LifePlus Commercial Ice Maker Machine User Manual

1. Introduction

Thank you for choosing the LifePlus Commercial Ice Maker Machine. This appliance is designed for efficient and reliable ice production, capable of producing up to 100 pounds of ice per day with a large storage bin. It features a stainless steel construction, a two-way water supply system, and is suitable for various settings including home, parties, shops, offices, and bars. This manual provides essential information for the safe and proper installation, operation, and maintenance of your ice maker.

Figure 1: LifePlus Commercial Ice Maker Machine

2. Safety Instructions

• Initial Setup: Allow the ice maker to stand upright for at least 24 hours before its first use. This allows the refrigerant to settle properly, preventing potential damage to the compressor.
• Water Hardness: The factory default setting for this product is "tap water iron mode." If using pure water, it is necessary to adjust the water hardness setting to 0 to ensure optimal performance and prevent issues.
• Cleaning: Before cleaning the internal components, always cut off the tap water source. Then, open the ball valve in the ice bucket to drain any remaining water. Failure to do so may result in water not entering the machine correctly after cleaning.
• Water Supply Valve: Ensure the ball valve in the ice bucket is turned off before using tap water to prevent overflow.
• Placement: Do not place the ice maker in direct sunlight or near heat sources. Ensure adequate ventilation around the unit.
• Electrical Safety: Ensure the power supply matches the specifications of the machine (110 Volts AC, 120 watts). Do not use damaged power cords or plugs.

Figure 2: Control panel and interior view of the ice maker.

3. Package Contents

Upon unpacking, please verify that all the following items are included:

• 1 x Commercial Ice Maker Machine
• 1 x Water Supply Hose (60 inch) with connector
• 1 x Water Drain Hose (35 inch)
• 1 x PTFE Thread Seal Tape
• 1 x Ice Scoop
• 5 x Ice Bags
• 1 x Instruction Manual (this document)

Figure 3: The ice maker machine and its accessories, including the ice scoop and ice bags.

4. Setup

1. Placement: Position the ice maker on a stable, level surface. Ensure there is sufficient clearance around the unit for proper ventilation.
2. Initial Stand Time: After unboxing, allow the machine to stand upright for 24 hours before plugging it in or operating it. This is crucial for the compressor's longevity.
3. Water Supply Connection: The ice maker supports two water supply methods:
   • Direct Water Line: Connect the provided 60-inch water supply hose to a potable water source using the connector.
   • Bucket Water Supply: Alternatively, the machine can be supplied with water from a bucket. Ensure the bucket is positioned correctly to allow water inflow.
   

   Figure 4: Water supply and drainage connections.
4. Water Drainage Connection: Connect the 35-inch water drain hose. This can be set up for gravity drain or connected to a tank for collection. Ensure proper drainage to prevent water accumulation.
5. Power Connection: Plug the ice maker into a grounded electrical outlet that matches the specified voltage (110 Volts AC).

5. Operating Instructions

5.1 Ice Making Process

The LifePlus ice maker features a fast and efficient ice production cycle, producing 45 trays per batch within 10-26 minutes, with a daily capacity of 100 pounds.

1. Power On: Press the power button on the LED display panel to turn on the machine.
2. Water Inflow: The machine will automatically initiate water inflow.
3. Refrigeration: The refrigeration compressor will begin the ice-making process.
4. Ice Harvest: Once ice cubes are formed, they will be released into the storage bin. The machine will automatically stop ice production when the bin is full.

Figure 5: Automatic ice production cycle.

5.2 Adjustable Ice Cube Thickness

The ice maker allows for 3-level adjustable ice cube thickness. Use the UP button on the control panel to adjust the ice-making time, which directly controls the thickness of the ice cubes. Longer times results in thicker ice cubes.

• Thin Ice: Ideal for salads or quick chilling.
• Medium Ice: Suitable for cold drinks.
• Thick Ice: Best for wine cooling or applications requiring slower melting.

Figure 6: Ice cube thickness adjustment and applications.

5.3 24-Hour Timer Function

Utilize the 24-hour timer function to schedule ice production. This allows you to have a full basket of ice cubes ready at a specific time, such as the start of your business day.

Figure 7: The 24-hour timer allows for scheduled ice production.

6. Maintenance

• Auto-Clean Function: The ice maker is equipped with a one-key auto-clean function. Regularly use this feature to maintain hygiene and optimal performance.
• Blue UV Light: The built-in blue UV light helps create a clean and hygienic ice bin environment, contributing to food-grade ice cubes.
• Exterior Cleaning: Clean the stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners.
• Internal Cleaning: Periodically clean the internal water reservoir and ice-making components as per the auto-clean function or manual instructions if provided.
• Heat Insulation: The thickened foam layer provides consistent low temperature for long-term ice storage, reducing melting and saving energy.

Figure 8: Internal construction highlighting insulation and stainless steel.

7. Troubleshooting

This section provides general guidance for common issues. For more complex problems, please contact customer support.

8. Specifications

Figure 9: Product dimensions.

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your LifePlus Commercial Ice Maker Machine, please contact LifePlus customer service. Refer to the contact information provided with your purchase or visit the official LifePlus website.

You can also visit the LifePlus Store on Amazon for more information and support resources.