Introduction
This manual provides essential information for the safe and proper installation, operation, and maintenance of your ANZZI Myth Series Frameless Tub Shower Door. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.
Safety Information
- Always wear safety glasses during installation.
- Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges.
- Ensure all mounting surfaces are structurally sound and capable of supporting the weight of the shower door.
- Use appropriate tools and follow all local building and plumbing codes.
- Professional installation is recommended.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer service.
- Tempered Glass Panel (1/4 inch thick)
- Aluminum Rhino Alloy Certified Hardware (Brushed Nickel finish)
- Handle
- Seal Strips
- Mounting Hardware
Setup and Installation
Proper installation is crucial for the functionality and longevity of your shower door. Follow these general steps, referring to the detailed diagrams and instructions provided in the separate installation guide for your specific model.
Image: The ANZZI Myth Series Frameless Tub Shower Door installed over a bathtub, showcasing its design and integration into a modern bathroom setting.
- Prepare the Installation Area: Ensure the bathtub and surrounding walls are clean, level, and free of debris. Mark the desired position for the wall profile.
- Install Wall Profile: Secure the aluminum wall profile to the wall using appropriate fasteners. Ensure it is plumb and securely anchored.
- Attach Hinges to Glass Panel: Carefully attach the Rhino Alloy certified hinges to the tempered glass panel.
- Mount Glass Panel: With assistance, lift and position the glass panel into the wall profile and secure the hinges to the wall profile. Adjust for proper alignment and swing.
- Install Handle: Attach the handle to the glass panel as per the instructions.
- Apply Seal Strips: Install the clear seal strips along the bottom and vertical edges of the glass panel to prevent water leakage.
- Seal Gaps: Apply silicone sealant to all exterior joints between the wall profile, glass, and bathtub for a watertight seal. Allow adequate curing time before use.
Image: Detail of the Rhino Alloy certified hardware, highlighting its robust construction and brushed nickel finish, ensuring durability and stability for the shower door.
Image: A close-up view of the 1/4 inch (6mm) ANSI certified tempered DECO-GLASS, showing its thickness and quality.
Video: This video demonstrates the features of the ANZZI Myth Frameless Tub Door in Brushed Nickel, including its smooth swinging motion and durable construction.
Operating Instructions
Your ANZZI Myth Series Tub Shower Door is designed for smooth and effortless operation. To open the door, gently pull the handle outwards. To close, push the door until it aligns with the bathtub edge, ensuring the seal strips create a watertight barrier. The hinged design allows for a wide swinging motion for easy access.
Video: This video highlights the smooth operation and design of the ANZZI Shower Door in Brushed Nickel, demonstrating its functionality.
Maintenance
Regular cleaning and maintenance will preserve the appearance and functionality of your shower door.
- Glass Cleaning: The ANZZI Myth Series features TSUNAMI GUARD shielding, which repels water and prevents fogging and moisture build-up. For daily cleaning, use a soft cloth and mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that can damage the Tsunami Guard coating.
- Hardware Cleaning: Clean the brushed nickel hardware with a soft, damp cloth. Do not use abrasive cleaners, ammonia-based products, or scouring pads, as these can scratch or dull the finish.
- Seal Strips: Periodically inspect the seal strips for wear or damage. Replace them if they become discolored, cracked, or lose their sealing effectiveness to prevent leaks.
Image: A visual comparison demonstrating the effectiveness of ANZZI's TSUNAMI GUARD water repellent shield on the glass, showing water beading and rolling off.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water leakage | Damaged or improperly installed seal strips; insufficient sealant. | Inspect and adjust/replace seal strips. Reapply silicone sealant to all exterior joints. |
| Door does not swing smoothly | Hinges are loose or misaligned; debris in hinge mechanism. | Check hinge screws and adjust alignment. Clean any debris from hinges. |
| Glass appears cloudy or stained | Hard water deposits; improper cleaning agents. | Use a mild, non-abrasive cleaner. For hard water, use a vinegar-based solution specifically designed for glass, then rinse thoroughly. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ANZZI |
| Model Number | SD-AZ053-01BN |
| Dimensions | 58 x 34 inches (Product Dimensions: 0.23 x 28 x 56 inches) |
| Color | Brushed Nickel |
| Material | Tempered Glass, Aluminum Rhino Alloy |
| Glass Thickness | 1/4 inch (6mm) |
| Item Weight | 37 Pounds |
| Assembly Required | Yes |
| UPC | 191042049550 |
Warranty
The ANZZI Myth Series Frameless Tub Shower Door comes with a Peace of Mind Lifetime Warranty. This warranty covers manufacturing defects and ensures the quality and durability of your product. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official ANZZI website.
Support
If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact ANZZI customer support. Refer to your product packaging or the official ANZZI website for the most current contact information.
