RPNB Deluxe Digital Keypad Safe Box (Model RP25ESA) - User Manual

1. Introduction

This manual provides essential instructions for the proper setup, operation, and maintenance of your RPNB Deluxe Digital Keypad Safe Box, Model RP25ESA. This safe is designed to provide secure storage for valuables such as documents, jewelry, cash, and other personal items in home, office, or business environments. Please read this manual thoroughly before using the safe to ensure correct functionality and to maximize its security features.

Image: The RPNB Deluxe Digital Keypad Safe Box with its door open, revealing a camera and stacked documents stored within.

2. Safety Information

• Do Not Store Backup Keys Inside: Never store the backup keys inside the safe. In case of battery failure or forgotten code, the keys are the only way to access the safe. Keep them in a secure, separate location.
• Confidentiality of Codes: Keep your digital code confidential and avoid writing it down in easily discoverable places.
• Battery Usage: Use only new, high-quality AA alkaline batteries. Do not mix old and new batteries or different types of batteries. Replace batteries promptly when the low power indicator appears.
• Environmental Conditions: This safe is not water-resistant and should not be exposed to moisture or extreme temperatures. It is also not fireproof.
• Mounting: For enhanced security, always mount the safe using the provided hardware to a wall or floor.

3. Package Contents

Verify that all components are present in the package:

• RPNB Deluxe Digital Keypad Safe Box (Model RP25ESA)
• Backup Keys (2)
• Mounting Hardware (4 anchor bolts)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the main components of your RPNB safe:

Image: A diagram illustrating the key features of the RPNB safe, including the door knob, digital keypad, indicator lights, and internal components like the removable shelf and living bolts.

1. Door Knob: Used to open and close the safe door.
2. Lock Cover: Conceals the backup keyhole.
3. Digital Keypad: For entering your personal code.
4. Indicator Light: Displays the safe's status (Red: Warning, Green: Correct, Yellow: Low Power).
5. Confirming Button: Used to confirm your entered passcode.
6. Silence Button: Toggles the audible sound of the keypad.
7. Removable Shelf: Allows for flexible storage space configuration.
8. Living Bolts: Two solid steel locking bolts provide enhanced security.

5. Setup

5.1. Battery Installation

1. Locate the battery compartment on the inside of the safe door.
2. Insert 4 new AA alkaline batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover.

5.2. Initial Opening (Using Backup Key)

The safe is shipped in a locked state. Use the backup key for the first opening:

1. Gently remove the lock cover located to the left of the keypad to reveal the keyhole.
2. Insert one of the backup keys into the keyhole and turn it clockwise.
3. While the key is turned, rotate the door knob clockwise to open the safe door.
4. Remove the key and replace the lock cover.

5.3. Setting Your Personal Digital Code

You can program a digital code between 3 and 8 digits long.

1. With the safe door open, locate the red reset button on the inside of the door, near the hinge.
2. Press the red reset button. The indicator light on the keypad will flash yellow, indicating it's ready for programming.
3. Enter your desired 3 to 8 digit code on the keypad.
4. Press the 'Confirming Button' (usually marked with a checkmark or 'E') to save the code. The indicator light will flash green, confirming successful programming. If it flashes red, the programming failed, and you should repeat the steps.
5. Test the new code: With the door still open, enter your new code and press the 'Confirming Button'. The green light should illuminate, and you should be able to turn the door knob.

5.4. Mounting the Safe

For optimal security, it is recommended to mount the safe to a solid surface.

1. Choose a suitable location for mounting (e.g., inside a closet, on a shelf, or to the floor).
2. Use the pre-drilled holes on the back or bottom of the safe as a template to mark drilling points on your chosen surface.
3. Drill pilot holes into the surface.
4. Align the safe with the drilled holes and secure it using the provided anchor bolts. Ensure the safe is firmly attached.

6. Operating Instructions

6.1. Opening the Safe with Digital Code

Image: A visual guide demonstrating how to open the safe using either the backup key or a programmed digital password, both requiring a clockwise turn of the door knob.

1. Enter your 3 to 8 digit personal code on the digital keypad.
2. Press the 'Confirming Button'.
3. If the code is correct, the green indicator light will illuminate. Within 5 seconds, rotate the door knob clockwise to open the safe.
4. If the code is incorrect, the red indicator light will flash, and the safe will remain locked.

6.2. Opening the Safe with Backup Key

This method is used if you forget your code or if the batteries are depleted.

1. Gently remove the lock cover to expose the keyhole.
2. Insert the backup key and turn it clockwise.
3. While the key is turned, rotate the door knob clockwise to open the safe door.
4. Remove the key.

6.3. Closing and Locking the Safe

1. Close the safe door firmly.
2. Rotate the door knob counter-clockwise until it stops. This engages the locking bolts.

6.4. Indicator Lights

Image: The RPNB safe's digital keypad with an explanation of the indicator light colors: Red for warning, Green for correct operation, and Yellow for low power.

• Green Light: Indicates correct code entry or successful programming.
• Red Light: Indicates incorrect code entry or a warning state.
• Yellow Light: Indicates low battery power. Replace batteries immediately.

6.5. Silence Mode

To silence the keypad beeps, press the 'Silence Button' (often marked with a speaker icon) on the keypad. Press it again to re-enable the sound.

7. Maintenance

7.1. Battery Replacement

When the yellow indicator light flashes, it's time to replace the batteries. Always replace all 4 AA batteries at once with new, high-quality alkaline batteries.

7.2. Cleaning

Wipe the exterior of the safe with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

8. Troubleshooting

9. Specifications

Image: A visual representation of the RPNB safe's exterior dimensions, measuring 9.84 inches in height, 13.78 inches in width, and 9.84 inches in depth.

10. Warranty & Support

For any questions, difficulties, or warranty inquiries regarding your RPNB Deluxe Digital Keypad Safe Box, please contact RPNB customer support. Refer to the product packaging or the RPNB official website for the most current contact information.

RPNB is committed to providing assistance and ensuring your satisfaction with their products.