HyperGear 14294
HyperGear Sport True Wireless Earbuds User Manual
Model: 14294 | Brand: HyperGear
Introduction
This manual provides detailed instructions for the HyperGear Sport True Wireless Earbuds, designed for an active lifestyle. Learn how to set up, operate, and maintain your earbuds for optimal performance and longevity.
Product Overview
The HyperGear Sport True Wireless Earbuds offer immersive HD stereo sound, quick-pair technology, and a noise-cancelling microphone for clear calls. Their ergonomic secure-fit ear hooks ensure stability during intense workouts, and the sweatproof design provides durability for active use.
Image: HyperGear Sport True Wireless Earbuds shown with their retail packaging, highlighting the secure-fit design.
Image: Close-up of a HyperGear earbud with callouts for HD Stereo Sound, Quick-Pair Technology, Crystal Clear Conversations, Control at Your Fingertips, and Superior Battery Life.
What's in the Box
Your HyperGear Sport True Wireless Earbuds package includes:
- HyperGear Sport True Wireless Earbuds
- Charging Case
- Charging Cable
- User Manual
- S | M | L Ear Gels
- Travel Pouch & Carabiner
Image: The earbuds connected to a charging cable, alongside a travel pouch, carabiner, and different sized ear gels, illustrating the included accessories.
Setup
Charging the Earbuds
Before first use, fully charge your earbuds. Connect the charging cable to the earbuds and a power source. A full charge takes approximately 2 hours. A quick 10-minute charge provides an extra hour of playtime.
Image: The HyperGear Sport True Wireless Earbuds connected via their charging cable, indicating the charging process.
Pairing with Your Device
- Ensure the earbuds are charged and powered on.
- Activate Bluetooth on your device (smartphone, tablet, etc.).
- Search for "HyperGear Sport X2" or similar in your device's Bluetooth settings.
- Select the earbuds to pair. A voice prompt will confirm successful connection.
The quick-pair technology ensures a stable connection up to 33 feet.
Image: A smartphone screen displaying Bluetooth settings, showing the HyperGear Sport X2 earbuds as connected, illustrating the pairing process.
Operating Instructions
Power On/Off
Press and hold the On/Off button on the earbud for approximately 3 seconds to power on or off.
Music Playback
- Play/Pause: Single press the multi-function button.
- Next Track: Double press the multi-function button on the right earbud.
- Previous Track: Double press the multi-function button on the left earbud.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
Call Management
- Answer/End Call: Single press the multi-function button.
- Reject Call: Press and hold the multi-function button for 2 seconds.
The built-in noise-cancelling microphone ensures clear conversations.
Image: A detailed view of the earbud showing the microphone, volume adjustment buttons, and on/off fingertip control, along with an operating range of 33 feet.
Maintenance
- Clean the earbuds regularly with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents.
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Keep away from extreme temperatures and humidity.
- The earbuds are sweatproof and water-resistant, but not fully waterproof. Do not submerge them in water.
Troubleshooting
| Problem | Solution |
|---|---|
| Earbuds won't turn on. | Ensure earbuds are fully charged. Press and hold the power button for 3-5 seconds. |
| Cannot pair with device. | Make sure Bluetooth is enabled on your device and the earbuds are in pairing mode. Move closer to the device (within 33 ft). Forget the device in Bluetooth settings and re-pair. |
| Sound is distorted or cuts out. | Check the distance between earbuds and device. Ensure no obstacles are blocking the signal. Recharge earbuds if battery is low. |
| Microphone not working. | Ensure the earbuds are properly connected. Check device's audio input settings. |
Specifications
- Connectivity Technology: Bluetooth
- Wireless Communication Technology: Bluetooth
- Bluetooth Version: 5.0
- Bluetooth Range: 33 Feet
- Battery Life: Up to 4 Hours playtime
- Charging Time: 2 Hours (10 min quick charge for 1 hour playtime)
- Control Type: Media Control (Touch/Button)
- Noise Control: Active Noise Cancellation (for mic)
- Water Resistance Level: Water Resistant (Sweatproof)
- Frequency Range: 20 Hz - 20,000 Hz
- Item Weight: 4.6 ounces
- Product Dimensions: 2.36 x 1.18 x 1.18 inches
- Model Number: 14294
Warranty and Support
HyperGear products are designed for quality and performance. For warranty information or technical support, please visit the official HyperGear website or contact their customer service. Details can typically be found on the product packaging or the brand's official online store.
Online Support: Visit the HyperGear Store on Amazon
Related documents14294
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.