Monoprice 139786

Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord User Manual

Model: 139786

Introduction

This manual provides essential information for the safe and effective use of your Monoprice 14AWG NEMA 5-15P to IEC 60320 C13 Power Cord. This power cord is designed to connect devices with an IEC 60320 C14 panel connector, such as PCs, monitors, scanners, and printers, to a standard North American AC wall outlet. Its 14AWG construction ensures robust power delivery for demanding applications.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

Setup

Follow these steps to properly set up your Monoprice power cord:

  1. Identify connectors: Locate the NEMA 5-15P (standard 3-prong wall plug) and the IEC 60320 C13 (female connector for devices) ends of the power cord.
  2. Connect to device: Insert the IEC 60320 C13 connector into the corresponding male IEC 60320 C14 inlet on your device (e.g., computer power supply, monitor). Ensure a firm connection.
  3. Connect to power source: Plug the NEMA 5-15P end of the power cord into a standard, grounded North American AC wall outlet, UPS, or other compatible AC power source.
Monoprice 3-Prong Power Cord with NEMA 5-15P plug and IEC 60320 C13 connector
Image: The Monoprice 3-Prong Power Cord, featuring the NEMA 5-15P plug and IEC 60320 C13 connector. This image illustrates the overall design and robust construction of the cable.

For a visual comparison of the cable's thickness and quality, please refer to the video below:

Video: This video demonstrates the significant thickness difference between the Monoprice 14AWG power cable and a standard power supply cable, highlighting the superior gauge for enhanced safety and power handling.

Operating Instructions

Once properly connected, the Monoprice power cord will supply power to your device. No further operational steps are required for the cord itself. Ensure your device's power switch is in the 'On' position if applicable.

Maintenance

To ensure the longevity and safe operation of your power cord, follow these maintenance guidelines:

Troubleshooting

If you encounter issues with your power cord, refer to the following table:

ProblemPossible CauseSolution
Device not receiving powerLoose connectionEnsure both ends of the power cord are fully inserted.
Device not receiving powerPower outlet issueTest the outlet with another device or check the circuit breaker.
Device not receiving powerDamaged power cordInspect the cord for damage. Replace if necessary.
Cord feels warmOverload or poor ventilationReduce the load on the circuit or ensure adequate airflow around the cord. If the cord is excessively hot, discontinue use immediately.

Specifications

FeatureDetail
Connector 1NEMA 5-15P (Male, Grounded)
Connector 2IEC 60320 C13 (Female)
Wire Gauge14 AWG
Current Rating15 Amps (Max)
Voltage Rating125V
Jacket TypeSJT (Service Junior Thermoplastic)
ColorBlack
Product Dimensions6.5 x 5.5 x 2 inches (packaging)
Item Weight2.88 ounces
Model Number139786
ManufacturerMonoprice

Warranty and Support

Monoprice products are designed for reliability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official Monoprice website. For technical support or further assistance, please contact Monoprice customer service through their official channels.

Related Documents - 139786

Preview Monoprice 35435 Mini SLA Printer Firmware Update Guide
Step-by-step instructions for updating the firmware on the Monoprice 35435 Mini SLA Printer to the latest version.
Preview Monoprice Select Mini 3D Printer User's Manual
Comprehensive user's manual for the Monoprice Select Mini 3D Printer, covering safety guidelines, setup, software installation (Cura, Repetier-Host), operation, and regulatory compliance. Includes detailed instructions for optimal 3D printing.
Preview Monoprice Cable Plate with Flexible Opening, 2-Gang, Black - Quick Installation Guide (P/N 12583)
Step-by-step installation guide for the Monoprice Cable Plate with Flexible Opening (2-Gang, Black, P/N 12583). Learn how to safely install low voltage cables behind your flat panel TV and audio/video devices.
Preview Monoprice 60W Volume Control with A/B Switch Quick Start Guide
Quick start guide for the Monoprice 60W Volume Control with A/B Switch (P/N 38176). This document provides instructions for connecting two amplifiers to a single volume controller, installation, setup, calibration, and technical specifications. It is compatible with amplifiers up to 120 watts and designed for one pair of speakers.
Preview Monoprice Maker Ultimate 2 3D Printer Quick Start Guide
Quick start guide for the Monoprice Maker Ultimate 2 3D Printer (P/N 36045), covering unboxing, setup, menu operation, and first print instructions. Learn about its FFF printing features, package contents, and customer support.
Preview Monoprice Maker Select 3D Printer User Manual
This user manual provides comprehensive instructions for setting up, operating, and maintaining the Monoprice Maker Select 3D Printer (Model 13860), covering features, software, and technical support.