Bryton Rider 320 GPS Cyclocomputer User Manual

1. Introduction

The Bryton Rider 320 is a high-performance GPS cyclocomputer designed for cyclists seeking comprehensive ride data. It features a clear 2.3-inch LCD display, long battery life, and support for various sensors to track speed, cadence, and heart rate. This manual provides essential information for setting up, operating, and maintaining your device.

Image: Bryton Rider 320 GPS Cyclocomputer device.

2. What's in the Box

Upon opening your Bryton Rider 320 package, verify that all components are present:

• Bryton Rider 320 GPS Cyclocomputer
• USB Cable (Micro USB)
• Heart Rate Sensor
• Handlebar Mount
• Instruction Manual (this document)

Note: The specific contents may vary slightly depending on the purchased bundle (e.g., "T" bundle includes sensors).

3. Setup

3.1 Device Charging

Before first use, fully charge your Rider 320. Connect the provided Micro USB cable to the device's charging port and plug the other end into a USB power adapter or computer. The device will indicate charging status. A full charge provides approximately 35 hours of battery life.

3.2 Mounting the Device

Attach the handlebar mount to your bicycle's handlebars or stem using the provided O-rings or zip ties. Ensure the mount is secure and positioned for optimal viewing. Align the Rider 320 with the mount and twist it clockwise until it locks into place.

3.3 Sensor Pairing

The Rider 320 supports Bluetooth and ANT+ sensors. To pair a sensor (e.g., heart rate, cadence, speed):

1. Power on your Rider 320.
2. Go to the Settings menu.
3. Select Sensors and then Add Sensor.
4. Activate the sensor (e.g., wear the heart rate strap, spin the crank for cadence).
5. The Rider 320 will scan for available sensors. Select your sensor from the list to pair it.
6. Confirm the pairing.

Note: Ensure sensors are within range and have working batteries.

3.4 Initial Configuration

Upon first power-on or after a factory reset, you will be prompted to set basic preferences:

• Language: Select your preferred language.
• Units: Choose between Metric (km/h, km) or Imperial (mph, miles).
• Time Zone: Set your local time zone.
• User Profile: Enter basic information like age, weight, and height for accurate calorie and training calculations.

3.5 Bryton Active App Connection

The Bryton Active app (available for iOS and Android) enhances your Rider 320 experience. Download the app and create an account. To connect your device:

1. Enable Bluetooth on your smartphone.
2. Open the Bryton Active app and navigate to the device pairing section.
3. On your Rider 320, go to Settings > Bluetooth > Pair with App.
4. Follow the on-screen prompts in the app to complete the pairing process.

The app allows for display customization, firmware updates, and automatic ride data synchronization.

Image: Bryton Rider 320 display showing various data fields.

4. Operating the Device

4.1 Power On/Off

• Power On: Press and hold the power button (usually on the side or bottom) until the Bryton logo appears.
• Power Off: Press and hold the power button until a power-off prompt appears, then confirm.

4.2 Basic Navigation

The Rider 320 typically uses physical buttons for navigation. Refer to the device's button layout for specific functions:

• UP/DOWN buttons: Navigate through menus or change data pages during a ride.
• OK/ENTER button: Confirm selections or start/stop recording.
• BACK/LAP button: Go back in menus or mark a lap during a ride.

4.3 Starting a Ride

1. Ensure the device has acquired a GPS signal (indicated by a solid GPS icon).
2. Press the OK/ENTER button to start recording your ride.
3. During the ride, you can switch between data pages using the UP/DOWN buttons.
4. To pause, press the OK/ENTER button. To resume, press it again.
5. To end and save the ride, press and hold the OK/ENTER button, then confirm saving.

4.4 Display Customization

The Rider 320 allows extensive customization of its data display pages. This can be done directly on the device or more conveniently through the Bryton Active app. You can select which data fields (e.g., speed, distance, heart rate, cadence, power, altitude) appear on each page and the number of fields per page.

4.5 GPS Functionality

The integrated GPS sensor provides accurate tracking of your location, speed, distance, and altitude. For best GPS performance, ensure the device has a clear view of the sky when starting a ride.

4.6 Data Synchronization

After completing a ride, you can synchronize your data to the Bryton Active app via Bluetooth. Once synced to the app, your ride data can be automatically uploaded to third-party platforms like Strava, TrainingPeaks, or Komoot, if configured in the app settings.

5. Maintenance

5.1 Cleaning

Clean the device regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the screen or casing. Ensure the USB port cover is securely closed to maintain its IP54 water resistance rating.

5.2 Battery Care

To maximize battery lifespan:

• Avoid extreme temperatures during charging and storage.
• Do not leave the device fully discharged for extended periods.
• For long-term storage, charge the device to approximately 50-70%.

5.3 Firmware Updates

Bryton periodically releases firmware updates to improve performance, add features, and fix bugs. It is recommended to keep your device's firmware up to date. Updates can typically be performed via the Bryton Active app or by connecting the device to a computer and using Bryton's update tool.

6. Troubleshooting

6.1 GPS Signal Issues

• No Signal: Ensure you are outdoors with a clear view of the sky. Avoid tall buildings or dense tree cover.
• Slow Acquisition: Allow a few minutes for the device to acquire a signal, especially if it's been moved a significant distance since its last use.

6.2 Sensor Connection Problems

• Sensor Not Found: Check if the sensor is active (e.g., spinning the wheel/crank, wearing the heart rate strap). Ensure the sensor's battery is not depleted.
• Interference: Move away from other electronic devices that might cause interference.
• Re-pair: Try unpairing and re-pairing the sensor through the device settings.

6.3 Bryton Active App Sync Issues

• Connection Failure: Ensure Bluetooth is enabled on your phone and the Rider 320. Restart both the device and the app.
• Slow Sync: Data transfer can sometimes be slow. Ensure a stable Bluetooth connection and sufficient battery on both devices.
• Data Loss (Rare): If you experience data loss or persistent sync issues, try updating the device firmware and reinstalling the app. Contact Bryton support if problems persist.

6.4 Device Not Responding

If the device freezes or becomes unresponsive, perform a soft reset by pressing and holding the power button for approximately 10-15 seconds until it powers off. Then, power it back on normally.

7. Specifications

8. Warranty and Support

Bryton products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Bryton website. For technical support, troubleshooting assistance, or service inquiries, please contact Bryton customer support through their official website or authorized service centers.

Official Bryton Website: www.brytonsport.com