1. Introduction
The SOLEM WooBee 1 Station Bluetooth Irrigation Programmer is designed for efficient and automated garden watering. This device combines a user-friendly physical interface with advanced Bluetooth connectivity, allowing for flexible programming via its integrated display or the MySolem mobile application. Its robust, waterproof design ensures reliable operation in various outdoor conditions.
2. Safety Information
- Ensure proper battery installation as specified in the setup section. Incorrect battery polarity can damage the device.
- Do not expose the device to extreme temperatures outside its operating range (-20°C to 60°C).
- While the device is IP68 waterproof, avoid submerging it for extended periods or at depths beyond its rating.
- Keep the device out of reach of children.
- Disconnect power before performing any maintenance or connection changes.
3. Package Contents
Verify that all components are present in the package:
- SOLEM WooBee 1 Station Irrigation Programmer Unit
- User Manual (this document)
- (Batteries are not included and must be purchased separately)
4. Product Features
- Station Capacity: 1 station.
- Communication: Bluetooth for wireless connectivity.
- Power Supply: Operates on a 9V battery or 4 AAA batteries (not included).
- Waterproof Rating: IP68 certified, ensuring high resistance to dust and water.
- Dimensions (L x H x W): Approximately 14 cm x 5.5 cm x 9 cm.
- Display: Large LCD for clear visibility of settings and status.
- Programming Options: Via physical keypad on the device, MySolem mobile app (smartphone/tablet), or MySolem.com web platform.
- Compatibility: Designed for use with 9V latching solenoids.
- Sensor Input: Supports connection of a flow sensor or rain sensor.
- Operating Temperature: -20°C to 60°C.
5. Setup
5.1. Battery Installation
The WooBee programmer can be powered by either a 9V battery or four AAA batteries. Ensure the battery compartment is clean and dry before installation.
- Locate the battery compartment cover on the device.
- Carefully open the cover.
- Insert the chosen batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Securely close the battery compartment cover to maintain the IP68 waterproof seal.
5.2. Physical Installation and Wiring
Mount the programmer in a location protected from direct sunlight and extreme weather, yet accessible for programming and maintenance. Connect the 9V latching solenoid to the designated output terminal. The maximum distance to the solenoid should not exceed 30 meters.
If using a flow or rain sensor, connect it to the dedicated sensor input terminal. Refer to the sensor's manual for specific wiring instructions.
5.3. Initial Device Overview
Image 1: Front view of the SOLEM WooBee 1 Station Bluetooth Irrigation Programmer.
This image displays the device's front panel, featuring a large LCD screen at the top. The screen shows various icons for information (INFO), manual operation (MAN), programming (PROG), on/off status (ON/OFF), and date settings (DATE), along with a battery level indicator. The time "08:00 AM" and date "18/08/18" are visible, along with indicators for days of the week (Mo, Tu, We, Th, Fr, Sa, Su). Below the screen are four circular control buttons arranged in a diamond pattern, used for navigation and selection. The SOLEM logo is subtly visible at the bottom of the device.
6. Operation
6.1. Programming via Device Keypad
The WooBee programmer features a physical keypad for direct programming. Use the navigation buttons (up, down, left, right) to move through menus and adjust settings. The central button typically acts as an 'Enter' or 'Select' key.
- Setting Time and Date: Navigate to the 'DATE' menu to set the current time and date.
- Manual Operation: Use the 'MAN' option for immediate manual watering.
- Program Setup: Access the 'PROG' menu to define watering schedules, including start times, duration, and days of the week.
- On/Off: The 'ON/OFF' option allows you to enable or disable the irrigation system.
- Information: The 'INFO' menu provides system status and diagnostic information.
6.2. Programming via MySolem App
For advanced programming and remote control, download the free "MySolem" app from your smartphone's or tablet's app store. Alternatively, access the "MySolem.com" web platform.
- Ensure Bluetooth is enabled on your mobile device.
- Open the MySolem app and follow the on-screen instructions to pair with your WooBee programmer. The device should appear as "WooBee [Serial Number]".
- Once connected, you can manage all programming aspects, view watering history, and receive alerts directly from the app.
- The app provides a more intuitive interface for setting complex schedules, adjusting seasonal watering percentages, and managing sensor inputs.
7. Maintenance
- Battery Replacement: Replace batteries annually or when the low battery indicator appears on the display. Use high-quality alkaline batteries for optimal performance.
- Cleaning: Periodically wipe the device with a damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Winterization: In regions with freezing temperatures, disconnect the programmer from the irrigation system and store it indoors to prevent frost damage. Remove batteries before storage.
- Seal Integrity: Regularly inspect the battery compartment seal for any signs of wear or damage to ensure its waterproof integrity.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Dead or incorrectly installed batteries. | Check battery polarity. Replace with fresh 9V or AAA batteries. |
| No water flow. | Solenoid issue, water supply off, or programming error. | Verify water supply. Check solenoid connection. Review programming schedule. |
| Cannot connect via Bluetooth. | Bluetooth off on mobile device, device out of range, or app issue. | Ensure Bluetooth is enabled. Move closer to the programmer. Restart the MySolem app or mobile device. |
| Display is blank or dim. | Low battery or extreme temperature. | Replace batteries. Move device to within operating temperature range. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | SOLEM |
| Model | WooBee 1 Station |
| Power Source | 9V battery or 4 AAA batteries |
| Waterproof Rating | IP68 |
| Communication | Bluetooth |
| Operating Temperature | -20°C to 60°C |
| Dimensions (L x H x W) | 14 cm x 5.5 cm x 9 cm |
| Compatible Solenoids | 9V latching solenoids |
| Sensor Input | Flow sensor or Rain sensor |
10. Warranty and Support
For warranty information and technical support, please refer to the official SOLEM website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.
For the MySolem app, visit the respective app store (Apple App Store or Google Play Store) for updates and support resources. For web platform support, visit MySolem.com.
