Introduction
Thank you for choosing the Brightech Quinn LED Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new floor lamp. Please read these instructions thoroughly before use and retain them for future reference.
Image: Full view of the Brightech Quinn LED Floor Lamp, showcasing its brass finish and drum lampshade.
Safety Instructions
- Ensure the lamp is unplugged from the power outlet before assembly, cleaning, or bulb replacement.
- Do not operate the lamp with a damaged cord or plug. If damaged, contact customer support.
- This lamp is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Place the lamp on a stable, level surface to prevent tipping. The weighted base is designed for stability.
- Do not attempt to modify the lamp's electrical components.
- Keep flammable materials away from the light source.
Package Contents
Verify that all components are present before beginning assembly:
- Lamp Base
- Lamp Pole Sections (typically 2-3 sections)
- Lampshade Components (fabric shade, top ring, bottom ring, support rods)
- LED Bulb (E26 base)
- Instruction Manual
Setup and Assembly
Follow these steps to assemble your Brightech Quinn LED Floor Lamp:
- Assemble the Lampshade: Carefully unroll the fabric lampshade. Attach the top and bottom metal rings to the fabric using the provided clips or magnetic strips, ensuring the shade forms a perfect cylinder. Insert the support rods if included, to maintain the shade's shape.
- Connect Pole Sections: Screw the lamp pole sections together clockwise until secure. Ensure the power cord passes freely through the pole.
- Attach Pole to Base: Screw the assembled lamp pole into the lamp base clockwise until firmly tightened. Ensure the base is stable.
- Attach Lampshade: Place the assembled lampshade onto the lamp's socket assembly. Secure it with the provided socket ring by screwing it clockwise over the socket and lampshade frame.
- Install LED Bulb: Carefully screw the included E26 LED bulb into the lamp socket clockwise until snug. Do not overtighten.
- Connect to Power: Plug the lamp's power cord into a standard 110V AC wall outlet.
Image: Diagram showing the dimensions of the Brightech Quinn LED Floor Lamp, including its 60-inch height and 17-inch shade diameter.
Operating Instructions
The Brightech Quinn LED Floor Lamp features a touch switch for easy operation.
- Turning On/Off: Locate the touch switch on the lamp pole or base. Tap the switch to turn the lamp on or off.
- Smart Home Compatibility: This lamp is compatible with smart outlets enabled for Apple HomeKit, Google Home Assistant, or Alexa (smart outlet sold separately). Connect the lamp to a compatible smart outlet to control it via voice commands or smart home apps.
Maintenance
- Cleaning: Ensure the lamp is unplugged before cleaning. Use a soft, dry cloth to wipe down the lamp base and pole. For the lampshade, a lint roller or a slightly damp cloth can be used to remove dust. Avoid abrasive cleaners or solvents.
- Bulb Replacement: The included LED bulb has an estimated lifespan of 20,000 hours (approximately 20 years with 3 hours/day use). If replacement is necessary, use an E26 base LED bulb, not exceeding 60W equivalent. Always unplug the lamp before replacing the bulb.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet. Bulb not screwed in properly. Faulty bulb. | Check if the outlet is working by plugging in another device. Ensure the bulb is securely screwed into the socket. Replace the bulb with a known working E26 LED bulb. |
| Lamp flickers. | Loose bulb connection. Incompatible dimmer (if applicable). | Tighten the bulb. Ensure the lamp is not connected to an incompatible dimmer switch, as this lamp uses a touch switch and is not designed for external dimmers unless specified. |
| Lampshade is crooked. | Socket ring not tightened evenly. Lampshade components not assembled correctly. | Unscrew and re-tighten the socket ring, ensuring even pressure. Disassemble and reassemble the lampshade components, ensuring rings and fabric are aligned. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | FL-QN-BRS |
| Dimensions (H x W x D) | 60 inches x 17 inches x 17 inches |
| Item Weight | 10.55 pounds |
| Light Source Type | LED |
| Bulb Base | E26 |
| Brightness | 800 Lumen |
| Color Temperature | 3000 Kelvin (Warm White) |
| Voltage | 110 Volts |
| Power Source | Corded Electric |
| Switch Type | Touch |
| Shade Material | Linen |
| Base Material | Brass |
| Indoor/Outdoor Usage | Indoor |
| UPC | 850012486381 |
Warranty and Support
Warranty: The Brightech Quinn LED Floor Lamp is covered by an industry-leading 3-year warranty. This warranty covers defects, malfunctions, or sudden failures when purchased through authorized channels.
Customer Support: For technical assistance, warranty claims, or any questions regarding your product, please contact Brightech USA customer support. Refer to the contact information provided on the product packaging or the official Brightech website.
