Introduction
Thank you for choosing the PowerPac PPH2200 Hair Dryer. This manual provides essential information for the safe and efficient use of your new appliance. Please read these instructions carefully before use and retain them for future reference.

Image 1: The PowerPac PPH2200 Hair Dryer. This image displays the complete hair dryer unit, highlighting its compact design, foldable handle, and the concentrator nozzle. The main body is black with subtle gold accents on the barrel and control switch.
Important Safety Instructions
To reduce the risk of electric shock, fire, or injury, always follow basic safety precautions when using electrical appliances. Read all instructions before using this hair dryer.
- Do not use near water: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
- Unplug after use: Always unplug the appliance immediately after use.
- Supervision: Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Power cord: Do not operate any appliance with a damaged cord or plug. If the appliance is not working properly, has been dropped or damaged, or dropped into water, return it to a service center for examination and repair.
- Keep air inlets clear: Ensure the air inlet and outlet are free from lint, hair, and other obstructions.
- Overheating protection: The appliance is equipped with an overheating protection system. If the dryer overheats, it will automatically shut off. Unplug the dryer and allow it to cool down for a few minutes before restarting. Check for any blockages in the air inlets or outlets.
- Electric leakage protection: This device includes electric leakage protection for enhanced safety.
Product Components
Familiarize yourself with the parts of your PowerPac PPH2200 Hair Dryer.

Image 2: Detail of the handle and control switch. This image provides a closer look at the ergonomic handle and the two-speed control switch, which is gold-colored against the black body. The foldable hinge is also visible.
- Concentrator Nozzle: Directs airflow for precise styling.
- Air Outlet: Where the heated air exits.
- Main Body: Houses the motor and heating element.
- Control Switch: Used to select speed settings.
- Foldable Handle: Allows for compact storage and portability.
- Air Inlet Grille: Where air is drawn into the dryer. Ensure this is kept clean.
- Power Cord: For connecting to an electrical outlet.
Setup
Follow these steps to prepare your hair dryer for use:
- Unpack: Carefully remove the hair dryer and all packaging materials.
- Unfold Handle: If the handle is folded for storage, gently unfold it until it clicks securely into place.
- Attach Nozzle (Optional): For concentrated airflow, attach the concentrator nozzle to the front of the dryer.
- Power Connection: Ensure your hands are dry, then plug the power cord into a suitable electrical outlet (AC 220-240V, 50/60Hz).
Operating Instructions
The PowerPac PPH2200 features 2 speed settings for versatile styling.

Image 3: Side view showing the air inlet. This image focuses on the rear of the hair dryer, illustrating the air inlet grille which must be kept clear for optimal performance and to prevent overheating. The foldable handle's pivot point is also visible.
- Power On: Slide the control switch to your desired speed setting.
- Setting 1: Low speed, gentle drying.
- Setting 2: High speed, fast drying.
- Drying Hair: Hold the hair dryer at a comfortable distance from your hair, typically 15-20 cm. Move the dryer continuously to avoid concentrating heat in one area.
- Styling: Use the concentrator nozzle for targeted airflow to style specific sections of hair.
- Power Off: After use, slide the control switch to the "0" (off) position. Unplug the appliance from the electrical outlet.
Maintenance and Storage
Proper maintenance ensures the longevity and optimal performance of your hair dryer.
- Cleaning:
- Always unplug the hair dryer before cleaning.
- Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Regularly clean the air inlet grille to prevent lint and dust buildup, which can restrict airflow and cause overheating. Use a soft brush or vacuum cleaner to remove debris.
- Storage:
- Allow the appliance to cool completely before storing.
- Fold the handle for compact storage.
- Store in a dry, safe place, out of reach of children. Do not wrap the power cord around the appliance, as this can damage the cord.
Troubleshooting
If you encounter issues with your PowerPac PPH2200 Hair Dryer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hair dryer does not turn on. | Not plugged in; power outlet fault; control switch in "0" position. | Ensure the plug is securely inserted. Test the outlet with another appliance. Slide the control switch to "1" or "2". |
| Hair dryer stops working during use. | Overheating protection activated. | Unplug the dryer and allow it to cool for several minutes. Check and clean the air inlet/outlet for blockages. Replug and restart. |
| Weak airflow or unusual noise. | Blocked air inlet grille. | Unplug the dryer and clean the air inlet grille to remove lint and dust. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
Key technical specifications for the PowerPac PPH2200 Hair Dryer:
- Model: PPH2200
- Power: 1100-1300 Watts
- Voltage: AC 220-240V, 50/60Hz
- Number of Speeds: 2
- Features: Foldable handle, Electric leakage protection, Overheating protection, Optimized air duct design.
- Dimensions: Approximately 12 x 8 x 20 cm
- Weight: Approximately 0.66 kg
- Manufacturer: Everson Electrical (S) Pte Ltd
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact the manufacturer directly.
Manufacturer: Everson Electrical (S) Pte Ltd
Please retain your proof of purchase for any warranty claims.



