Introduction
This manual provides essential instructions for the safe and efficient use of your Electrolux Renew 800 Steam Iron Station, model E8ST1-8EGM. Please read these instructions carefully before using the appliance and retain them for future reference.
Image: The Electrolux Renew 800 Steam Iron Station, featuring the iron unit docked in its grey water tank base, with a braided power cord.
Important Safety Information
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Do not immerse the appliance in water or other liquids.
- Ensure the voltage indicated on the rating plate corresponds to your mains voltage.
- Keep the iron and its cord out of reach of children when it is switched on or cooling down.
- Never leave the iron unattended while it is connected to the mains supply.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- Use the iron only for its intended household use.
Setup and First Use
Unpacking
Carefully remove the iron station from its packaging. Remove all protective films and labels from the appliance.
Image: The Electrolux Renew 800 Steam Iron Station packaging box, showing the product image and branding.
Filling the Water Tank
- Ensure the iron is unplugged from the power outlet.
- Remove the water tank from the base unit.
- Open the water tank cap.
- Fill the water tank with clean tap water up to the "MAX" indicator line. Do not overfill.
- Close the water tank cap securely and reinsert the tank into the base unit.
Image: A hand pouring water into the transparent water tank of the Electrolux Renew 800 Steam Iron Station, indicating the filling process.
Note: For optimal performance and to prolong the life of your appliance, it is recommended to use distilled or demineralized water in areas with very hard water.
Connecting to Power
Place the iron station on a stable, heat-resistant surface. Plug the power cord into a grounded electrical outlet. The indicator light will illuminate, signaling that the appliance is heating up.
Operating Instructions
Selecting Temperature and Steam Settings
The Electrolux Renew 800 features various settings for different fabric types. Allow the iron to reach the selected temperature before beginning to iron.
Image: Close-up of the Electrolux Renew 800 iron unit, highlighting the control panel with fabric settings and steam options.
- PrecisionCare™ Technology: This system automatically adjusts temperature and steam for various fabrics.
- Fabric Selection: Use the controls on the iron to select the appropriate fabric type (e.g., Linen, Cotton, Wool, Silk, Synthetics).
- Steam Boost: Press the steam boost button for an extra burst of steam to tackle stubborn creases.
Image: The Electrolux Renew 800 iron gliding over a blue shirt, demonstrating its use for wrinkle removal.
Ironing Techniques
- Always iron on a suitable ironing board.
- Start with fabrics that require lower temperatures and gradually move to higher temperatures.
- For delicate fabrics, iron on the reverse side or use a pressing cloth.
- Utilize the continuous steam function for efficient wrinkle removal.
Image: The golden soleplate of the Electrolux Renew 800 iron emitting a powerful jet of steam, illustrating its steam function.
Image: A hand holding the Electrolux Renew 800 iron, demonstrating its ergonomic design and ease of use on a light brown fabric.
The iron features an anti-drip system to prevent water stains on your garments, even at low temperatures.
Image: Water droplets on a blue fabric, with a "Recommended by HH Our Outdoor Partner" logo, suggesting the iron's effectiveness on various materials and its anti-drip capabilities.
Care and Maintenance
Cleaning the Soleplate
To clean the soleplate, wipe it with a damp cloth and a non-abrasive cleaner when the iron is cool. Do not use metallic scouring pads or abrasive cleaners.
Descaling (Anti-Calc System)
The Renew 800 is equipped with an anti-calc system to reduce limescale build-up. Regular descaling is still recommended, especially in hard water areas. Refer to the specific descaling instructions in the full manual for your model.
Storage
After use, unplug the iron and allow it to cool completely. Empty any remaining water from the tank. Store the iron station in an upright position in a dry, safe place.
Image: The Electrolux Renew 800 Steam Iron Station neatly stored on a countertop in a modern laundry room setting, alongside folded clothes and other laundry accessories.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron does not heat up. | Not plugged in; power outlet faulty; thermostat setting too low. | Check power connection; try another outlet; adjust temperature setting. |
| No steam or insufficient steam. | Water tank empty; iron not hot enough; steam button not pressed. | Fill water tank; wait for iron to heat up; press steam button. |
| Water leaks from soleplate. | Temperature too low for steam; water tank overfilled. | Increase temperature; do not overfill water tank. |
| White flakes coming from soleplate. | Limescale build-up. | Perform descaling procedure. |
If the problem persists after attempting these solutions, please contact Electrolux customer service.
Technical Specifications
- Brand: Electrolux
- Model Number: E8ST1-8EGM (910013386)
- Power: 2200 Watts
- Voltage: 230 Volts
- Steam Pressure: 7.5 bar
- Product Dimensions (L x W x H): 26 x 28.1 x 36 cm
- Item Weight: 460 g
- Base Material: Stainless Steel
- Model Year: 2020
Warranty and Support
Your Electrolux Renew 800 Steam Iron Station is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.
For technical support, spare parts, or service, please visit the official Electrolux website or contact their customer service department in your region. Ensure you have your model number (E8ST1-8EGM) and serial number ready when contacting support.
Online Resources: www.electrolux.com
