1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Merax Full Size Daybed, Model 1, in Espresso finish. This solid wood daybed frame is designed for durability and functionality, offering a comfortable sleeping or lounging area and potential under-bed storage space. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and safe operation.
Figure 1.1: Assembled Merax Full Size Daybed, Espresso.
2. Safety Information
Adhere to the following safety guidelines to prevent injury or damage to the product:
- Ensure all components are securely fastened before use. Periodically check and tighten all connections.
- Do not exceed the recommended weight capacity of 500 lbs.
- Avoid standing or jumping on the daybed frame.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- Assemble the daybed on a soft, clean surface to prevent scratching the finish.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
3. Package Contents
Verify that all parts are present and undamaged before beginning assembly. The package should contain the following:
- Daybed frame components (headboard, footboard, side rails)
- Wood slats for mattress support
- Support legs
- Hardware pack (screws, bolts, washers, Allen wrench)
- Assembly instructions
If any items are missing or damaged, please contact Merax customer service for assistance.
4. Assembly Instructions
Assembly is required for this daybed. Follow these steps carefully for a successful setup. It is recommended to have two people for assembly.
- Prepare the Area: Clear a spacious area for assembly. Lay out all components and hardware.
- Assemble Side Rails: Attach the side rails to the headboard and footboard using the provided hardware. Ensure all connections are snug but do not overtighten until the frame is fully assembled.
- Install Support Legs: Securely attach any central support legs to the frame as indicated in the detailed diagram.
- Place Wood Slats: Position the wood slats across the frame, ensuring even spacing. Secure the slats to the side rails using the designated fasteners. The slats provide direct support for your mattress, eliminating the need for a box spring.
Figure 4.1: Daybed frame with slats, angled view.
Figure 4.2: Daybed frame with slats, front view.
Figure 4.3: Close-up of slats and frame.
Once all components are assembled, ensure all bolts and screws are fully tightened for stability.
5. Operating Instructions
Your Merax Full Size Daybed is designed for versatile use as both a seating area and a bed.
- Mattress Placement: Place a standard full-size mattress directly onto the wood slats. No box spring is required.
- Under-bed Storage: The design provides ample space underneath the frame, which can be utilized for storage. Consider using storage bins or a pop-up trundle (not included) to maximize this area.
6. Maintenance
Proper care will extend the life and appearance of your daybed.
- Cleaning: Wipe the frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the Espresso finish.
- Hardware Check: Periodically inspect all bolts and screws. Tighten them as needed to maintain stability and prevent squeaking.
- Environmental Conditions: Avoid placing the daybed in direct sunlight or near heat sources, which can cause wood to dry out or warp.
7. Troubleshooting
If you encounter any issues with your daybed, refer to the following common solutions:
- Squeaking Noises: Check all hardware connections and tighten any loose bolts or screws. Ensure slats are properly seated and not rubbing against the frame.
- Instability/Wobbling: Verify that all assembly steps were followed correctly and all hardware is fully tightened. Ensure the daybed is on a level surface.
- Missing or Damaged Parts: If you received the product with missing or damaged components, do not attempt to assemble. Contact Merax customer support for replacement parts.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Merax |
| Model Number | 1 |
| Color | Espresso |
| Size | Full |
| Product Dimensions | 78.3"L x 57.1"W x 34.1"H |
| Material | Pine Wood |
| Finish Type | Wood |
| Assembly Required | Yes |
| Compatible Mattress Size | Full |
| Item Weight | 81.6 pounds |
| UPC | 195358001639 |
Figure 8.1: Daybed Dimensions.
9. Warranty and Support
Merax products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Merax website. For technical support, missing parts, or any other inquiries, please contact Merax customer service directly.
Contact information can typically be found on the Merax website or on your purchase documentation.
