Bayer Design Cosatto Wonder Doll Stroller User Manual

1. Introduction

Thank you for choosing the Bayer Design Cosatto Wonder Doll Stroller. This modern, convertible doll pram is designed to provide hours of imaginative play for children aged 3 years and up. It features an adjustable handlebar, a reversible bassinet that transforms into a seat, and convenient folding for storage and transport.

Safety Warning: This product contains small parts and poses a choking hazard. Not suitable for children under 3 years without adult supervision. Always ensure all parts are securely assembled before use.

2. Product Features

• Modern Combi Doll Stroller: Designed with a trendy aesthetic, suitable for dolls up to 52 cm (approximately 20.5 inches).
• Adjustable Handlebar: The handlebar can be adjusted in height from 62 cm to 79 cm (approximately 24.4 to 31.1 inches) to accommodate children of different heights.
• Reversible Bassinet/Seat Unit: The bassinet can be easily positioned to face the child or face outwards. It also transforms into a stroller seat.
• Reversible Handle: The handle can be quickly moved from one side to the other, allowing the doll to face the child or face outwards without re-positioning the bassinet/seat unit.
• Protective Canopy: The bassinet canopy provides protection for the doll from sun or wind in both lying and sitting positions.
• Multi-directional Wheels: Equipped with swivel front wheels for easy maneuverability and smooth navigation.
• Foldable Design: The stroller can be easily folded for compact storage and convenient transport.
• Included Accessories: Comes with a shoulder bag with a zipper closure, which can be used as a shoulder bag (long strap) or a handbag (two short straps), and an integrated basket for additional storage.

3. Package Contents

Please check the package contents carefully upon opening. If any parts are missing or damaged, please contact customer support.

• Bayer Design Cosatto Wonder Doll Stroller Frame
• Convertible Bassinet/Seat Unit
• Shoulder Bag
• Integrated Storage Basket (pre-attached or separate)
• Instruction Manual (this document)

4. Setup and Assembly

Assembly is required for this product. Please follow these steps carefully. Adult supervision is recommended during assembly.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface.
2. Attach Wheels: Locate the wheels and attach them to the designated axles on the stroller frame. Ensure they click securely into place. (Specific mechanism may vary, refer to visual guides if provided with physical product.)
3. Unfold Frame: Grasp the handlebar and gently pull upwards until the stroller frame locks into its open position. Listen for a click to confirm it is securely locked.
4. Attach Bassinet/Seat Unit: Align the connectors on the bottom of the bassinet/seat unit with the corresponding slots on the stroller frame. Press down firmly until it clicks into place. Ensure it is stable and does not wobble.
5. Adjust Handlebar: Adjust the handlebar to the desired height by pressing the adjustment buttons (usually located on the sides of the handlebar) and sliding the handle up or down. Release the buttons to lock it in place.
6. Attach Shoulder Bag: The shoulder bag can be hung on the handlebar using its straps.

5. Operating Instructions

5.1 Adjusting the Handlebar Height

To adjust the height of the handlebar, locate the two buttons on either side of the handlebar joint. Press both buttons simultaneously and slide the handlebar up or down to the desired height. Release the buttons to lock the handlebar securely in position. The handlebar can be adjusted from 62 cm to 79 cm.

5.2 Converting from Bassinet to Seat Unit

The bassinet unit can be transformed into a stroller seat. Locate the snap buttons or adjustment levers on the sides of the bassinet. Release these mechanisms and adjust the angle of the bassinet base and backrest until it forms a seated position. Secure all snaps or levers to lock the seat in place.

5.3 Reversing the Bassinet/Seat Unit Direction

The bassinet/seat unit can be easily reversed to face the child or face outwards. To do this, locate the release buttons or levers on the sides of the unit where it connects to the frame. Press these buttons/levers, lift the unit, rotate it 180 degrees, and re-attach it to the frame until it clicks securely into place.

5.4 Using the Reversible Handle Feature

Instead of detaching and re-attaching the bassinet/seat unit, you can simply reverse the handle. Push the handle over the top of the bassinet/seat unit to the opposite side. This allows the doll to face the child or face outwards without removing the unit from the frame.

5.5 Folding for Transport and Storage

To fold the stroller for transport or storage, ensure the bassinet/seat unit is in a flat or compact position if applicable. Locate the folding mechanisms (usually levers or buttons on the frame near the handlebar or sides). Activate these mechanisms and push the handlebar downwards, allowing the frame to collapse. Secure any locking clips to keep the stroller folded.

6. Maintenance

• Cleaning: Wipe down the plastic and metal parts of the stroller with a damp cloth and mild soap. Do not use abrasive cleaners. The fabric parts can be spot cleaned with a gentle fabric cleaner. Do not machine wash.
• Storage: Store the stroller in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
• Inspection: Periodically check all screws, bolts, and locking mechanisms to ensure they are tight and secure. Replace any worn or damaged parts immediately.

7. Troubleshooting

8. Specifications

9. Safety Information

• Always supervise children during play with this product.
• Ensure all assembly steps are completed correctly and all locking mechanisms are engaged before allowing a child to play with the stroller.
• Regularly inspect the stroller for any loose, broken, or damaged parts. Discontinue use if any damage is found and contact customer support for replacement parts or repair instructions.
• Keep small parts away from young children to prevent choking hazards.
• Do not allow children to climb on or stand in the stroller.
• This product is a toy and is not intended for carrying real infants or pets.
• Keep packaging materials (plastic bags, ties, etc.) away from children to avoid suffocation risks.

10. Warranty and Support

Bayer Design stands behind the quality of its products. For any questions, concerns, or issues regarding your Cosatto Wonder Doll Stroller, please contact Bayer Design customer support. Please have your model number (18404AA) and purchase information ready when contacting support.

While specific warranty details may vary by region and retailer, Bayer Design products are typically covered against manufacturing defects. Please refer to your purchase receipt or the retailer's policy for specific warranty terms.

For further assistance, please visit the official Bayer Design website or contact their customer service department.

Note: Information regarding spare parts availability is not provided in the product details.