1. Introduction
The dh beauty V100 Extracorporeal Shock Wave Therapy Machine is designed for various therapeutic applications, including muscle pain relief, promotion of blood circulation, support for bone healing, and addressing specific conditions. This device utilizes pulsed sound waves to target affected areas, aiming to provide non-invasive treatment. This manual provides essential information for the safe and effective operation of your device.
2. Safety Information
- Use the device only in dry areas; avoid use near water.
- Do not use the device if it appears damaged.
- Maintain proper body positioning during use to ensure effective and safe application.
- Do not operate the device while it is charging.
- Consult a healthcare professional before use if you have any pre-existing medical conditions.
3. Product Components
The dh beauty V100 system includes the main control unit, a treatment handle, and a variety of interchangeable working heads designed for different applications.
Image 3.1: Overview of the dh beauty V100 Shock Wave Therapy Machine, including the main unit, treatment handle, and a selection of working heads.
Main Unit Components:
Image 3.2: Detailed view of the main unit, highlighting the touch panel, output handle socket, power cord socket, and power cord plug. The treatment handle's key switch is also indicated.
- Touch Panel: For navigating menus and adjusting settings.
- Out Handle Socket: Connection point for the treatment handle.
- Power Cord Socket: For connecting the device to a power source.
- Power Cord Plug: Connects to the power cord socket.
- Key Switch (on handle): Activates and pauses the shock wave application.
Working Heads:
The device comes with 11 different working heads, including various rubber and metal types, each designed for specific applications and treatment areas.
Image 3.3: A selection of working heads, categorized by type (conical, comb, curved, flat rubber heads) and numbered metal heads (1# to 7#), along with rubber sleeves.
4. Setup
- Unpack: Carefully remove all components from the packaging.
- Connect Power: Insert the power cord into the Power Cord Socket on the main unit and then plug it into a suitable electrical outlet.
- Attach Handle: Connect the treatment handle cable to the Out Handle Socket on the main unit. Ensure a secure connection.
- Select Working Head: Choose the appropriate working head for your intended treatment and securely attach it to the end of the treatment handle.
- Power On: Press the power button on the main unit to turn on the device.
- Initial Access Code: If prompted for a password, enter the default code: 23456.
5. Operating Instructions
Follow these steps to operate the dh beauty V100 Shock Wave Therapy Machine:
- Power On: Ensure the device is properly set up and powered on.
- Navigate Interface: Use the touch panel to navigate the basic interface.
Image 5.1: The basic interface displaying various body parts for targeted treatment selection and adjustable parameters like running count, energy, and frequency.
- Select Treatment Area: On the main screen, select the desired body part for treatment (e.g., Wrist, Forearm, Shoulder, Chest, Waist, Buttocks, Thigh, Lower leg, Privacy). The interface also offers 'Low frequency' and 'Currency' options.
- Adjust Parameters: After selecting a treatment area, adjust the following settings using the '+' and '-' buttons on the touch panel:
- Running Count: Recommended range 500-2500.
- Energy: Recommended range 5-250mJ.
- Frequency: Recommended range 1-16Hz.
- Start Treatment: Once parameters are set, click the 'Start' button on the interface.
- Activate Handle: Press the Key Switch on the treatment handle to begin applying shock waves.
Image 5.2: The treatment handle, illustrating the location and function of the key switch for starting, pausing, and resetting the device.
- Pause/Resume: Press the handle switch again to pause the treatment. Press it once more to resume.
- Reset Switch Password: In the start-up preparation state, press and hold the handle switch to reset the switch password.
- Apply to Body: Gently place the selected working head on the target area of the body. Move the handle slowly and steadily over the area.
Image 5.3: Example of the dh beauty V100 device being applied to the lower back for deep relaxation and targeting the fascial layer.
- End Treatment: After the desired duration or count, press the 'Stop' button on the interface and then turn off the device.
6. Maintenance
- Cleaning: After each use, disconnect the device from power. Wipe the main unit, handle, and working heads with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the device in water.
- Storage: Store the device and its accessories in a clean, dry place, away from direct sunlight and extreme temperatures. The provided carrying case (Image 3.4) is ideal for storage and transport.
Image 6.1: The dh beauty V100 device and its components stored securely in the provided carrying case.
- Inspection: Regularly inspect the power cord, handle cable, and working heads for any signs of wear or damage. If any damage is found, discontinue use and contact customer support.
7. Troubleshooting
- Device Does Not Power On:
- Ensure the power cord is securely connected to both the device and a working electrical outlet.
- Verify that the power outlet is functional.
- Handle Not Activating:
- Check if the treatment handle cable is firmly connected to the main unit's 'Out handle socket'.
- Ensure the device is in an active treatment mode on the touch panel.
- If prompted for a password, ensure the correct code (23456) has been entered.
- Irregular Operation:
- Turn off the device, wait a few moments, and then restart it.
- Ensure all connections are secure.
8. Specifications
The following table details the technical specifications of the dh beauty V100 Extracorporeal Shock Wave Therapy Machine:
Image 8.1: Product Information table detailing various parameters of the Shock Wave V100.
| Parameter | Value |
|---|---|
| Product Name | Shock Wave V100 |
| Model Number | V100 |
| Power | 100W Max |
| Frequency Gears | 16 |
| Output Energy Levels | 27 |
| Number of Probes | 11 |
| Product Dimensions | 7.87 x 5.71 x 2.56 inches |
| Item Weight | 1.39 Pounds (0.63 Kilograms) |
| Material | Plastic |
| Power Source | Corded Electric |
| Voltage | AC110V-AC220V |
| Frequency | 50HZ/60HZ |
| Electric Current | 2A Max |
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
10. Legal Disclaimer
Statements regarding this device have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for personal use and should not replace professional medical advice or treatment.