Kodak 4K M7 Broadcast Field Monitor

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Kodak 4K M7 Broadcast Field Monitor. Please read this manual thoroughly before using the device to ensure optimal performance and safety. Keep this manual for future reference.

2. Safety Information

• Do not expose the monitor to rain, moisture, or extreme temperatures.
• Avoid placing the monitor near heat sources or in direct sunlight.
• Use only the power adapter specified for this device.
• Do not attempt to disassemble or modify the monitor. Refer all servicing to qualified personnel.
• Clean the monitor with a soft, dry cloth. Avoid using liquid cleaners or aerosols.

3. Package Contents

Verify that all items are present in the package:

• 1 x Kodak 4K M7 Broadcast Field Monitor
• Other accessories (e.g., power adapter, cables) may vary by region and package.

4. Product Overview

The Kodak 4K M7 Broadcast Field Monitor is designed to provide accurate and sharp images for improved framing and focus assist during video production. It features a 7-inch LCD display with a high resolution, making it suitable for various professional and amateur applications.

Figure 1: Front view of the Kodak 4K M7 Broadcast Field Monitor, showing the 7-inch display and control buttons.

Key Features:

• 7-inch LCD Monitor Display
• HD 1920 x 1200 Screen Resolution
• HDMI Input and Output for versatile connectivity
• Supports 4K signals
• High Dynamic Range (HDR) and Wide Color Gamut support

5. Setup

Follow these steps for initial setup of your monitor:

1. Mounting: Attach the monitor to your camera rig or stand using the appropriate mounting hardware. Ensure it is securely fastened.
2. Power Connection: Connect the power adapter to the monitor's power input port and then to a suitable power outlet.
3. Video Input: Connect your camera or video source to the monitor's HDMI input port using an HDMI cable. If needed, you can use the HDMI output to loop through the signal to another display.
4. Power On: Press the power button on the monitor to turn it on.

6. Operating

Once powered on and connected, the monitor will display the video feed from your source. Use the control buttons on the monitor to navigate menus and adjust settings such as brightness, contrast, color, and aspect ratio. Refer to the on-screen display (OSD) for specific menu options.

Focus and Framing Assist:

The high-resolution display and features like focus peaking (if available in the monitor's firmware) can significantly aid in achieving critical focus and precise framing for your shots. Utilize the monitor to review your composition and ensure subjects are sharp.

7. Maintenance

Cleaning:

• Gently wipe the screen with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water, but never spray liquid directly onto the screen.
• Clean the monitor body with a dry, soft cloth.

Storage:

When not in use, store the monitor in a cool, dry place, away from direct sunlight and excessive dust. It is recommended to use a protective case for transport.

8. Troubleshooting

• No Power: Ensure the power adapter is securely connected to both the monitor and a working power outlet. Check if the power button is pressed.
• No Signal: Verify that the HDMI cable is correctly connected to both the camera/source and the monitor. Ensure the camera/source is powered on and outputting a signal. Check the monitor's input selection.
• Poor Picture Quality: Adjust brightness, contrast, and color settings in the monitor's menu. Ensure the input signal resolution matches the monitor's capabilities.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official KODAK website. Keep your proof of purchase for warranty claims.