Linon White 3-Piece Faux Marble Tavern Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Linon White 3-Piece Faux Marble Tavern Set. Please read all instructions carefully before assembly and use to ensure safe and proper functionality.

The set includes one rectangular counter-height table and two backless counter-height stools. The table features a faux marble top, and the stools have padded faux leather seats. The design is space-saving, allowing stools to tuck neatly under the table when not in use.

Important Safety Information

WARNING: Cancer and Reproductive Harm

• Ensure all parts are present and undamaged before assembly.
• Do not overtighten screws during assembly to avoid damaging components.
• Place the table on a flat, stable surface.
• Do not stand on the table or stools.
• Keep small parts away from children during assembly.
• Regularly check and tighten all fasteners to ensure stability.

Package Contents

Verify that all components listed below are included in your package:

• 1 x Table Top (Faux Marble)
• 4 x Table Legs
• 2 x Stool Seats (Padded, Faux Leather)
• 4 x Stool Leg Assemblies (for 2 stools)
• Hardware Pack (screws, washers, Allen wrench, etc.)
• Assembly Instructions Manual

Setup and Assembly

Assembly is required. Please follow the steps carefully. A screwdriver (not included) may be needed in addition to the provided Allen wrench.

Table Assembly

1. Carefully unbox all components and lay them out on a soft, clean surface to prevent scratches.
2. Identify the table top and the four table legs.
3. Locate the pre-installed wooden blocks in the corners on the underside of the table top. These blocks are for shipping protection and must be removed. Use a screwdriver or power drill to carefully unscrew and remove these blocks.
4. Attach each table leg to the corners of the table top. Ensure the non-slip/non-scratch material on the bottom of the legs faces downwards.
5. Insert the provided bolts (E), washers (D), and then the screw (A) into the designated holes to secure each leg. Hand-tighten as much as possible.
6. Use the provided Allen wrench to fully tighten all screws until the legs are securely fastened and stable. Do not overtighten.
7. Carefully flip the assembled table upright.

Image: Front view of the Linon White 3-Piece Faux Marble Tavern Set, showing the table and two stools.

Image: Diagram showing the dimensions of the Linon White 3-Piece Faux Marble Tavern Set, including table and stool measurements.

Stool Assembly (Repeat for both stools)

1. Identify the stool leg assemblies and the stool seat.
2. Connect the two side frames of the stool using the crossbars. Ensure the pre-drilled holes align.
3. Insert screws (B) and (C) to secure the crossbars to the side frames. Hand-tighten initially.
4. Once the frame is assembled, place the padded faux leather seat on top.
5. Align the seat with the top of the stool frame.
6. Use screws (G) to secure the seat to the frame from underneath. A power drill can expedite this step, but be careful not to overtighten.
7. Insert the wooden buttons (H) into any visible screw holes for a finished look.

Image: Close-up view of the stool's padded faux leather seat, highlighting the stitching detail.

Image: Side view of a stool, illustrating the sturdy solid wood legs in a white painted finish and the backless design.

Operating Instructions

Your Linon 3-Piece Faux Marble Tavern Set is designed for versatile use in various living spaces.

• Dining Table: Use the table and stools as a compact dining solution for two.
• Desk: The counter height makes it suitable as a standing desk or a high-top workspace.
• Buffet/Serving Area: Utilize the table as an additional surface for serving food or displaying items.
• Space-Saving: The backless stools are designed to tuck neatly under the table when not in use, maximizing floor space.

Image: The Linon White 3-Piece Faux Marble Tavern Set positioned in a modern living space, showcasing its compact and functional design.

Maintenance and Care

• Cleaning: For the faux marble top and wooden legs, wipe clean with a damp cloth. Avoid harsh chemicals.
• Faux Leather Seats: Hand wash only. Use a mild soap and water solution for cleaning, then wipe dry.
• Regular Checks: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Protection: The table legs are equipped with non-slip/non-scratch material to protect your floors.

Troubleshooting

• Wobbly Table/Stools: Ensure all screws are fully tightened. If wobbling persists, check that the table is on an even surface.
• Chipping/Blemishes: The faux marble top is durable but can be susceptible to chipping if struck with force. Handle with care.
• Difficulty Assembling: Refer to the detailed assembly instructions provided in the manual. For further assistance, contact customer support.

Specifications

Image: Graphic illustrating the weight limits: 275 lbs on stools and 100 lbs on the table.

Warranty Information

This product comes with a 60-day limited warranty.

Customer Support

For all assembling and part-related concerns, please reach out to us. For assembly guide requests, refer to the Product guides and documents section of this product page for review and downloading purposes.

Amazon offers 30-day easy returns and customer support for this product.

• Visit the Linon Store on Amazon