ARCADE Skateboard Trainers Instruction Manual

Introduction

The ARCADE Skateboard Trainers are designed to assist skateboarders of all skill levels in learning and mastering tricks. These trainers provide a stable base, preventing the skateboard from rolling away during practice, thereby building confidence and accelerating the learning process for various maneuvers such as ollies, kickflips, and shuv-its. The set includes two durable polyurethane trainers.

Setup

Installing the ARCADE Skateboard Trainers is a quick and tool-free process. Each set contains two trainers designed to fit around your skateboard trucks.

1. Identify the skateboard trucks. The trainers are designed to snap onto the trucks, not over the wheels.
2. Align one trainer with a truck assembly. The trainer's curved sections should cradle the truck.
3. Firmly press the trainer onto the truck until it snaps securely into place. Repeat for the second trainer on the other truck or as needed for specific trick modes.

Image: Two black ARCADE Skateboard Trainers shown from above, highlighting their simple, tool-free assembly.

The trainers are compatible with various skateboard truck widths and can accommodate wheel sizes up to 56mm. They are suitable for use on all surfaces, providing stability whether practicing on carpet, concrete, or other ground types.

Image: A close-up of an ARCADE Skateboard Trainer installed on a skateboard, illustrating its fit around the truck and compatibility with wheels up to 56mm.

Operating Instructions

The ARCADE Skateboard Trainers offer enhanced stability for practicing various skateboard tricks. They prevent the board from rolling, allowing you to focus on foot placement and body mechanics.

Trick Modes:

• Ollie Mode: For practicing ollies, install both trainers on the same truck (either front or back). This configuration provides maximum stability for lifting the board.
• Pop Shove It Mode: For practicing pop shove-its, install one trainer on the front truck and the other on the rear truck, on opposing sides. This setup allows for board rotation while maintaining some stability.

Always ensure the trainers are securely attached before beginning practice. Start with basic movements to get accustomed to the feel of the board with the trainers installed.

Image: A skateboarder's feet positioned on a skateboard equipped with ARCADE trainers, demonstrating the stable platform for trick practice.

Maintenance

The ARCADE Skateboard Trainers are constructed from durable polyurethane, designed to withstand regular use. To ensure longevity and optimal performance:

• Cleaning: Wipe the trainers with a damp cloth to remove dirt and debris. Avoid harsh chemicals that may degrade the material.
• Storage: Store the trainers in a cool, dry place away from direct sunlight when not in use.
• Inspection: Periodically inspect the trainers for any signs of wear or damage. Replace if cracks or significant deformation are observed.

Image: A pair of ARCADE Skateboard Trainers, emphasizing their robust construction from heavy-duty polyurethane.

Troubleshooting

If you encounter issues while using your ARCADE Skateboard Trainers, consider the following:

• Trainers not fitting securely: Ensure the trainers are correctly aligned with the skateboard trucks and pressed firmly until they snap into place. They are designed to fit all standard skateboard trucks.
• Board still moving too much: Verify that both trainers are properly installed. For maximum stability, ensure both trainers are on the same truck for tricks like ollies. For pop shove-its, ensure they are on opposing wheels as instructed.
• Difficulty removing trainers: The trainers are designed for a secure fit. Apply firm, even pressure to detach them from the trucks. A slight wiggling motion may assist in removal.

Specifications

Warranty and Support

Warranty Information:

The ARCADE Skateboard Trainers come with a 12-Month Warranty from the date of purchase. This warranty covers manufacturing defects. Additionally, a 30-Day Money Back Guarantee is offered, allowing for returns within 30 days of purchase if you are not satisfied with the product.

For warranty claims or to inquire about the money-back guarantee, please retain your proof of purchase.

Customer Support:

For further assistance, questions, or support regarding your ARCADE Skateboard Trainers, please visit the official ARCADE website or contact their customer service department. Refer to the product packaging or the ARCADE brand store on Amazon for specific contact details.

You can also visit the ARCADE Store on Amazon for more product information and support resources.