1. Introduction
Thank you for choosing the Kidzone 6V Electric Bumper Car. This manual provides essential information for the safe assembly, operation, and maintenance of your product. Please read it thoroughly before use and retain it for future reference.

Image: The Kidzone 6V Electric Bumper Car in pink, featuring dual joysticks, a control panel, and a surrounding LED light strip.
2. Important Safety Information
To ensure safe operation and prevent injury, please adhere to the following guidelines:
- Age Suitability: Suitable for ages 18 months to 8 years.
- Maximum Weight: The maximum user weight is 66 lbs (30 kg).
- Fire Hazard: Keep the product away from fire and high heat sources.
- Adult Supervision: Adult supervision is required at all times to reduce the risk of injury.
- Prohibited Areas: Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools, or other bodies of water.
- Protective Gear: Always wear protective clothing and shoes during operation.
- Single Rider: Never allow more than one rider at a time.
- Seat Belt: Always ensure the seat belt is securely fastened before operation.
3. Package Contents
Verify that all components are present upon unpacking:
- Kidzone 6V Electric Bumper Car
- Remote Control
- Charger
- DIY Number Stickers (4 sheets)
- Instruction Manual
Video: A quick demonstration and unboxing of the Kidzone Bumper Car, showing the main unit, remote control, charger, and sticker sheets.
4. Setup and Assembly
The Kidzone Bumper Car requires minimal assembly. Follow these steps:
- Battery Connection: Locate the battery compartment, usually under the seat. Connect the battery wire as instructed. Ensure a secure connection.
- Seat Installation: Secure the seat cover back into place using the provided screws.
- Remote Control Batteries: Install two AAA batteries (not included) into the remote control.
- Apply Stickers: Customize your bumper car with the included DIY number stickers.

Image: The pink Kidzone Bumper Car displayed with four sheets of number stickers, allowing for personalization.
5. Charging the Battery
For optimal performance, fully charge the battery before first use and after each play session.
- Charging Port: The charging port is located on the control panel, usually beneath the power button.
- Initial Charge: For the very first charge, allow 4-5 hours.
- Subsequent Charges: Subsequent charges typically take 8-12 hours.
- Charger Indicator: The charger will typically have an indicator light that changes color (e.g., red to green) when fully charged.
A full charge provides approximately 1-2 hours of riding fun.
6. Operating Instructions
The bumper car offers two driving modes: manual operation and remote control.
6.1. Manual Operation (for children 3+ years)
- Power On: Press the red power button on the control panel.
- Driving: Use the two joysticks to control movement. Pushing both forward moves the car forward, pulling both back moves it backward. Pushing one forward and one back allows for spinning.
- LED Lights: Press the light button on the control panel to activate or deactivate the colorful LED lights.

Image: The Kidzone Bumper Car highlighting its 360-degree spin capability and soft bumper for safe play.
6.2. Remote Control Operation (for children 1.5-3 years)
For younger children (1.5-3 years), parental remote control is recommended for enhanced safety and guidance.
- Pairing: Ensure the remote control is paired with the bumper car according to the remote's instructions (usually involves holding a button on the remote while turning on the car).
- Controls: Use the directional buttons on the remote to control the car's movement (forward, backward, left, right, spin).

Image: A pair of hands holding the blue remote control, demonstrating its use for guiding the bumper car.
Video: A demonstration of the Kidzone Bumper Car's features, including its lights, controls, and remote operation.
7. Maintenance
Regular maintenance ensures the longevity and safe operation of your bumper car.
- Cleaning: Wipe the car with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Battery Care: Always fully charge the battery after each use. If storing for an extended period, charge the battery every 30 days to maintain its health.
- Storage: Store the bumper car in a dry, cool place away from direct sunlight and moisture.
- Inspection: Periodically check for loose screws, damaged wires, or worn parts. Contact customer support for replacement parts if needed.
8. Troubleshooting
If you encounter issues, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move | Battery not charged or disconnected. | Ensure battery is fully charged and securely connected. Check power button is ON. |
| Remote control not working | Remote batteries low or not paired. | Replace AAA batteries in remote. Re-pair remote with car (refer to remote manual). |
| Lights not working | Light switch OFF or power OFF. | Ensure the light switch is ON and the main power is ON. |
9. Specifications
- Product Dimensions: 28.35 x 28.35 x 16.93 inches
- Item Weight: 19.8 pounds
- Recommended Age: 18 months - 8 years
- Maximum User Weight: 66 lbs (30 kg)
- Battery: 6V Rechargeable
- Charge Time: 4-5 hours (first charge), 8-12 hours (subsequent charges)
- Run Time: 1-2 hours
- Safety Certification: ASTM Certified
- Features: 360-degree spin, LED lights, Remote Control, DIY stickers, Soft Bumper

Image: Visual representation of the Kidzone Bumper Car's recommended age and weight capacity, showing a child comfortably seated.
10. Warranty and Support
For warranty information, replacement parts, or technical support, please contact Kidzone customer service. Refer to the product packaging or the official Kidzone website for contact details.
Website: Visit the Kidzone Store





