Introduction
This manual provides instructions for the Quntis GL-TYZ-L203 360° Projection Alarm Clock Radio. Please read this manual thoroughly before operating the device to ensure proper use and to understand all features.
Image: The Quntis GL-TYZ-L203 Projection Alarm Clock Radio, displaying the time and projecting it onto a surface.
Package Contents
- Quntis GL-TYZ-L203 Projection Alarm Clock Radio
- USB Power Cable
- User Manual
- CR2032 Battery (pre-installed for memory backup)
Image: The alarm clock, its USB power cable, and the user manual, illustrating the items included in the package.
Setup
1. Power Connection
Connect the provided USB power cable to the clock and plug the other end into a 5V/1A USB power adapter (not included). The clock requires AC power for all functions to operate.
2. Battery Backup
A CR2032 battery is pre-installed for memory backup. This battery preserves time and alarm settings during a power outage. It does not power the clock's display or functions.
Operating Instructions
1. Setting Time and Date
- Press and hold the SET button to enter time setting mode.
- Use the VOL+ and VOL- buttons to adjust the hour. Press SET to confirm.
- Repeat for minutes.
- Select 12-hour or 24-hour format using VOL+/VOL-. Press SET to confirm.
2. Setting Alarms (Alarm 1 & Alarm 2)
Image: A visual representation of setting two separate alarms and utilizing the snooze feature.
- Press and hold the ALARM 1 or ALARM 2 button to enter alarm setting mode.
- Use VOL+/VOL- to adjust the alarm hour. Press the respective alarm button to confirm.
- Repeat for alarm minutes.
- Select alarm sound: "BiBi" (beep) or FM Radio. Use VOL+/VOL- to choose. Press the alarm button to confirm.
- Adjust alarm volume (Level 1-15) using VOL+/VOL-. Press the alarm button to confirm.
- To activate/deactivate an alarm, press the ALARM 1 or ALARM 2 button briefly. An alarm icon will appear/disappear on the display.
Snooze Function
When an alarm sounds, press the SNOOZE button to activate snooze. The alarm will sound again after 5-60 minutes (adjustable). To turn off the alarm completely, press any other button except SNOOZE.
3. Projection Feature
Image: The alarm clock projecting time onto a wall, demonstrating the 180° projection angle adjustment and 360° rotatable projection for optimal viewing.
- Activate/Deactivate: Press the PROJECTION button to turn the projection on or off.
- Brightness Adjustment: Press the PROJECTION button repeatedly to cycle through two brightness levels (soft light, bright light) or turn off the projection.
- Angle Adjustment: The projector arm can be rotated 180 degrees manually to direct the time onto a wall or ceiling.
- Time Orientation: The projected time can be rotated 360 degrees by adjusting the lens on the projector arm to ensure correct orientation.
Image: Comparison of soft light and bright light projection, along with three levels of display brightness (low, medium, bright).
4. Display Brightness Adjustment
Press the DIMMER button (often labeled with a sun icon) repeatedly to cycle through 3 levels of display brightness (low, medium, bright) to suit your preference.
5. FM Radio
Image: Icons representing FM radio frequency range (87.5-108 MHz), 15 preset radio memories, 5-90 minute sleep timer, and 15-level adjustable volume.
- Turn On/Off: Press the RADIO/SLEEP button briefly to turn the FM radio on or off.
- Auto Scan: Press and hold the VOL+ and VOL- buttons simultaneously to automatically scan and save available FM stations. The clock can store up to 15 stations.
- Manual Tuning: Use the VOL+/VOL- buttons to manually tune to a specific frequency.
- Volume Adjustment: Use the VOL+/VOL- buttons to adjust the radio volume (Level 0-15).
- Sleep Timer: When the radio is on, press the RADIO/SLEEP button repeatedly to set a sleep timer (e.g., 5, 10, 15... 90 minutes). The radio will automatically turn off after the set time.
6. USB Charging Port
A 5V/1.2A USB output port is located on the back of the clock. This port can be used to charge smartphones or other USB-powered devices.
Maintenance
- Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Keep the device away from water and high humidity.
- Avoid placing the clock in direct sunlight or near heat sources.
- Ensure proper ventilation around the device.
Troubleshooting
- No Display/Functions: Ensure the USB power cable is securely connected to a working power adapter and outlet. The backup battery only saves settings, it does not power the display.
- Projection Unclear: Adjust the focus by rotating the lens on the projector arm. Ensure the projection distance is within 1-3 meters (3.3-10 feet) for optimal clarity.
- Alarm Not Sounding: Verify that the alarm is activated (alarm icon visible on display) and the volume is not set to 0.
- Poor Radio Reception: Extend the FM antenna fully. Try repositioning the clock to improve signal reception.
- Time/Settings Lost After Power Outage: Check if the CR2032 backup battery is correctly installed and has sufficient charge.
Specifications
| Brand | Quntis |
| Model Number | GL-TYZ-L203 |
| Display Type | Digital LED |
| Power Source | Corded Electric (USB 5V/1A adapter required, not included) |
| Backup Battery | CR2032 (for memory backup only) |
| FM Radio Frequency | 87.5 - 108 MHz |
| USB Charging Output | 5V/1.2A |
| Projection Distance | 1 - 3 meters (3.3 - 10 feet) |
| Product Dimensions | 17 x 0.03 x 8 cm (approx. 6.7 x 0.01 x 3.1 inches) |
| Weight | 227 g (approx. 0.5 lbs) |
Support Information
For any questions or assistance with your Quntis GL-TYZ-L203 Projection Alarm Clock Radio, please contact Quntis customer service. We aim to respond to inquiries within 12 hours.
Refer to the official Quntis store for further information: Quntis Store
