Oxford LK217 Alpha XA14 Alarm Disc Lock User Manual

Introduction

The Oxford Alpha XA14 is a robust alarm disc lock designed to enhance the security of your motorcycle or scooter. It features a 14mm T-locking pin and an integrated 110dB alarm siren to deter theft. This manual provides essential information for the proper setup, operation, and maintenance of your disc lock.

Image: The Oxford LK217 Alpha XA14 Alarm Disc Lock in yellow and black, shown attached to a motorcycle brake disc for security.

Product Features

• 110dB Alarm Siren: Integrated alarm system to alert to tampering.
• Rechargeable LiPo Battery: Powers the alarm function.
• 14mm T-Locking Pin: Provides strong resistance against cutting and prying.
• Sold Secure Standard Tested: Certified for security performance.
• Minder Cable Supplied: A reminder cable to prevent riding off with the lock engaged.
• Key Exchange Service: Allows for new keys to be created if all original keys are lost.

Package Contents

Upon opening the package, please ensure all the following items are present:

• Oxford LK217 Alpha XA14 Alarm Disc Lock (Yellow/Black)
• Keys (typically 3)
• Minder Cable
• Charging Cable (for LiPo battery)

Setup

1. Initial Charge: Before first use, fully charge the integrated LiPo battery using the provided charging cable. Connect the cable to the lock's charging port and a suitable USB power source. The charging indicator will show when charging is complete.
2. Key Registration: Locate the key number provided with your keys. It is recommended to record this number and store it in a safe place, separate from the keys. This number is essential for utilizing the key exchange service if you lose all your keys.
3. Familiarization: Practice locking and unlocking the device a few times without it on your vehicle to understand its mechanism and alarm arming sequence.

Operating Instructions

1. Applying the Lock:
   • Position the lock over a brake disc on your motorcycle or scooter, ensuring the 14mm T-locking pin passes through a ventilation hole in the disc.
   • Push the locking mechanism firmly until it clicks into place.
   • A single beep indicates the lock is armed and the alarm is active.
2. Alarm Function:
   • Once armed, the alarm will activate if the lock detects significant movement or tampering.
   • The 110dB siren will sound to deter potential thieves.
3. Removing the Lock:
   • Insert the key into the lock cylinder and turn it to the unlock position.
   • The alarm will disarm, and the locking pin will retract, allowing you to remove the lock from the disc.
4. Using the Minder Cable: Attach one end of the minder cable to the disc lock and the other end to your handlebar. This serves as a visual reminder to remove the lock before attempting to ride your vehicle.

Maintenance

• Battery Charging: Regularly check the battery status. When the battery is low, the alarm may emit a specific low-battery warning sound (refer to product packaging for specific indicator). Recharge the LiPo battery promptly to ensure continuous alarm functionality.
• Cleaning: Keep the lock clean from dirt and debris. Use a soft, damp cloth to wipe the exterior. Avoid using harsh chemicals or abrasive cleaners.
• Lubrication: Periodically apply a small amount of lock lubricant (e.g., graphite-based) to the keyhole and locking mechanism to ensure smooth operation.
• Storage: When not in use, store the disc lock in a dry place, away from extreme temperatures.

Troubleshooting

Alarm Not Sounding or Weak:

Possible Cause: Low battery.

Solution: Recharge the LiPo battery fully.

Possible Cause: Alarm sensitivity setting (if adjustable, refer to product packaging for details).

Solution: Ensure the lock is armed correctly. Some users have noted that the alarm sensitivity may require significant movement to trigger. Test the alarm by gently moving the locked vehicle.

Lock Not Fitting Brake Disc:

Possible Cause: The 14mm pin is too large for the disc's ventilation holes, or the lock body does not clear the disc/wheel components.

Solution: Verify the compatibility of the lock with your specific motorcycle or scooter model before purchase. If it does not fit, it may be necessary to use a different security device.

Key Difficult to Turn or Lock Mechanism Stiff:

Possible Cause: Dirt or lack of lubrication in the keyhole/mechanism.

Solution: Clean the keyhole and apply a small amount of lock lubricant.

Specifications

Warranty and Support

The Oxford LK217 Alpha XA14 Alarm Disc Lock comes with a manufacturer's warranty. Please refer to the specific terms and conditions provided with your purchase for full details.

• Manufacturer Warranty: 90 days (as per product specifications).
• For technical support, warranty claims, or inquiries regarding the key exchange service, please contact Oxford Products Ltd. directly through their official website or customer service channels.