Introduction
This manual provides essential information for the setup, operation, and maintenance of your Raymarine Axiom+ 7 Multifunction Display (MFD). The Axiom+ 7 is a performance-tuned marine chartplotter designed for speed and responsiveness, featuring a powerful quad-core processor and a high-resolution IPS display. It operates on the LightHouse 3 OS, offering intuitive navigation and advanced marine electronics capabilities.
Setup and Installation
The Raymarine Axiom+ 7 display is designed for flexible installation on your vessel. It supports both surface and trunnion mounting configurations. Ensure all mounting hardware is securely fastened according to the included installation instructions.
Power and Data Connection: Connect the provided power/data cable to the appropriate port on the back of the display and to your vessel's power supply. Refer to the detailed wiring diagrams in the separate installation guide for correct connections to other marine electronics, such as transducers, radar, and external GPS antennas.
Figure 1: Raymarine Axiom+ 7 Display. This image shows the front view of the display unit, highlighting its sleek design and the main user interface with various application icons for marine navigation and fishing.
Operating Instructions
The Axiom+ 7 utilizes the LightHouse 3 Operating System, providing a user-friendly and responsive interface. All interactions are primarily managed through the capacitive touchscreen.
User Interface Overview
Upon powering on, the display presents a home screen with various application icons. These icons allow quick access to different functionalities:
- Chart: For navigation and viewing electronic charts (Navionics, C-MAP, Raymarine LightHouse Charts).
- Fishfinder: Accesses sonar functionalities, including RealVision 3D for detailed underwater imaging.
- Radar: Displays radar returns for collision avoidance and weather monitoring.
- FLIR: Integrates with compatible Forward Looking Infrared cameras.
- Dashboard: Provides customizable displays of vessel data, such as speed, depth, and engine parameters.
- Trolling: Specific features for trolling activities.
- Audio: Controls integrated audio systems.
The touchscreen supports gestures for zooming, panning, and menu navigation. The IPS display technology ensures wide viewing angles and sharp contrast, even in bright sunlight, with 25 percent more brightness (up to 1,800 nits) compared to traditional displays. The HydroTough™ Nano-coated glass screen repels water, oil, and smudges, maintaining clear visibility and accurate touch response.
Navigation Features: The system is ClearCruise™ Augmented Reality-capable, enhancing navigation decisions by overlaying identification on video feeds. It also offers fluid and fast chart redraw capabilities.
Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your Axiom+ 7 display.
- Cleaning the Screen: Use a soft, lint-free cloth dampened with fresh water to clean the HydroTough™ screen. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the coating.
- General Cleaning: Wipe down the exterior casing with a damp cloth. Ensure all ports and connectors are free from debris and moisture.
- Software Updates: Regularly check the Raymarine website for software updates to ensure your device has the latest features and performance enhancements.
- Environmental Protection: While designed for marine environments, protect the display from extreme temperatures and prolonged direct sunlight when not in use, if possible.
Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, consult the full Raymarine support documentation or contact customer service.
- No Power:
- Verify that the power cable is securely connected to both the display and the vessel's power source.
- Check the vessel's fuse or circuit breaker for the display's power circuit.
- Touchscreen Unresponsive:
- Ensure the screen is clean and free of excessive water, oil, or debris.
- Perform a soft reset by powering the unit off and then on again.
- GPS Signal Loss:
- Ensure the internal or external GPS antenna has a clear view of the sky.
- Check antenna connections if an external antenna is used.
- Chart Not Displaying Correctly:
- Verify that the chart card is properly inserted (if applicable).
- Ensure the chart region is selected and zoomed appropriately.
Specifications
| Feature | Detail |
|---|---|
| Brand | Raymarine |
| Model Name | E70634 |
| Screen Size | 7 Inches |
| Display Type | LCD, IPS Technology |
| Touch Screen Type | Capacitive |
| Control Method | Touch |
| Connectivity Technology | Bluetooth |
| Map Type | Raster, Vector (Navionics, C-MAP, Raymarine LightHouse Charts) |
| Supported Satellite Navigation System | GPS |
| Item Weight | 2.8 Kilograms |
| Mounting Type | Surface, Trunnion |
| UPC | 723193836873 |
| GTIN | 723193836873 |
Warranty Information
Warranty details for the Raymarine Axiom+ 7 Display are typically provided with the product packaging or can be found on the official Raymarine website. Please refer to these resources for specific terms, conditions, and registration procedures.
Customer Support
For further assistance, technical support, or to access additional documentation, please visit the official Raymarine website:
You may also find FAQs and community forums on their support pages.