1. Introduction and Overview
Thank you for choosing the PAL Lighting EvenGlow Spa Light. This LED spa light is designed to provide vibrant, multi-color illumination for your spa, enhancing your experience with its energy-efficient and long-lasting design. Featuring a serviceable and detachable EvenGlow lens, this light operates on a safe 12VDC or 24VDC power supply and consumes 7 watts of power.
This manual provides essential information for the safe installation, operation, and maintenance of your EvenGlow Spa Light. Please read it thoroughly before installation and keep it for future reference.
2. Safety Information
WARNING: Risk of Electric Shock. Always disconnect power at the circuit breaker before installing or servicing this product.
- Installation must be performed by a qualified electrician or pool/spa professional in accordance with all local and national electrical codes.
- Ensure the power supply voltage matches the light's requirements (12VDC or 24VDC).
- Do not operate the light if the cord or lens is damaged.
- Keep children away from the installation area.
- This product is designed for outdoor spa use only.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged:
- PAL Lighting EvenGlow Spa Light (with attached 80 ft cord)
- Installation Screw (typically one)
Image: The EvenGlow Spa Light unit shown alongside its coiled 80-foot power cord, ready for installation.
Image: The retail packaging for the EvenGlow Spa Light, displaying product branding and key features.
4. Setup and Installation
The PAL Lighting EvenGlow Spa Light is designed for easy installation into compatible spa niches. Professional installation is highly recommended to ensure proper wiring and adherence to safety standards.
4.1 Pre-Installation Checks
- Verify that the spa niche is clean and free of debris.
- Ensure the power supply (transformer) is compatible with 12VDC or 24VDC output and has sufficient wattage for the light (7W).
- Confirm the 80 ft cord length is adequate for your installation without requiring extensions or splices underwater.
Image: Rear view of the EvenGlow Spa Light, showing the robust connection point for the power cord.
4.2 Installation Steps (General Guide)
- Disconnect Power: Turn off all power to the spa at the main circuit breaker.
- Route Cable: Carefully feed the 80 ft power cord through the conduit to the transformer location. Ensure there are no kinks or sharp bends in the cable.
- Mount Light: Position the EvenGlow Spa Light into the spa niche. Secure it using the provided screw, ensuring a snug fit.
- Connect to Transformer: At the transformer, connect the light's low-voltage wires to the appropriate 12VDC or 24VDC output terminals, following the transformer's instructions. Pay close attention to polarity if specified.
- Test: Once all connections are secure and verified, restore power to the spa and test the light's functionality.
Image: Front view of the EvenGlow Spa Light, showcasing its smooth lens and compact design.
5. Operating Instructions
The PAL Lighting EvenGlow Spa Light features multi-color illumination and can be controlled via a push button or an app, depending on your specific control system (sold separately).
5.1 Color Changing Functionality
The EvenGlow light cycles through various colors and color shows. The method to change colors typically involves a momentary power interruption or a dedicated control system:
- Push Button Control: If connected to a compatible push-button controller, rapidly toggle the light switch OFF and ON to advance to the next color or mode. Pause for a few seconds to set the current color.
- App Control: If integrated with a smart home or spa control system that supports app control, refer to the specific app's instructions for selecting colors, brightness, and light shows.
Refer to your spa's main control system manual for detailed instructions on how to operate the light functions.
6. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your EvenGlow Spa Light.
- Cleaning: Periodically clean the light lens with a soft cloth and mild, non-abrasive cleaner suitable for spa surfaces. Avoid harsh chemicals that could damage the lens or surrounding materials.
- Inspection: Annually inspect the light's cord for any signs of wear, cracks, or damage. Check the light housing for any signs of water ingress or deterioration.
- Lens Replacement: The EvenGlow lens is designed to be serviceable and detachable. If replacement is necessary, consult a qualified professional or PAL Lighting support for guidance.
- Winterization: If your spa is winterized, ensure the light is properly drained and protected according to your spa manufacturer's guidelines.
7. Troubleshooting
If you experience issues with your EvenGlow Spa Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the light. Faulty wiring connection. Damaged light or cord. | Check circuit breaker and power supply. Verify all electrical connections are secure (consult a professional). Inspect light and cord for visible damage. If damaged, replace the unit. |
| Light flickers or changes colors erratically. | Unstable power supply. Loose connection. Interference from other electrical devices. | Ensure stable voltage from transformer. Check and secure all wiring connections. Consult a professional to diagnose electrical interference. |
| Colors are incorrect or not cycling. | Incorrect control sequence. Control system malfunction. | Refer to your spa's control system manual for correct color change procedures. Contact your spa control system manufacturer for support. |
If troubleshooting steps do not resolve the issue, contact a qualified pool/spa technician or PAL Lighting customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 64-EGM-80 |
| Brand | PAL Lighting |
| Light Type | LED, Small Niche |
| Special Feature | Color Changing |
| Wattage | 7 watts |
| Voltage | 12VDC / 24VDC |
| Light Color | Multicolor |
| Cord Length | 80 ft |
| Product Dimensions | 10.1 x 10.1 x 5.6 inches |
| Item Weight | 6.5 pounds |
| Material | Glass |
| Indoor/Outdoor Usage | Outdoor (Spa) |
| Control Method | Push Button, App (with compatible system) |
9. Warranty Information
Specific warranty terms for the PAL Lighting EvenGlow Spa Light are provided by the manufacturer. Please refer to the warranty card included with your product or visit the official PAL Lighting website for detailed warranty coverage, terms, and conditions. Keep your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, replacement parts, or further inquiries regarding your PAL Lighting EvenGlow Spa Light, please contact PAL Lighting customer support. Contact information can typically be found on the product packaging or the official PAL Lighting website.
Manufacturer: PAL PRODUCTS, INC.
Please have your product model number (64-EGM-80) and purchase date ready when contacting support.
