • Inspect the bolts connecting the backrest to the base; they may need tightening or adjustment.
• Chair Wobbles or Feels Unstable:
  • Verify that all assembly bolts are securely tightened.
  • Ensure the chair is placed on a flat, even surface.

If these steps do not resolve the issue, please contact MCombo customer support for further assistance.

Product Specifications

Warranty and Support

MCombo is committed to providing quality products and customer satisfaction.

Returns

This product is eligible for 30-day easy returns. Please refer to your purchase documentation or the retailer's return policy for specific terms and conditions.

Customer Support

For any questions, concerns, or assistance with your MCombo Swivel Recliner, please contact MCombo customer support. Contact information can typically be found on the MCombo website or through your purchase platform.