1. Introduction
This instruction manual provides important information for the safe and efficient use of your Lorex 12V DC Power Adapter (Model: ACCPWR12V1). This power supply is designed to provide reliable power to a single Lorex wired security camera with a power consumption rating below 1.0 Amp. Please read this manual thoroughly before installation and operation.
2. Safety Information
- Ensure the power adapter is used with compatible Lorex wired security cameras only.
- Do not expose the adapter to moisture, rain, or extreme temperatures.
- Avoid using the adapter if the cable or plug is damaged.
- Do not attempt to open or modify the power adapter. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Always disconnect the power adapter from the power outlet before cleaning or if it will not be used for an extended period.
3. Package Contents
The package contains the following item:
- Lorex 12V DC Power Adapter (ACCPWR12V1)
4. Setup
- Verify Compatibility: Ensure your Lorex wired security camera requires a 12V DC power supply and has a current consumption below 1.0 Amp.
- Connect to Camera: Insert the DC barrel connector of the power adapter into the power input port of your Lorex security camera. Ensure a secure connection.
- Connect to Power Outlet: Plug the AC prongs of the power adapter into a standard 100-240V AC wall outlet.
- Power On: Once connected, your security camera should power on. Refer to your camera's specific manual for further setup or indicator lights.
Figure 1: Lorex 12V DC Power Adapter (ACCPWR12V1) showing the main unit with AC prongs and the attached DC power cable.
Figure 2: Close-up view of the DC barrel connector, which plugs into the security camera's power input.
5. Operating Instructions
The Lorex 12V DC Power Adapter is a simple plug-and-play device. Once connected correctly to a compatible Lorex wired security camera and a power outlet, it will continuously supply the necessary power for the camera's operation. No further user interaction is required for its basic function.
- Ensure the power adapter is always plugged into a functional power outlet.
- Do not overload the power adapter by connecting it to devices that exceed its specified current rating (1.0 Amp).
- For optimal performance, use the adapter in a well-ventilated area.
6. Maintenance
- Cleaning: Disconnect the power adapter from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Storage: If storing the adapter for an extended period, disconnect it from both the power outlet and the camera. Store it in a cool, dry place, away from direct sunlight and moisture.
- Inspection: Periodically inspect the power cord and adapter housing for any signs of damage, such as cuts, fraying, or cracks. If damage is found, discontinue use and replace the adapter.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on. |
|
|
| Adapter feels hot. |
|
|
8. Specifications
- Model Number: ACCPWR12V1
- Input Voltage: 100-240V AC (Standard Wall Outlet)
- Output Voltage: 12 Volts DC
- Current Rating: 1 Amp
- Wattage: 30 watts
- Product Dimensions: 4 x 3 x 2 inches
- Item Weight: 3.17 ounces
- Color: Black
- Connector Type: DC Barrel Connector
- Compatible Devices: Lorex Wired Security Cameras (below 1 Amp)
9. Warranty Information
For detailed warranty information regarding the Lorex 12V DC Power Adapter (ACCPWR12V1), please refer to the official Lorex website or the warranty card included with your original product purchase. Warranty terms and conditions may vary by region and product.
10. Support
If you require technical assistance or have questions about your Lorex 12V DC Power Adapter, please visit the official Lorex support website or contact their customer service.
Lorex Support Website: www.lorex.com/support