PARTPHONER PA-WL-2
PARTPHONER Outdoor Wall Mount Light Fixture
Model: PA-WL-2
Brand: PARTPHONER
Introduction
Thank you for choosing the PARTPHONER Outdoor Wall Mount Light Fixture. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
- Always turn off the power at the main circuit breaker before installing, servicing, or replacing any part of the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Do not exceed the maximum wattage specified for the bulb (60W).
- Handle glass components with care to prevent breakage.
- This fixture is designed for outdoor use and is waterproof and weather-resistant.
What's in the Box
Verify that all components are present before beginning installation:
- Outdoor Wall Mount Light Fixture (2 units)
- Mounting Hardware
- Instruction Manual
Note: Bulb is not included.
Figure 1: Overview of the PARTPHONER Outdoor Wall Mount Light Fixtures.
Specifications
| Feature | Detail |
|---|---|
| Brand | PARTPHONER |
| Color | Black |
| Material | Aluminum, Glass |
| Style | Contemporary |
| Product Dimensions | 5.3"L x 5.7"W x 13.58"H |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | Corded Electric |
| Installation Type | Wall Mount |
| Special Features | Anti-Corrosion, Anti-Rust, Sturdy Glass Shade, Waterproof, Weather Resistant |
| Light Source Type | LED (Compatible) |
| Bulb Base | E26 |
| Maximum Wattage | 60 Watts |
| Voltage | 120 Volts |
| Water Resistance Level | Waterproof |
Figure 2: Product Dimensions and Key Specifications.
Setup and Installation
Follow these steps for proper installation:
- Prepare for Installation: Turn off power at the circuit breaker. Ensure the mounting surface is clean and stable.
- Install Mounting Bracket: Secure the provided mounting bracket to your electrical junction box using the screws.
- Wire Connections: Connect the fixture's wires to your household electrical wires using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure connections are secure.
- Mount the Fixture: Align the fixture with the mounting bracket and secure it using the decorative nuts or screws.
- Install Bulb: Insert an E26 base bulb (max 60W) into the socket. The open bottom design allows for easy access.
- Restore Power: Turn the power back on at the circuit breaker.
Figure 3: Installed light fixture on a patio.
Figure 4: E26 Base Compatibility.
Operating Instructions
Once installed and powered, the light fixture operates via your standard wall switch or external timer/sensor system (not included). Simply toggle the switch to turn the light on or off.
Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Turn off power before replacing the bulb. The open bottom design allows for easy access to the E26 socket. Allow the old bulb to cool before removing.
- Inspection: Periodically inspect the fixture for any signs of damage or wear, especially after severe weather conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power; Loose wiring; Faulty bulb | Check circuit breaker; Verify wire connections; Replace bulb |
| Light flickers | Loose bulb; Loose wiring; Incompatible dimmer (if applicable) | Tighten bulb; Check wire connections; Ensure dimmer compatibility |
| Water inside fixture | Improper sealing during installation | Ensure fixture is properly sealed against mounting surface |
Warranty and Support
For warranty information or technical support, please contact PARTPHONER customer service. Refer to the product packaging or the official PARTPHONER website for contact details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.