JEKCA Cat 02S-M01 Tabby Cat Plastic Building Blocks Instruction Manual

1. Introduction

Thank you for choosing the JEKCA Cat 02S-M01 Tabby Cat Plastic Building Blocks. This product allows you to construct a detailed and sturdy sculpture of an orange tabby cat using our unique interlocking brick-through system. Designed for enthusiasts aged 14 and above, this set provides a rewarding building experience, culminating in a beautiful display piece.

Image: A fully assembled JEKCA Orange Tabby Cat sculpture, showcasing its intricate brick design and vibrant colors.

2. Safety Information

Please read all safety information before beginning assembly.

• Small Parts Hazard: This product contains small parts and is not suitable for children under 14 years of age due to choking hazards. Keep all components away from young children and pets.
• Adult Supervision: While designed for ages 14+, adult supervision is recommended during assembly, especially for younger builders.
• Proper Tool Use: Use the provided pin driver carefully. Do not apply excessive force.
• Storage: Store unbuilt components and the finished sculpture in a safe place to prevent loss or damage.

3. What's in the Box

Verify that all components are present before starting assembly:

• Instruction Manual
• Bricks (over 1800 pieces)
• Pins
• Pin Driver
• Quick Guide

If any parts are missing or damaged, please contact JEKCA customer support.

4. Setup and Assembly

The JEKCA building blocks utilize a unique "Brick-through Interlocking System" for enhanced stability and durability. Follow the steps below carefully.

4.1 Understanding the Interlocking System

Unlike traditional building blocks, JEKCA uses pins that pass through the bricks to secure them firmly. This creates a robust and stable structure.

Image: A visual representation of the JEKCA interlocking system, showing how pins are inserted and rotated to lock bricks together, ensuring a sturdy and aesthetic build.

4.2 Assembly Steps

1. Preparation: Unpack all components and organize the bricks by color and shape as indicated in the detailed building manual. Ensure you have a clean, flat workspace.
2. Follow the Manual: Refer to the included detailed building manual for step-by-step instructions. Each step will show which bricks to use and where to place them.
3. Insert Pins: After placing a layer of bricks, insert the appropriate pins through the designated holes. The pins will pass through multiple layers of bricks, securing them together.
4. Lock Pins: Use the provided pin driver to rotate the pins 90 degrees to lock them into place. This action expands the pin within the bricks, creating a strong bond.
5. Layer by Layer: Continue building layer by layer, carefully following the manual and ensuring each pin is properly inserted and locked.
6. Attention to Detail: Pay close attention to the orientation of each brick and pin. Incorrect placement may affect the stability and appearance of the final sculpture.

For a visual guide on the building process and the interlocking system, please watch the official JEKCA Building Blocks video:

5. Operating (Display and Handling)

Once assembled, your JEKCA Tabby Cat sculpture is a sturdy display piece. While designed to be robust, proper handling will ensure its longevity.

• Display Location: Place the sculpture on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.
• Handling: When moving the sculpture, support it from the base to prevent stress on individual sections. Avoid dropping or applying excessive force.
• Not a Toy: This product is a collectible sculpture, not a toy. It is not intended for rough play.

6. Maintenance

To keep your JEKCA sculpture looking its best, follow these simple maintenance guidelines:

• Cleaning: Dust regularly with a soft, dry cloth or a soft-bristled brush. For stubborn dirt, lightly dampen the cloth with water (do not use harsh chemicals or abrasive cleaners).
• Avoid Liquids: Do not submerge the sculpture in water or expose it to excessive moisture.
• Repairs: If a brick becomes loose, carefully re-insert and re-lock the corresponding pin using the pin driver.

7. Troubleshooting

Here are solutions to common issues you might encounter:

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or technical support, please contact JEKCA directly.

JEKCA Customer Support:

• Website: Visit the JEKCA Store on Amazon
• For specific inquiries, please refer to the contact information provided on the JEKCA official website or within the product packaging.

Please retain your purchase receipt as proof of purchase for any warranty claims.