Introduction
This manual provides essential instructions for the safe and effective operation of your Berrcom No-Contact Infrared Forehead Thermometer, Model JXB/178. Designed for convenience and hygiene, this device allows for quick and accurate temperature measurements without physical contact, making it suitable for infants, children, and adults. Please read this manual thoroughly before use and retain it for future reference.
Product Overview
Key Features
- Non-Contact Measurement: Measures temperature from a distance, ensuring hygiene and comfort.
- Multi-Mode Functionality: Offers Body, Room, and Surface temperature measurement modes.
- Quick Readings: Provides temperature results in approximately one second.
- Fever Alarm: Visual and audible alerts for elevated temperatures.
- Memory Recall: Stores up to 32 previous readings for tracking temperature changes.
- Color-Coded Display: Screen backlight changes color to indicate temperature status (Green for normal, Orange for slightly high, Red for fever).
- Automatic Shut-off: Conserves battery power by turning off after 30 seconds of inactivity.
Components and Controls
Familiarize yourself with the various parts of your thermometer:
Image 1: Labeled diagram of the Berrcom JXB/178 thermometer, indicating the Display, Mode Key, Broadcast Key, Memory Key, Infrared Sensor, Power Button, and Battery Bay.
- Display: Shows temperature readings, mode, and other indicators.
- Mode Key: Used to switch between Body, Room, and Surface temperature measurement modes.
- Broadcast Key: Toggles the audible beeping sound on or off.
- Memory Key: Accesses stored temperature readings.
- Infrared Sensor: Detects infrared energy to measure temperature.
- Power Button: Activates the device and initiates temperature measurement.
- Battery Bay: Houses the AA batteries.
Setup
Battery Installation
The Berrcom JXB/178 thermometer requires two AA batteries (not included). Follow these steps to install them:
- Locate the battery bay cover at the bottom of the thermometer handle.
- Gently slide or pull the battery cover open.
- Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Close the battery bay cover securely until it clicks into place.
The thermometer is now ready for use. It is recommended to allow the thermometer to acclimate to the room temperature for at least 10 minutes before first use or after significant temperature changes.
Operating Instructions
Taking a Temperature Measurement (Body Mode)
- Press the Power Button to turn on the thermometer. The display will show all segments briefly, then indicate the last measurement or '---'.
- Ensure the thermometer is in Body Mode. If not, press the Mode Key repeatedly until 'Body' or a similar indicator appears on the display.
- Position the thermometer approximately 1 to 2 inches (3-5 cm) from the center of the forehead, avoiding direct contact with skin or hair.
- Press the Power Button again to take a reading. A beep will sound (if not muted), and the temperature will be displayed instantly.
- Observe the display color: Green indicates a normal temperature, Orange indicates a slightly elevated temperature, and Red indicates a fever.
Measuring Room or Surface Temperature
- Turn on the thermometer by pressing the Power Button.
- Press the Mode Key repeatedly to cycle through the modes until 'Room' or 'Surface Temp' appears on the display.
- Point the infrared sensor towards the object or area you wish to measure.
- Press the Power Button to take the reading. The temperature will be displayed.
Mute/Unmute Function
To mute or unmute the thermometer's beeping sound:
- With the thermometer on, press the Broadcast Key (middle button).
- The display will show 'OFF' or 'ON' for the sound, indicating its current status. This is useful for taking temperatures without disturbing a sleeping child.
Memory Recall
To view previous temperature readings:
- With the thermometer on, press the Memory Key (rightmost button).
- Each press will cycle through the stored readings, displaying them in chronological order from most recent to oldest. The thermometer can store up to 32 readings.
Maintenance
Cleaning the Thermometer
To ensure accurate readings and prolong the life of your thermometer, regular cleaning is recommended:
- Wipe the thermometer body with a soft, slightly damp cloth.
- For the infrared sensor, use a cotton swab lightly moistened with alcohol. Gently wipe the sensor area.
- Do not immerse the thermometer in water or any cleaning solutions.
- Avoid using abrasive cleaners or harsh chemicals.
Storage
Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Thermometer does not turn on. | Low or depleted batteries; incorrectly inserted batteries. | Replace batteries with new AA batteries, ensuring correct polarity. |
| Inaccurate or inconsistent readings. | Improper measurement distance; sensor is dirty; rapid temperature changes in environment; thermometer not acclimated. | Ensure correct measurement distance (1-2 inches); clean the infrared sensor; allow thermometer to acclimate to room temperature for 10-15 minutes; avoid taking measurements in drafts or direct sunlight. |
| Display shows 'HI' or 'LO'. | Temperature is outside the measurable range. | Ensure the measurement is within the specified operating range (e.g., 35-38°C for body temperature). |
| Red display and alarm sound. | Indicates a detected fever (elevated body temperature). | Consult a medical professional if a fever is detected. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Berrcom |
| Model Name | JXB/178 |
| Special Feature | Non-Contact |
| Display Type | Digital |
| Connectivity Technology | Infrared |
| Power Source | Battery Powered (2x AA batteries) |
| Age Range (Description) | Infant, Kids, Adult |
| Upper Temperature Rating | 38 Degrees Celsius (Body Mode) |
| Lower Temperature Rating | 35 Degrees Celsius (Body Mode) |
| Reusability | Reusable |
| Product Care Instructions | Wipe Clean |
| Outer Material | Plastic |
| Included Components | Thermometer, Crystal Flash Sales Fiber Cloth |
| Certifications | ANSI, ASME, ASTM, CCC, CE, CSA, EMC, ETL, FCC, FDA, FE, HACCP, ISO 13485, ISO 9000, ISO 9001, NIST, NSF, RoHS, UL, WEEE |
Warranty Information
This Berrcom product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for any warranty claims.
Customer Support
For technical assistance, troubleshooting, or product inquiries, please contact Berrcom customer support. Contact details can typically be found on the product packaging or the official Berrcom website. When contacting support, please have your product model number (JXB/178) and purchase information ready.
