1. Introduction and Overview
This manual provides essential information for the safe and effective use of your Batavia 5.0Ah 18V Maxxpack Collection Battery (Model: 7063735). The Maxxpack Collection is a versatile 18V Li-Ion battery platform designed for various tools used around the house, garden, and workshop. This battery is compatible with over 30 tools within the Maxxpack system, allowing you to power multiple devices with a single battery and charger.
Please read this manual thoroughly before first use and keep it for future reference.
2. Safety Instructions
Always observe the following safety precautions to prevent injury and damage to the battery or connected tools.
- Charging: Only use chargers specifically designed for Batavia Maxxpack 18V Li-Ion batteries. Do not attempt to charge non-rechargeable batteries. Charge the battery in a well-ventilated area, away from flammable materials.
- Handling: Do not short-circuit the battery terminals. Avoid dropping or subjecting the battery to strong impacts. Do not open, disassemble, or modify the battery pack.
- Temperature: Do not expose the battery to extreme temperatures (above 50°C or below 0°C). Avoid direct sunlight and store in a cool, dry place.
- Damage: If the battery is damaged, leaking, or shows signs of overheating, discontinue use immediately. Do not touch leaking fluid. Dispose of damaged batteries according to local regulations.
- Water: Keep the battery away from water and moisture.
- Children: Keep batteries out of reach of children.
3. Product Features and Components
The Batavia 5.0Ah 18V Maxxpack Collection Battery is a high-capacity Lithium-Ion power source for your cordless tools.
Figure 3.1: The Batavia 5.0Ah 18V Maxxpack battery, showing its charge indicator lights. The green lights indicate the current charge level.
Figure 3.2: The Batavia 5.0Ah 18V Maxxpack battery connected to a compatible Batavia 18V charger. Ensure proper alignment when placing the battery on the charger.
Figure 3.3: A comparison of Batavia Maxxpack batteries, showcasing the 2Ah, 4Ah, and 5Ah variants. All are part of the same 18V Maxxpack system.
Key features include:
- Voltage: 18V
- Capacity: 5.0 Ampere-hours (Ah) / 5000 Milliamperestunde (mAh)
- Battery Type: Lithium-Ion (Li-Ion)
- Compatibility: Part of the Batavia Maxxpack Collection, compatible with over 30 tools.
- Charge Indicator: Integrated LED lights to display current charge level.
4. Setup
4.1 Initial Charging
- Unpack the battery from its packaging.
- Ensure you have a compatible Batavia Maxxpack 18V battery charger.
- Plug the charger into a suitable power outlet.
- Align the battery with the charger's terminals and slide it firmly into place until it clicks.
- The charger's indicator light will typically show the charging status (refer to your charger's manual for specific indications).
- Allow the battery to fully charge before first use. A full charge can take several hours depending on the charger and initial battery level.
4.2 Attaching to a Tool
- Ensure the tool is switched off and disconnected from any power source if applicable.
- Align the battery with the battery slot on your Batavia Maxxpack 18V tool.
- Slide the battery into the slot until it locks securely into place. You should hear a click.
- To remove the battery, press the release button(s) on the battery or tool and slide the battery out.
5. Operating
5.1 Checking Battery Charge
The Batavia 5.0Ah Maxxpack battery features an integrated charge indicator. Press the small button next to the LED lights to display the current charge level.
- 4 Green Lights: Full charge
- 3 Green Lights: Approximately 75% charge
- 2 Green Lights: Approximately 50% charge
- 1 Green Light: Low charge, recharge soon
- No Lights: Battery is depleted or faulty.
5.2 General Usage Tips
- For optimal performance, avoid completely draining the battery before recharging.
- If the battery becomes excessively hot during use, allow it to cool down before recharging or continuing operation.
- Always remove the battery from the tool when not in use or when performing maintenance on the tool.
6. Maintenance
6.1 Cleaning
Keep the battery clean and free from dust and debris. Use a soft, dry cloth to wipe the exterior. Do not use harsh chemicals or abrasive cleaners. Ensure the battery terminals are clean and free of corrosion.
6.2 Storage
For long-term storage, store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store Li-Ion batteries with a partial charge (around 50%) to prolong their lifespan. Recharge the battery every 3-6 months during long storage periods.
6.3 Battery Longevity
To maximize the lifespan of your battery:
- Avoid deep discharges.
- Avoid overcharging (modern chargers typically prevent this, but always use a compatible charger).
- Store at moderate temperatures.
- Do not expose to moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging. |
|
|
| Battery not powering tool. |
|
|
| Battery gets hot during use/charging. |
|
|
If problems persist after attempting these solutions, please contact Batavia customer support.
8. Specifications
| Specification | Value |
|---|---|
| Brand | Batavia |
| Model Number | 7063735 |
| Battery Type | Lithium-Ion |
| Voltage | 18 Volt |
| Capacity | 5.0 Ah (5000 mAh) |
| Product Dimensions | 12.3 x 8.5 x 7.8 cm |
| Item Weight | 40 g |
| Recommended Use | Power tools (Elektrowerkzeug) |
9. Warranty and Support
For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Batavia website.
If you require technical assistance, have questions about your product, or need to report an issue, please contact Batavia customer support through their official channels.
Batavia Official Website: www.batavia.eu (This is a general link, specific support contact may vary by region).
