Introduction
With the dual monitor stand from DIGITUS® you can conveniently position two monitors of sizes 15" - 32" at your desk. The quick release feature also makes it easier to install the monitors. The VESA mount is simply pushed into the corresponding mount and fixed with a screw. Easily align the monitors according to your needs and can pan, tilt or rotate the monitors themselves, e.g. for portrait monitors. You can also adjust a height adjustment of up to 40 cm. In addition, the cables of the monitors can be neatly laid through the included cable routes. Do something good for yourself and your health by adjusting the monitor optimally to your body and sitting position.
Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or defective.
- Do not exceed the maximum weight capacity of 2 x 8 kg (17.6 lbs) per monitor arm.
- Ensure the desk surface is stable and capable of supporting the combined weight of the stand and monitors.
- Always use two people for lifting and positioning heavy monitors to prevent injury.
- Tighten all screws firmly, but do not overtighten to avoid stripping threads.
- Keep children and pets away during assembly.
What's in the Box
- Universal dual monitor stand
- Mounting material (screws, washers, tools)
- Installation instructions (this manual)
Image: Overview of the DIGITUS Dual Monitor Stand components, including the base, central pole, monitor arms, and VESA plates.
Setup and Installation
Follow these steps to assemble and install your DIGITUS Dual Monitor Stand.
- Assemble the Base: Attach the central pole to the heavy-duty base using the provided screws. Ensure it is securely fastened to provide a stable foundation for your monitors.
- Attach Monitor Arms: Slide the monitor arms onto the central pole. Adjust their height to your desired position and secure them with the locking mechanism.
- Install VESA Plates: Attach the VESA mounting plates to the back of your monitors. The stand supports VESA patterns 75x75mm and 100x100mm. Use the appropriate screws for your monitor.
Image: Rear view of two monitors mounted on the stand, illustrating the VESA attachment points and cable routing.
- Mount Monitors: Carefully slide the monitors (with VESA plates attached) onto the monitor arms' quick-release slots. Ensure they click into place and are secured with the safety screws.
- Cable Management: Utilize the integrated cable clips or channels along the arms and pole to route your monitor cables neatly. This helps maintain a tidy workspace.
Image: Front view of two monitors securely mounted on the DIGITUS stand, demonstrating a clean setup.
Operating and Adjustments
The DIGITUS Dual Monitor Stand offers flexible adjustments for optimal viewing comfort.
- Height Adjustment: Loosen the clamp on the central pole to slide the monitor arms up or down. Retighten the clamp firmly once the desired height is achieved.
- Tilt Adjustment: Each monitor can be tilted up to 45 degrees (both up and down) to reduce glare and optimize viewing angles. Loosen the tilt knob behind the VESA plate, adjust, and retighten.
- Swivel Adjustment: The monitor arms can swivel horizontally to position your screens as needed.
- Rotation (Portrait/Landscape): Monitors can be rotated 360 degrees at the VESA plate, allowing for easy switching between landscape and portrait orientations.
- Cable Management: Use the integrated cable clips to route power and video cables along the arms and down the central pole for a clean and organized workspace.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your monitor stand.
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Check Connections: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
- Lubrication: No lubrication is typically required for this type of stand. If any joints become stiff, consult professional advice.
Troubleshooting
If you encounter issues with your DIGITUS Dual Monitor Stand, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Screws not tightened; uneven desk surface; monitors too heavy. | Ensure all base and arm screws are fully tightened. Place the stand on a flat, stable surface. Verify monitor weight is within limits (max 8 kg per arm). |
| Monitors are not level. | Uneven VESA plate attachment; arm height not perfectly aligned. | Adjust the height of individual monitor arms slightly. Ensure VESA plates are mounted straight on the monitors. |
| Difficulty tilting monitors. | Tilt knob too tight or too loose. | Loosen the tilt knob slightly to adjust, then retighten to secure the desired angle. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Digitus |
| Model Number | DA-90401 |
| Series | DA-90401 |
| Item Weight | 8.6 pounds |
| Product Dimensions (LxWxH) | 15 x 32.01 x 6.69 inches |
| Mounting Type | Tabletop Mount |
| Movement Type | Tilt, Swivel, Rotate |
| Maximum Compatible Monitor Size | 32 Inches |
| Minimum Compatible Monitor Size | 15 - 32 Inches |
| Maximum Tilt Angle | 45 Degrees |
| Material | Alloy Steel |
| VESA Compatibility | 75 x 75 mm, 100 x 100 mm |
| Max Load Capacity | 2 x 8 kg (17.6 lbs) |
Warranty and Support
This product comes with a 1-year EU spare part availability duration, indicating support for replacement parts within this period.
For further assistance, technical support, or warranty claims, please contact DIGITUS customer service through their official website or the retailer where the product was purchased. Please have your model number (DA-90401) and purchase information ready.
For more information, visit: www.digitus.info
