Leuchten Direkt Paul Neuhaus 11525-13 Circle Suspension User Manual

1. Product Overview

The CIRCLE LED pendant light features a modern design with two luminous rings equipped with an LED panel, emitting a warm white, glare-free light. Its elegant anthracite finish complements various interior styles. This fixture incorporates "Simply Dim" continuous dimming technology, allowing easy brightness adjustment via your existing wall switch.

Figure 1: Main view of the Leuchten Direkt Paul Neuhaus 11525-13 Circle Suspension LED pendant light, showcasing its two circular LED rings and sleek design.

2. Safety Information

Please read these instructions carefully before installation and use. Keep this manual for future reference.

• Installation must be performed by a qualified electrician in accordance with local wiring regulations.
• Ensure the power supply is disconnected before installation, maintenance, or cleaning.
• Do not modify the product in any way.
• This product is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Avoid direct eye exposure to the LED light source.

3. Package Contents

Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer.

• LED Pendant Light Fixture (Model 11525-13)
• Mounting Hardware (screws, wall plugs, etc.)
• Instruction Manual (this document)

Note: The product specifications state "Composants inclus: aucune", which typically refers to additional accessories beyond the main fixture and standard mounting hardware. Standard mounting hardware is assumed to be included for installation.

4. Setup and Installation

This section provides general guidelines for installing your pendant light. Always consult a qualified electrician for professional installation.

1. Preparation: Turn off the main power supply at the circuit breaker before beginning any electrical work.
2. Mounting the Canopy: Secure the mounting bracket to the ceiling junction box using the provided screws. Ensure it is firmly attached to a structural element.
3. Wiring: Connect the light fixture's wires to your household wiring according to local electrical codes (Live to Live, Neutral to Neutral, Ground to Ground). Ensure all connections are secure.
4. Securing the Fixture: Attach the fixture canopy to the mounting bracket, ensuring all wires are tucked safely inside.
5. Adjusting Height: The suspension cables can be adjusted to achieve the desired hanging height. Carefully feed the cables through the canopy mechanism to shorten or lengthen them.
6. Final Check: Once installed, restore power and test the light.

Figure 2: Top view of the pendant light, illustrating the ceiling mounting plate and suspension wires.

5. Operating Instructions

5.1. Standard Operation

Simply turn on the light using your standard wall switch. The light will illuminate at its last saved brightness setting, or at full brightness if no setting was previously saved.

5.2. Simply Dim Technology

The "Simply Dim" technology allows you to continuously adjust the light intensity from 100% down to 10% using your existing wall switch (rocker, pull, cord, or wall switch). No special dimmer is required.

1. To Start Dimming: Turn the light ON. If you turn the light OFF and then ON again within 3 seconds, the dimming process will begin.
2. Dimming Cycle: The light will continuously cycle through its brightness levels (from 100% down to 10% and back up).
3. Saving Brightness: To save a desired brightness level, simply turn the light OFF when it reaches that intensity during the dimming cycle.
4. Memory Function: The light will remember the last chosen brightness setting even after being disconnected from the mains power. When you turn the light back on, it will illuminate at the saved brightness.

Figure 3: Visual representation of the "Simply Dim" continuous dimming feature and memory function, highlighting ease of use with a standard wall switch.

6. Maintenance

To ensure the longevity and appearance of your light fixture, follow these simple maintenance guidelines:

• Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
• Bulb Replacement: This fixture uses integrated LED technology. The LED light source is not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced or serviced by a professional.
• Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.

7. Troubleshooting

If you experience issues with your light fixture, refer to the table below for common problems and solutions.

8. Specifications

Detailed technical specifications for the Leuchten Direkt Paul Neuhaus 11525-13 Circle Suspension light fixture.

Figure 4: Close-up view of the illuminated LED rings, demonstrating the warm white light output.

9. Warranty and Support

9.1. Warranty Information

This Leuchten Direkt product comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and material faults. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer, Paul Neuhaus. You can find more information about LeuchtenDirekt products on their official website.

Manufacturer: Paul Neuhaus

Brand: LeuchtenDirekt

Note: Specific contact details (phone, email, website) are not provided in the product data. Please refer to the product packaging or the retailer's website for direct support contacts.