Igloo Bottom Loading Water Cooler Dispenser Instruction Manual

1. Introduction

Thank you for choosing the Igloo Bottom Loading Water Cooler Dispenser. This appliance provides convenient access to hot, cold, and room temperature water, suitable for various settings including homes, offices, and dormitories. Its bottom-loading design eliminates the need for heavy lifting and reduces spills, while the child safety lock on the hot water spigot ensures safe operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Important Safety Information

To reduce the risk of injury, property damage, or electric shock, always follow basic safety precautions when using this appliance.

• Electrical Safety: Ensure the unit is plugged into a grounded outlet. Do not use extension cords. Unplug the dispenser before cleaning or performing any maintenance.
• Hot Water Safety: The hot water dispensed can reach high temperatures and cause burns. Always use the child safety lock when dispensing hot water, especially around children.
• Placement: Place the dispenser on a firm, level surface. Allow at least 4 inches of clearance from walls for proper ventilation. Do not install near heat sources or in direct sunlight.
• Water Quality: Use only potable (drinkable) bottled water. Do not use any other liquids.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
• Initial Setup: Do not plug in the unit until water has been drawn through both the hot and cold spigots to ensure the tanks are filled. Operating the hot water tank without water can cause damage.

3. Product Overview

Familiarize yourself with the components of your Igloo Water Cooler Dispenser.

Figure 3.1: Front View of the Igloo Bottom Loading Water Cooler Dispenser. This image displays the sleek stainless steel and black design of the water cooler, with a glass being filled with water from the dispenser. The bottom loading compartment is visible, housing a 5-gallon water jug.

• Dispensing Spigots: Separate spigots for hot, cold, and room temperature water.
• Control Panel: Features indicator lights for power, heating, and cooling, along with dispensing buttons.
• Child Safety Lock: Located on the hot water spigot to prevent accidental dispensing.
• Bottom Loading Compartment: Designed to hold 3 or 5-gallon water jugs, eliminating heavy lifting.
• Removable Drip Tray: Catches spills and drips for easy cleaning.

Figure 3.2: Dispensing Controls. A close-up view of the top section of the water cooler, highlighting the three dispensing buttons for steaming hot water (with safety lock), room temperature water, and refreshing cold water.

Figure 3.3: Bottom Loading Mechanism. This image shows the lower door of the water cooler open, revealing a 5-gallon water bottle placed inside the bottom-loading compartment. This design simplifies bottle replacement.

4. Setup Instructions

Follow these steps for initial setup of your water cooler.

1. Unpack the Unit: Carefully remove all packaging materials. Retain packaging for future transport if needed.
2. Placement: Position the water cooler on a flat, stable, and level surface. Ensure there is at least 4 inches (10 cm) of space from the back and sides of the unit to allow for proper air circulation. Avoid direct sunlight or heat sources.
3. Initial Cleaning: Before first use, wipe down the exterior with a soft, damp cloth. Clean the drip tray.
4. Install Water Bottle:
   • Open the bottom compartment door.
   • Remove the cap from a new 3 or 5-gallon water bottle.
   • Insert the siphon tube (provided) into the water bottle, ensuring it reaches the bottom.
   • Slide the water bottle into the compartment and close the door securely.
5. Prime the System: Before plugging in the unit, place a cup under each spigot (hot, cold, room temperature) and press the dispensing button until water flows steadily from each. This ensures the internal tanks are filled and prevents damage to the heating element.
6. Connect Power: Plug the power cord into a grounded 120V AC outlet. The indicator lights will illuminate.
7. Allow to Cool/Heat: Allow approximately 15-30 minutes for the water to reach optimal cold and hot temperatures before first use.

5. Operating Instructions

Dispensing water from your Igloo water cooler is simple.

1. Dispensing Cold Water: Place your cup under the cold water spigot. Press the blue cold water button. Release the button when your cup is full.
2. Dispensing Room Temperature Water: Place your cup under the room temperature water spigot. Press the green room temperature button. Release the button when your cup is full.
3. Dispensing Hot Water (with Child Safety Lock):
   • Place your cup under the hot water spigot.
   • Simultaneously slide the red child safety lock button and press the red hot water dispensing button.
   • Release both buttons when your cup is full. Always ensure the child safety lock is engaged after use.
4. Indicator Lights: The front panel features lights indicating power status, heating cycle, and cooling cycle. These lights will turn on and off as the unit maintains desired temperatures.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your water cooler.

• Cleaning the Drip Tray: The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. Simply slide it out, empty, wash with mild soap and water, rinse, and replace.

Figure 6.1: Removable Drip Tray. This image illustrates the removable drip tray being taken out for cleaning, alongside examples of hot tea and cold water being dispensed.

• Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Internal Cleaning/Descaling: Periodically, the internal water tanks may require cleaning or descaling. Consult the manufacturer's website or customer support for recommended procedures and cleaning solutions. Always unplug the unit and drain all water before internal cleaning.
• Replacing Water Bottle: When the 'Water Empty' indicator illuminates, replace the water bottle following the steps in Section 4.

7. Troubleshooting

Refer to this section for common issues and their solutions.

8. Specifications

Key technical details for your Igloo Water Cooler Dispenser.

• Model: Bottom Loading Water Cooler
• ASIN: B08B261RZH
• UPC: 082677002877
• Color: Stainless
• Material: Stainless Steel
• Capacity: Holds 3 & 5 Gallon Jugs
• Product Dimensions (D x W x H): 12" x 15.16" x 41.73"
• Item Weight: 34 pounds
• Installation Type: Freestanding
• Access Location: Bottom
• Power Source: Corded Electric
• Manufacturer: Nostalgia Products

Figure 8.1: Product Dimensions. This image shows the Igloo water cooler with its key dimensions labeled: 12 inches deep, 15.2 inches wide, and 41.7 inches high.

9. Warranty and Customer Support

For warranty information, technical assistance, or to inquire about replacement parts, please contact Igloo customer support. Refer to your product packaging or the official Igloo website for the most current contact details and warranty terms.

Online Support: Visit the official Igloo website for FAQs and support resources.

Contact Information: Please refer to the contact details provided with your purchase or on the manufacturer's website.