FLEXISPOT Electric Standing Desk Converter EM7 36-inch User Manual

Introduction

This manual provides comprehensive instructions for the safe and efficient use of your FLEXISPOT Electric Standing Desk Converter, Model EM7. Designed to transform your existing desk into an active workstation, this motorized riser offers seamless height adjustment for improved ergonomics. Please read this manual thoroughly before assembly and operation to ensure proper function and longevity of your product.

Safety Information

Adhering to these safety guidelines will help prevent injury and damage to the product.

• Ensure all components are securely fastened before and during use.
• Do not exceed the maximum load capacity of 44 lbs (20 kg) for the desktop and 11 lbs (5 kg) for the keyboard tray. Overloading can cause instability and damage.
• Keep hands, clothing, and other objects clear of moving parts during height adjustment to prevent pinching or entanglement.
• Use only the power adapter supplied with the product. Using an incorrect adapter may cause electrical hazards or damage.
• Do not allow children or individuals with reduced physical, sensory, or mental capabilities to operate the desk converter unsupervised.
• Disconnect the power cord from the electrical outlet before cleaning, maintenance, or if the unit will be unused for an extended period.
• Avoid placing liquids directly on the desk converter to prevent electrical short circuits.

Package Contents

Please verify that all the following parts are present in the packaging before beginning assembly:

• FLEXISPOT Electric Standing Desk Converter Main Unit
• Keyboard Tray
• Power Cord
• Cable Management Accessories
• User Manual (this document)

Setup and Assembly

The FLEXISPOT EM7 is designed for quick and easy assembly, requiring minimal effort.

1. Step 1: Attach the Keyboard Tray. Locate the two designated slots on the underside of the main desk converter unit. Align the keyboard tray's brackets with these slots and slide them in firmly until they click securely into place. Ensure the locking levers are engaged to prevent movement.
2. Step 2: Position the Converter. Carefully place the assembled desk converter on a stable, flat desk surface. Ensure it is centered and has adequate clearance for operation.
3. Step 3: Connect Power. Plug the provided power cord into the power input port on the converter, then connect the other end to a standard electrical outlet.
4. Step 4: Cable Management. Utilize the included cable management accessories to organize your monitor, laptop, and power cables. This helps maintain a tidy workspace and prevents cables from interfering with the converter's movement.

This image illustrates the two primary assembly steps: connecting the keyboard tray to the desktop plate and then placing the unit on your existing desk.

Operating Instructions

The FLEXISPOT EM7 features an electric lift system for smooth and effortless height adjustments.

1. Adjusting Height: To change the height of the desk converter, use the control panel located on the side of the desktop. Press and hold the "Up" arrow button to raise the desk converter to your desired standing height. Press and hold the "Down" arrow button to lower it to your preferred sitting height. The motor provides a smooth, quiet transition throughout the entire range.
2. Optimal Ergonomics: Experiment with different heights to find your most comfortable sitting and standing positions. The height adjustment range is from 5.7 inches (minimum) to 19.7 inches (maximum), allowing for a personalized ergonomic setup.

A close-up view of the electric control panel, showing the up and down arrow buttons used for adjusting the desk converter's height.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your desk converter.

• Cleaning: Wipe all surfaces with a soft, slightly damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
• Inspection: Periodically check all screws, bolts, and connections to ensure they remain tight. Retighten any loose fasteners as needed.
• Motor Care: The electric motor is designed for durability and quiet operation. To ensure its longevity, avoid overloading the desk converter beyond its specified weight capacity. Do not attempt to disassemble the motor unit.
• Cable Management: Regularly check that all cables are properly managed and not pinched or tangled, especially during height adjustments.

Troubleshooting

If you encounter any issues, refer to the following table for common problems and solutions.

Specifications

Detailed technical specifications for the FLEXISPOT Electric Standing Desk Converter EM7.

An illustration detailing the dimensions of the FLEXISPOT EM7 desk converter, including desktop width (35 inches), depth (16.3 inches), keyboard tray width (34.6 inches), and height adjustment range (5.7 to 19.7 inches). It also highlights the desktop load capacity of 44 lbs and keyboard tray load capacity of 11 lbs.

A diagram illustrating the compatibility of the FLEXISPOT EM7 desk converter with different desk types, including standard rectangular desks (minimum 37.4 inches wide, 24 inches deep) and L-shaped desks (minimum 16.9 inches deep on the corner).

Warranty and Support

For detailed warranty information, product registration, or technical assistance, please refer to the official FLEXISPOT website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

FLEXISPOT Official Website: www.flexispot.com

Customer Service: Refer to the contact information provided on the FLEXISPOT website or your original purchase documentation for the most current support options.