Product Overview
The LEPOTEC W10-3 LED Under Cabinet Lights are designed to provide convenient and efficient lighting for various indoor spaces. These wireless lights feature a motion sensor, a rechargeable battery, and magnetic installation for ease of use. They are ideal for illuminating cabinets, closets, kitchens, and other areas where quick, temporary lighting is needed.
Key Features
- USB Rechargeable: Equipped with a 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Provides approximately 8 hours of continuous light or 1-2 months in motion sensor mode (activating 10 times a day).
- 3 Adjustable Modes: Offers Motion Sensing (G mode), Instant On (ON mode), and Instant Off (OFF mode) for versatile lighting control.
- Motion Sensor: In G mode and dark environments, lights automatically sense human motion within a 10ft/120° range and turn off after 20 seconds of no movement.
- Easy Installation: Features a built-in magnet for direct attachment to iron surfaces. Includes iron sheets with double-sided adhesive tape for mounting on non-iron surfaces. Lights can be easily removed for charging or relocation.
- Wide Application: Suitable for bedrooms, baby rooms, closets, cabinets, corridors, workshops, basements, garages, stairwells, and more.
Setup Instructions
1. Charging the Lights
Before first use, fully charge the LED lights. Connect the included USB cable to the light's Micro USB Charging Port and to a USB power source (e.g., computer, wall adapter). The charging indicator light will be red while charging and turn green when fully charged (approximately 3 hours).
Image: Charging indicator showing red for charging and green for full.
2. Installation
The LEPOTEC LED lights offer flexible installation options:
- Direct Magnetic Attachment: If your desired surface is magnetic (e.g., metal cabinet, refrigerator), simply place the light directly onto it. The built-in magnets will hold it securely.
- Adhesive Magnetic Strips: For non-magnetic surfaces (e.g., wood cabinets, walls), use the provided iron sheets with double-sided adhesive tape.
- Clean the target surface thoroughly to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the double-sided adhesive tape and attach it to the iron sheet.
- Peel off the protective film from the other side of the adhesive tape and firmly press the iron sheet onto the desired installation location.
- Attach the LED light to the installed iron sheet. The light can be easily removed from the magnetic strip for recharging or repositioning.
Image: Step-by-step guide for magnetic installation on non-iron surfaces.
Operating Instructions
Mode Selection
Each LEPOTEC LED light features a 3-position switch to select the desired operating mode:
- ON: The light will remain continuously on, regardless of motion or ambient light conditions.
- OFF: The light will remain off.
- G (Motion Sensing Mode): The light will activate based on motion and ambient light conditions.
Image: Detailed view of the light's features, including the mode switch.
Motion Sensor Functionality (G Mode)
In G mode, the light operates as follows:
- Daytime: If the ambient environment is bright, the light will not turn on, even if motion is detected, to conserve battery.
- Nighttime/Dark Environment: If the ambient environment is dark, the light will automatically turn on when human motion is detected within a 10ft/120° range.
- Automatic Shut-off: The light will automatically turn off approximately 20 seconds after no motion is detected.
Image: Visual representation of the motion sensor's operation in different light conditions.
Video: Official seller demonstration of the LED Under Cabinet Lighting with motion sensor functionality.
Maintenance
Battery Recharging
To ensure optimal performance and longevity of your LEPOTEC LED lights, recharge them when the light output appears dim or the motion sensor becomes less responsive. Use the provided USB cable for recharging. The indicator light will guide you on the charging status (red for charging, green for full).
Cleaning
Wipe the surface of the lights with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
Troubleshooting
- Light not turning on in G mode: Ensure the ambient environment is dark enough. The sensor is designed not to activate in bright conditions to save power. Check if the battery needs recharging.
- Light turns off too quickly: In G mode, the light will turn off after 20 seconds of no motion. If you require continuous light, switch to ON mode.
- Short battery life: Ensure the light is fully charged. Frequent activation in high-traffic areas will consume battery faster. Consider switching to OFF mode when not needed for extended periods.
- Light not adhering: Ensure the installation surface is clean, dry, and smooth. Reapply the adhesive magnetic strips if necessary.
Specifications
| Feature | Detail |
|---|---|
| Brand | LEPOTEC |
| Model Number | W10-3 |
| Color | Silver-White Light |
| Material | Aluminum, Plastic |
| Power Source | Battery Powered (1000mAh rechargeable) |
| Light Source | LED (10 LEDs) |
| Light Color | White light (6000 Kelvin) |
| Brightness | 100 Lumen |
| Switch Type | Motion Sensor (3-way switching: ON/OFF/G) |
| Motion Sensor Range | 10ft / 120° |
| Automatic Shut-off | 20 seconds (in G mode, no motion) |
| Mounting Type | Magnetic Mount, Under Cabinet |
| Item Dimensions (L x W x H) | 7.5"L x 1.3"W x 0.5"H |
| Unit Count | 3 Count |
| Service Life | 80,000 hours |
Warranty and Support
LEPOTEC products are designed for durability and long-term performance, offering an estimated service life of 80,000 hours. If you encounter any questions or issues with your LEPOTEC LED lights, please contact our customer support. We are committed to providing assistance, including replacements or refunds, as needed.
For support, please refer to the contact information provided with your purchase or visit the official LEPOTEC store on Amazon: LEPOTEC Store.