Holyton 1:10 Scale High Speed RC Car User Manual

1. Introduction

Welcome to the user manual for your new Holyton 1:10 Scale High Speed Remote Control Car. This powerful 4WD off-road monster truck is designed for thrilling experiences with its impressive speed and all-terrain capabilities. Please read this manual thoroughly before operating the vehicle to ensure safe and optimal performance.

Safety Warnings

• Recommended for ages 8 and up. Adult supervision is advised.
• Do not operate the RC car on public roads, near people, or in crowded areas to prevent accidents.
• Keep hands, hair, and loose clothing away from moving parts.
• Always turn off the car and remote controller when not in use.
• Ensure batteries are charged correctly and handled safely.

2. What's in the Box

Upon unpacking, please verify that all the following components are included:

• Holyton 1:10 Scale RC Car
• 2.4GHz Remote Controller
• 2 x 1800mAh Lithium Ion Batteries
• USB Charging Cable
• Small Bag of Spare Parts
• Lug Wrench
• User Manual

Image: Holyton 1:10 Scale RC Car with its remote controller, two rechargeable batteries, USB charging cable, and maintenance tools.

3. Product Features

• 1:10 Realistic Scale High Speed RC Car: Equipped with all-terrain tires and an upgraded powerful motor, this RC car can achieve speeds of up to 48 Km/h. Its full-scale speed control offers smooth speed variation and high-frequency acceleration, providing a realistic driving experience.

Image: The Holyton RC car demonstrating its high-speed capability on a stylized track.
• 4WD Metal Oil Shock Absorbers: This 4-wheel drive car features independent suspension and metal oil shock absorbers, effectively protecting the car from crashes and drops. This design increases durability and provides excellent all-around driving capability, allowing the car to traverse water, mud, sand, grass, and other challenging conditions.


Image: An exploded view diagram illustrating the 4WD independent suspension system, including the motor, differentials, and shock absorbers.

• 2.4Ghz Anti-Interference Control System: The 2.4G frequency ensures quick-responsive control with a maximum operating range of up to 100M (330ft), significantly farther than many other RC cars. This system allows for racing alongside other vehicles without interference. This hobby-grade truck is suitable for beginners and intermediate users.


Image: A detailed view of the 2.4GHz remote controller, highlighting its various control functions.

• High Toughness Shell and Reinforced Body Frame: The truck's entire shell is constructed from high-toughness PVC material, providing superior collision resistance and extending its lifespan. A reinforced body frame enhances the car's grip during racing.

Image: An illustration highlighting the reinforced body frame for enhanced durability.
• Extended Driving Time and Worry-less Play: Comes with two powerful 1800mAh rechargeable batteries, extending the driving time up to 40 minutes. Protective functions such as waterproofing, low voltage detection, and thermal shutdown protection make this car suitable for all ages.


Image: The RC car alongside its two batteries, emphasizing the extended 40-minute run time.



Image: An illustration depicting the two high-capacity batteries providing extended power to the RC car.

4. Setup

4.1 Battery Charging

1. Connect the USB charging cable to the battery.
2. Plug the USB end into a compatible USB power adapter (e.g., computer USB port, phone charger).
3. The indicator light on the charging cable will show charging status (refer to charger's specific light indicators for details).
4. Charging typically takes 2-3 hours per battery. Do not overcharge.

4.2 Battery Installation

For the RC Car:

1. Remove the body clips and lift the RC car's shell.
2. Carefully insert a charged 1800mAh Lithium Ion battery into the battery compartment.
3. Connect the battery connector to the car's power port. Ensure a secure connection.
4. Replace the car shell and secure it with the body clips.

For the Remote Controller:

1. Open the battery compartment cover on the back of the remote controller.
2. Insert 3 x AA batteries (not included) according to the polarity markings.
3. Close the battery compartment cover.

4.3 Pairing the Remote Controller

1. Ensure the RC car's battery is connected and the car's power switch is OFF.
2. Turn on the remote controller. The indicator light will blink.
3. Turn on the RC car's power switch.
4. The remote controller's indicator light should become solid, indicating successful pairing. If not, turn both off and repeat the process.

5. Operating Instructions

5.1 Basic Controls

• Throttle Trigger: Pull to move forward, push to brake/reverse.
• Steering Wheel: Turn left to steer left, turn right to steer right.
• Speed Switch: Adjusts the maximum speed of the car. Useful for beginners or indoor use.
• Steering Trim: Fine-tunes the steering to ensure the car drives straight when the steering wheel is centered.

5.2 Driving Tips

• Start with the speed switch set to a lower setting until you are comfortable with the controls.
• Practice in an open area free from obstacles and people.
• The 4WD system and durable design allow for driving on various terrains including grass, dirt, and gravel.
• Avoid prolonged operation in deep water or extremely muddy conditions, despite its waterproof features, to prolong component life.

6. Maintenance

6.1 Cleaning

• After each use, especially after off-road driving, clean dirt and debris from the car's chassis, wheels, and suspension components.
• Use a soft brush or compressed air to remove dust. A damp cloth can be used for the body shell.
• Do not use harsh chemicals or solvents.

6.2 Battery Care and Storage

• Always disconnect batteries from the car and charger when not in use.
• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, it is recommended to charge Lithium Ion batteries to about 50% capacity.

6.3 General Inspection

• Regularly check for loose screws, connections, or damaged parts. Tighten or replace as necessary.
• Inspect tires for wear and tear.
• Ensure the heat sink on the motor is not covered to allow for proper cooling.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Holyton products are manufactured to high quality standards. For any questions, technical support, or warranty inquiries, please contact Holyton customer service. Please refer to the packaging or the official Holyton website for the most up-to-date contact information.

Keep your purchase receipt as proof of purchase for warranty claims.